User's Manual

ManualsBrandsRCA ManualsMisc ElectronicsRCA RCRBB04GR

4. When you’ve ﬁ nished

entering the ﬁ ve-digit code,

keep holding down the

device key and look at the

POWER key.

Is the POWER key on?

YES: You’re done! You’ve

programmed this device

key.

NO, it blinked four times and turned off: You have

either entered a code number that is not in the code

lists or missed a step in the code entry procedure. Try

step 3 again.

In most cases, the keys on

this remote perform the

same functions as the keys

on your original remotes

once you’ve programmed

this remote to operate your

devices. Many keys on this

remote have other functions

as well.

Device keys (TV,

SAT•CBL•STRM, DVD•VCR,

DVR•AUX) put the remote

in the right mode to control

your device.

GUIDE•HOME and MENU

access the same features

as the keys on your original

remotes.

Arrow keys act as

navigation keys for

streaming media players as

well as in menu and guide

systems for other devices.

CLEAR exits remote

programming; it also

performs the same

functions as on your

original remotes.

CHAN and VOL keys act

as channel and volume

controllers.

The INPUT and — (dash)

key has three functions: (1)

it toggles through all the

video sources connected

to your TV; (2) when the

remote is in VCR mode, this

button toggles between

VCR and the TV input; (3)

when you’re entering digital

channel numbers directly,

this button lets you separate

the main channel number

from the sub-channel

number (such as 59.1).

Battery Saver

Your universal remote control saves battery power by

automatically turning off if any key is pressed for more

than 60 seconds. This saves your battery life should

your remote get stuck in a place where the keys remain

depressed, such as between sofa cushions.

Congratulations on your purchase of this 4-device RCA

Universal Remote Control. This remote features a library

of codes with the latest devices of all major brands, with

support for streaming media players as well. The navigation

keys have been redesigned to function seamlessly with the

more sophisticated menu and guide systems found in today’s

home entertainment devices.

RCRBB04GR

Universal Remote Control

Owner’s Manual

Manual del Propietario (parte posterior)

Actual model may vary from

illustration

Care and Maintenance

• Keep the remote dry. If it gets wet, wipe it dry

immediately.

• Use and store the remote only in normal temperature

environments.

• Handle the remote gently and carefully. Don’t drop it.

• Keep the remote away from dust and dirt.

• Wipe the remote with a damp cloth occasionally to keep it

looking new.

• Modifying or tampering with the remote’s internal devices

can cause malfunction and invalidate its warranty.

SAVE THIS MANUAL AND THE CODE LISTS!

Remote controls can sometimes lose their programming

when you change the batteries. Make sure you keep the

manual and code lists in a safe place so that you can

reprogram the remote if you need to.

Tip: This remote is already programmed to operate

most RCA-branded TVs, VCRs, DVD players and satellite

receivers. Just press the corresponding key—DVD•VCR

for a DVD player, TV for a television, SAT•CBL•STRM for a

satellite receiver, DVR•AUX for a DVR.

Your universal remote requires two AAA alkaline batteries

(not included).

To install the batteries:

1. Press and push the

battery compartment

cover to remove it.

2. Insert the batteries,

matching the batteries

to the (+) and (–) marks

inside the battery

compartment.

3. Push the battery cover

back into place.

Battery Precautions:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc) or

rechargeable (nickel-cadmium) batteries.

• Always remove old, weak or worn-out batteries promptly

and recycle or dispose of them in accordance with Local

and National Regulations.

To use this universal remote with your home entertainment

system, ﬁ rst you need to program it to control your devices.

There are four ways you can program the universal remote

to operate your devices. Try them in the order listed here:

• The Brand Code Search searches through the codes

for select brands of devices.

• The Direct Code Entry lets you enter a code from the

accompanying code list for your brand of device.

• The Auto Code Search goes automatically through all

the codes for the device you’re trying to control.

• The Manual Code Search lets you manually go

through all the codes for the device you’re trying to

control.

Auto Code Search

The Auto Code Search goes automatically through all the

codes for the device you’re trying to control. When you ﬁ nd

the one that operates your device, you can stop the search

and store that code.

TIPS: Each device key is associated with a type

of device—the TV is preset to search for TVs,

SAT•CBL•STRM for satellite receivers, cable boxes

or digital TV converters or streaming media players,

DVD•VCR for DVD players, and DVR•AUX for DVRs. To

program a device key for a different type of device, see

the Changing a Key’s Device Type section.

To exit wit h o u t s a v ing a new c o d e a t any point i n t h e

Auto Code Search, press the CLEAR key.

1. Manually turn on the device you

want to control.

2. Press and hold the device key you want to program.

While you’re holding down the device key, use your

other hand to press and hold the remote’s POWER key

at the same time.

3. Wait until the POWER key comes

on and stays on. Then release

both keys.

4. Keep the remote pointed

directly at the front panel

of the device you want to

control. Press PLAY on the

remote and wait 5 seconds.

The remote is testing a batch

of 10 codes on your device.

Testing the Code for Maximum Functionality

1. Try a variety of the device’s functions with the remote.

If some device features don’t work, go to the next step

to try a different code.

2. Repeat the Auto Code Search Method from the

beginning. When your device turns off, do not stop

searching. Instead, with the unit now off, continue to

press the PLAY key every 5 seconds until the unit turns

back on.

