INSTRUCTION MANUAL LCD TV RLCVD1924
Table of Contents Safety Information 2 Important Safety Precautions 3 INSTALLATION 4-6 Front/Back panel diagram 7-8 Remote Controller Battery Installation Using the Remote Control 9-10 Install TV Set your TV Connect Antenna and power Turn On TV 11 12-13 PICTURE MENU 13 SOUND MENU 13 TUNE MENU 14 FUNCTION MENU 14 PARENT CONTROL 15 CHANGE PASSWORD 15 TV RATOMG 16 OSD MENU 16 PC MENU 16 COLOR TEMP 17 GEOMETRY 17 DVD Setup 18-24 RESOLUTION 25 HELP 26 SPECIFICATIONS 27 1
2
Read these instructions . Keep these instructions . Heed all warnings . Follow all instructions . Please refer to the specification sheet on page 21 for the character of this TV set . Do not break the earth pin of the plug , if the plug can not fit the electrical outlet , please turn to the professional for help .
INSTALLATION STANDARD INSTALLATION The TV can be installed in various ways such as on a wall, or on a desktop etc. 10inches 10inches 10inches 10inches 10inches The TV is designed to be mounted horizontally. Ensure that you connect the earth ground wire to prevent possible electric shock. if grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
STANDARD INSTALLATION b. Wall Mount: Horizontal installation (1) Secure the wall brackets with the bolts(not provided as parts of the product, must purchase separately) on the wall.Match the height of the bracket that is mounted on the wall. The wall bracket is of nomal dimension. Please see the position of the wall brackets bolts as follow picture. The actual dimension of the wall brackts bolt should according to the products.
NOTES OF WALL INSTALLATION (1) Keep the TV stand for may be future use. (2) Don’t set the TV set on shelves, carpets, beds, or closets. (3) Don’t cover the TV with curtain or paper.
Front/Back panel diagram DVD 7
Front/Back panel diagram 9 15 14 INPUT R1 L1 VIDEO 1 S-VIDEO OUTPUT R L 16 VIDEO R2 Pr L2 Pb VIDEO 2 Y 4A HDMI (3.5mm) YPbPr:Color difference components input and relevant video input S-VIDEO: Color and brightness difference components input. AV Output VGA/AUDIO: VGA audio input. 8 ANT 75 ohm: Connect the antenna to the antenna input. HDMI Input: Digital signal input from HDMI video connector 14/15. VIDEO/R/L 1/2 : external AV signal input and relevant right/left sound channel. 16.
Remote Controller 1 POWER : Sets your TV to power on or standby mode. 5 CH +/- : Press to scan through or to select a channel. 6 V +/-: Press to increase / decrease the sound level. 7 - /- Press this button to enter a program number for different digit. eg. -/ - - / --8 DISPLAY : Press to display the source and channel's info. 1 2 3 4 5 6 7 8 9 0 P.MODE S.MODE SLEEP MTS 2 14 CH + 1B 13 MENU SOURCE 7 9 6 9 MUTE POWER 4 1 2 MUTE : Press to mute the sound.
Remote Controller 17/19/20/21/31. ENTER When the DVD menu or system menu display on the TV screen and wait for selection, press these buttons to select an item in a menu. Moves an enlarged picture up/down/left/right. Press this button to confirm a selection. 1 2 3 4 5 6 7 8 9 0 P.MODE S.
side DC 12V 4A Adaptor 3 indicator 11
DVD 7 12
Press Menu to exit sub-menu.
14
G PG X NONE C Empty 18+ Empty R PG13 NC17 G C8+ 14+ G 18 ANS + PG 8 ANS + 13 ANS + 16 ANS + 15
16
17
Overview of Remote Control TITLE BUTTON DVD Mode Press TITLE button, there will have an screen indication "TITLE" Press the direction or numeric buttons to select your favourite title. Will play from the first chapter of the selected title.(for DVD disc only) D.ENTER D.ENTER: Validation key. (bottom section of D.ENTER button for DVD function only) When in DVD mode , use the arrows in the bottom section of the remote to operate the menus etc.
PLAY AND PAUSE BUTTON( ) Press this button to start playback. Press this button again to pause playback. STOP BUTTON( ) Press STOP button once to stop. Press to resume from where you stopped. button Press STOP button Twice to stop. Press button to start from beginning. In order to protect the disc, press STOP button then press OPEN/CLOSE button to take the disc out. When the disc is ejected, hold the disc edge to prevent scratches.
ANGLE OF CHOICE Press “ANGLE” then you can enjoy the picture with different angle when you play multi-angle picture. Multi-angle means that take a photo from different scene.
DVD Setup Menu Interface Function 21
22
23
Disc Care Care of Disc Video disc contains high-density compressed data that needs proper handling. 1. Hold the disc with fingers by outer edge and/or the center spindle hole. Do not touch the discs surface. 2.Do not bend or press the disc. 3.Do not expose the disc to direct sunlight or heating sources, Stere discs in cabinet vertically, and in dry condition.
25
HELP No Power Signal receive not properly No picture Video is ok ,but without audio Audio is ok, but color error or no picture. snow statics picture and noise Level broken line Dual-Image or "simulacrum" The TV no response with the Remote. NO Video In. (PC Mode) Vertical twinkling (PC Mode) horizontal ripping (PC Mode) The screen is too bright or too dark (PC Mode) PC Function no response Ripping line in RCA connecting Problem still exist Check the AC cord of TV is plus in or not.
SPECIFICATIONS Screen Size TV system Video system Preset Channels Input/Output Audio output power 19” NTSC M PAL M/N NTSC/PAL AIR：2-69 CATV：1-125 IN: VGA, A/VX2, S-VIDEO, HDMI, Y PBPR, PC Audio input ANT 75Ω. OUT: EARPHONE, A/V. Built-in DVD player. 3Wx2 Power requirement DC 12V Max. power consumption <48W Accessories 4A User's manual Remote controller AC adaptor 2 x AAA Batteries Power cord Supporting DVD Format This product can play the following DVD formats disc.
