INSTRUCTION MANUAL LCD TV RLC2609
Table of Contents Caution 2 Important Safety Precautions 3 Desktop TV Bracket Installation & Assembly 4 Front/Back panel diagram 5 Remote Controller Battery Installation Using the Remote Control 6 Install TV Set your TV Connect Antenna and power Turn On TV 7 Systems Connection AV Input S-Video Input PC Input HDMI Input Y Pb Pr Input 8-10 ADVANCE Sleep Timer TTX Language Auto Format EARPHONE Output PICTURE Picture Mode Contrast Brightness HUE Saturation Sharpness Color Temp Scale Mode 3D NR M
Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Caution: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.2 19) Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). 20) Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. These servicing instructions are for use by qualified service personnel only.
Desktop TV Bracket Installation & Assembly cloth not include This products can be mounted on the plasterboard wall or other wall more better.
Side panel diagram OFF ON POWER SWITCH 16 14 9 15 2 PC AUDIO INPUT 1 VGA/AUDIO: VGA audio input. (3.5mm) ANT 75 ohm: Connect the antenna to the antenna input. HDMI1 Input: Digital signal input from HDMI video connector 14/15. VIDEO/R/L 1/2 : external AV YPbPr: Color difference components input and relevant video input S-VIDEO: Color and brightness difference components input. AV Output signal input and relevant right/left sound channel. 16.
Remote Controller 1. POWER : Sets your TV to power on or standby mode. 2. MUTE : Press to mute the sound. Press again or press VOL+ to unmute. 3. 0--9 Press 0~9 to select a TV channel directly while watching TV. The channel will change after 2 seconds.Applicable for entering page number in teletext mode and so on. 4. : Return to the previously viewed program. 5. CH +/- : Press to scan through or to select a channel. 6. V +/-: Press to increase / decrease the sound level. 7.
side 3 indicator 7
Systems Connection 1.AV INPUT/OUTPUT Video / Audio input, use the SOURCE button select AV on the remote control . 2 PC AUDIO INPUT 1 Second TV AV INPUT VIDEO R L L R VIDEO DVD AV OUTPUT Second DVD AV OUTPUT 2.S-VIDEO INPUT S-VIDEO input, use the SOURCE button select S-VIDEO on the remote control .
Systems Connection 3.PC INPUT PC (VGA) input, use the SOURCE button select PC on the remote control . PC AUDIO OUTPUT VGA OUTPUT DVD VGA OUTPUT 2 VGA OUTPUT PC AUDIO INPUT 1 4.HDMI INPUT HDMI input, use the SOURCE button select HDMI on the remote control .
Systems Connection 5.Y Pb Pr Input Y Pb Pr input, use the SOURCE button select Y Pb Pr on the remote control.
PICTURE Picture Mode: Select the picture mode. you can choose “STANDARD,DYNAMIC, SOFT,USER” Contrast: Adjust picture contrast. Brightness: Adjust picture brightness. Tint: Adjust NTSC colour signal. Saturation: Adjust picture color. Sharpness: Adjust picture sharpness. Colour Temp: Adjust picture colour temp: cool, normal, warm mode. Scale Mode: Select picture scale.
Sleep Timer: Select the sleep time to put automatically the TV in standby mode. Timer can be selected as 5min/10min/ 15min/30min/45min/60min/Off. Also you can select the sleep time by pressing SLEEP button repeatedly on the remote control CLOSE CAPTION:Select the caption and TEXT modes(CC1,CC2,CC3,CC4,TT1,TT2,TT3, TT4,OFF). R + + + The originality password is“0000”.
AND + AND + AND + AND + CHANNEL Auto Scan: press " "button to select this item then press Enter button to enter the Auto Channel Search Program. Fine Tuning: if there are something wrong with the quality of picture and sound of TV, press " " to fine tune the tuner frequency, you can get the correct picture and sound. Add/Erase: Add/Erase the Tv channel. Source: select tuning band mode(Available tuning band mode: Air/Cable) MTS:： Press to select the MTS mode.(for example,Nicam , BTSC,MONO,STEREO .
PC you can choose “STANDARD,DYNAMIC, SOFT,USER” GEOMETRY H Position: Adjust the H Position of the PC signal. V Position: Adjust the V Position of the PC signal. Clock: Adjust the clock of the PC signal. Phase: Adjust the phase of the PC signal.
SOURCE SOURCE TV AV AV 2 S-Video Y Pb Pr PC HDMI HDMI 2 1 Press "SOURCE" button to display the source list; 2 Press "▼ / ▲" button to select the "source" you want to watch; 3 Press "ENTER" button to enter the Input source ; :OK RESOLUTION VGA Resolution Vertical frequency Hz 640x480 60/75 800x600 60/75 1024x768 60/75 1360x768 60 HD(Y Pb Pr) Resolution Vertical frequency Hz 480i 60 480p 60 576i 50 576p 50 720p 1080i/p 50/60 50/60 480i 60 480p 60 576i 50 576p 50 720p 1080i/p 50/60 50/60
HELP No Power Signal receive not properly No picture Video is ok ,but without audio Audio is ok, but color error or no picture. snow statics picture and noise Level broken line Dual-Image or "simulacrum" The TV no response with the Remote. NO Video In. (PC Mode) Vertical twinkling (PC Mode) horizontal ripping (PC Mode) The screen is too bright or too dark (PC Mode) PC Function no response Ripping line in RCA connecting Problem still exist Check the AC cord of TV is plus in or not.
SPECIFICATIONS Screen Size Viewing angle TV system Video system Preset Channels Input/Output Speaker Output 26” 175° (Horizontal) / 175° (Vertical) NTSC PAL/NTSC 1-200 TV, AV, S-Video, YPbPr, PC, HDMI 8 2X7W Power requirement AC 100--240V~, 50/60Hz Power consumption <100W Accessories Remote controller User's manual 2 x AAA Batteries NOTE： This user manual is for reference only. Specifications are subject to change without notice.
