Installation Guide

21
22
Operating Instructions
Control Panel
1 - ON/OFF
Press the button once to turn ON the power of ON/OFF the washer. Press
again to turn OFF the unit.
2 - START/PAUSE
2 - Extra Rinse
Press the START PAUSE button once to the start the / wash cycle.
Press the button during operation to pause the cycle. Press again to
continue the cycle.
4 - Program
Press this button to select your desired washing program.
8 - Delay
Press this button to set your desired time to delay start the washer.
Washing a load of laundry
Step 1: Power on your washer
Press the ON/OFF button to power your wash on.
Step 2: Load your washer
To ensure good cleaning results do not overload the tub, especially when washing
heavily soiled loads. Never load the tub more than 3/4 full.
Step 3: Load your washer
7 - Load Size
Press this button to set your washing load size. Your
setting will decide
the water level throughout all steps in the cycle.
The control lock function can help to prevent children
from changing the
operation status of the unit.
5 - CONTROL LOCK
Operating Instructions
Sort laundry by fabric type, soil level, color and load size as
needed. Refer to the Fabric Care Chart in the APPENDIX.
You can fill the tub with dry, unfolded clothes ,but DO NOT
OVERLOAD the tub. Load the tub no more than 3/4 full.
Before loading your laundry, be sure to take out coins,
keys and other hard objects, and close all zippers to
prevent the clothes from damage.
Note: To add a forgotten item:
Overloading may reduce washing efficiency, cause excess wear, and possibly
cause creasing or wrinkling of items in the load.
1. Press the button to pause the washer.
2. Wait for the tub to stop turning, then open the door.
3. Add the item, close the door, and then press the START PAUSE button. The
cycle will resume.
START/PAUSE
/
WARNING
WARNING
9
45
6
7
1
2
8
10
ON/OFF
9 - Digital display
The digital display will show and count down the
estimated minutes for the
wash cycle selected. Or, if Delay Start is set, the display will count down the
hours until the cycle begins, and then change to a minute countdown for the
wash cycle.
Normal (light)
Heavy (light)
Delicate (light)
Quick (Flash)
Bulky (Flash)
Spin Only (Flash)
6 - Temperature
Press this button to select water temperature for
Cold light only indicates Cold Water selection .
Warm light only indicates Warm Water selection .
Hot light only indicates Hot Water selection.
washing.
Press the EXTRA RINSE button to add one rinse.
10 - Procedure
Press this button to select cycle steps included in your
related light will be ON indicating that the step is selected.
setting cycle. The
Normally, all Soak Wash , Rinse and Spin
lights ON.
, steps are included with all