INSTRUCTION MANUAL LCD TV RLC1909
Table of Contents Caution 2 Important Safety Precautions 3 INSTALLATION 4-6 Top/Side panel diagram 7-8 Remote Controller Battery Installation Using the Remote Control 9 Install TV Set your TV Connect Antenna and power Turn On TV 10 11-12 PICTURE MENU 12 SOUND MENU 12 TUNE MENU 13 FUNCTION MENU 13 PARENT CONTROL 14 CHANGE PASSWORD 14 TV RATOMG 15 OSD MENU 15 PC MENU 15 COLOR TEMP 16 GEOMETRY 16 RESOLUTION 17 HELP 18 SPECIFICATIONS 19 1
Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Caution: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.2 19) Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). 20) Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. These servicing instructions are for use by qualified service personnel only.
INSTALLATION STANDARD INSTALLATION The TV can be installed in various ways such as on a wall, or on a desktop etc. 10inches 10inches 10inches 10inches 10inches The TV is designed to be mounted horizontally. Ensure that you connect the earth ground wire to prevent possible electric shock. if grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
STANDARD INSTALLATION b. Wall Mount: Horizontal installation (1) Secure the wall brackets with the bolts(not provided as parts of the product, must purchase separately) on the wall.Match the height of the bracket that is mounted on the wall. The wall bracket is of nomal dimension. Please see the position of the wall brackets bolts as follow picture. The actual dimension of the wall brackts bolt should according to the products.
NOTES OF WALL INSTALLATION (1) Keep the TV stand for may be future use. (2) Don’t set the TV set on shelves, carpets, beds, or closets. (3) Don’t cover the TV with curtain or paper.
Top panel diagram 7
Side panel diagram 9 15 14 INPUT R1 L1 VIDEO 1 S-VIDEO OUTPUT R L 16 VIDEO R2 Pr L2 Pb VIDEO 2 Y 4A HDMI (3.5mm) YPbPr: Color difference components input and relevant video input S-VIDEO: Color and brightness difference components input. AV Output VGA/AUDIO: VGA audio input. 8 ANT 75 ohm: Connect the antenna to the antenna input. HDMI Input: Digital signal input from HDMI video connector 14/15. VIDEO/R/L 1/2 : external AV signal input and relevant right/left sound channel. 16.
Remote Controller 1 POWER : Sets your TV to power on or standby mode. MUTE POWER 4 1 2 MUTE : Press to mute the sound. Press again or press 5 VOL+ to unmute. 1 3 0--9 Press 0~9 to select a TV channel directly while watching 57 TV. The channel will change after 2 seconds.Applicable for 53 entering page number in teletext mode and so on. 47 4 : Return to the previously viewed program. 43 1 2 3 4 5 6 7 8 9 0 P.MODE S.MODE SLEEP MTS 5 CH +/- : Press to scan through or to select a channel.
side DC 12V 4A AV Input/Output S-Video Input AV2 Input/Y Pb Pr Input VGA Input HDMI Input 3 indicator 10
7 11
Press Menu to exit sub-menu.
memory 2. In Advance item, Press menu, as below figure. 2.1. button to enter sub 2.2. 3. OFF 4.
G PG X NONE C Empty 18+ Empty NC17 G C8+ 14+ G 18 ANS + 14 R PG13 PG 8 ANS + 16 ANS + 13 ANS +
CHANNEL 15
16
1366 17
HELP No Power Signal receive not properly No picture Video is ok ,but without audio Check the AC cord of TV is plus in or not. If still no power, please Pull out the plug and replug in after60 seconds. And open the TV again. To cause double image or phantom if there has high building or high mountain round -TV. You can adjust image effect by manually operation: consult instruction of vernier regulation or change the direction of external antenna. If you use the indoor antenna .
SPECIFICATIONS Screen Size TV system Video system Preset Channels Input/Output Audio output power 19” NTSC M PAL M/N NTSC/PAL AIR:2-69 CATV:1-125 IN: VGA, A/VX2, S-VIDEO, HDMI, Y PBPR, PC Audio input ANT 75Ω. OUT: EARPHONE, A/V. 3Wx2 Power requirement DC 12V Max.