3. Once the unit turns back on, press the REVERSE key

on the remote every 2 seconds until your device turns

off again. When your device turns off again, press the

STOP key.

4. Test the key’s functionality again by attempting to

control a variety of the device’s functions. If the code

that has been stored controls the majority of the

device’s functions, programming is complete. If the

code stored does not give maximum functionality, try

another code.

Did your device turn off?

YES: Go to step 5.

NO: Press PLAY again. The remote tests the next batch

of 10 codes.

Keep pressing PLAY every 5 seconds until your device

turns off.

5. When your device turns off,

press the REVERSE key on

the remote and wait at least 2

seconds. The remote tries the

last of the previous ten codes.

Did your device turn on?

YES: Press the STOP

key. You’re done! You’ve

programmed this device key.

NO: Press REVERSE again. The remote tests the next

code in the batch.

Keep pressing REVERSE every 2 seconds until your

device turns back on. When it does, press STOP.

Note: If you accidentally press the REVERSE key after

your device turns on, press the FORWARD key. Then, wait

two seconds to see if your device turns off again.

NOTES

Throughout the programming of each key, be sure to

keep the remote pointed at the IR sensor of the device

you are currently programming the remote to control.

Test the re m o t e w i t h the devi c e t o m a ke sure th e

device key is programmed with the correct code for

maximum functionality. If some features don’t work, try

a different code. See the “Testing the Code for Maximum

Functionality” section below for more information.

During the Auto Code Search, the remote ignores

keypresses that aren’t part of the search.

The search times out after two minutes (the POWER key

blinks four times and turns off, and the last programmed

code under that device key is retained).

The POWER key blinks four times and turns off when the

remote has gone through all the codes. The remote exits

the Auto Code Search. If your device hasn’t turned off

yet, try a different search method.

Testing the Code for Maximum Functionality

1. Try a variety of the device’s functions with the remote.

If some device features don’t work, go to the next step

to try a different code.

2. Repeat the Brand Code Search from the beginning.

When the device turns off for the ﬁ rst time, don’t

press the STOP key, which would store the same code.

Instead, with the unit now off, continue to press the

POWER key repeatedly until the unit turns back on.

3. Once the unit turns back on, you have found another

code that operates the device. Press the STOP key.

4. Test the key’s functionality again by attempting to

control a variety of the device’s functions. If the code

that has been stored controls the majority of the

device’s functions, programming is complete. If the

code stored does not give maximum functionality, try

another code.

Brand Code Search

The Brand Code Search goes through only the codes for one

of the select brands listed in the accompanying code list. If

your brand of device is listed, this search can be very quick

and easy.

TIPS: Each device key is associated with a type

of device—the TV is preset to search for TVs,

SAT•CBL•STRM for satellite receivers, cable boxes

or digital TV converters or streaming media players,

DVD•VCR for DVD players, and DVR•AUX for DVRs. To

program a device key for a different type of device, see

the Changing a Key’s Device Type section.

To exit wit h o u t s a v ing a new c o d e a t any point i n t h e

Brand Code Search, press the CLEAR key.

1. Manually turn on the device you

want to control.

3. Press and hold the device key you want to program.

While you’re holding down the device key, use your

other hand to press and hold the remote’s POWER key

at the same time.

4. Wait until the POWER key comes

on and stays on. Then release

both keys.

6. Keep the remote pointed directly

at the front panel of the device you

want to control. Press POWER on

the remote and wait 2 seconds. The

remote is testing a single code for

your device’s brand.

Did your device turn off?

YES: Press the STOP key to store the code. You’re

done! You’ve programmed this device key.

NO: Press POWER again. The remote tests the next

code for your brand.

Keep pressing POWER every 2 seconds until your

device turns off. When it does, press STOP.

2. Find your device’s brand in the

Brand Code list section of the

accompanying code list. Circle

the number for your brand and

keep the list handy.

Code Lists

Brand Codes are used for programming using the Brand Code Search

and Entry method outlined in the User’s Guide.

Lista de Códigos

Los códigos de las marcas son utilizados para programar utilizando

los métodos de búsqueda y entrada de códigos de marcas, resaltado

en la guía del usuario.

0123456789

RCA

PROSCAN

Insignia

JVC

Magnavox

Philips

Panasonic Samsung Sharp Sony Toshiba Vizio

VCR

0123456789

RCA

PROSCAN

Apex JVC

Magnavox

Philips

Panasonic Pioneer Samsung Sharp Sony Toshiba

DVD

SAT/CABLE

0123456789

RCA

PROSCAN

Motorola DirecTV

Dish Network

Systems/

Echostar

General

Instruments

Hughes

Network

Systems

Scientific

Atlanta

Magnavox

Philips

AMNIO

ADB

Panasonic

Brand Code List/Lista de Códigos de Marcas

0123456789

Samsung

Magnavox

Philips

Mitsubishi Panasonic Sharp Sony Toshiba

RCA

PROSCAN

JVC

Symphonic

Admiral .................................

Advent ...........................................

Aiko .........................................................

Akai .............................10812, 11675, 10060,

Albatron

....................................................................

America Action ..........................................................

Anam

........................................................................

AOC ........................................................................

Apex Digital

........................................10156, 107

Audiovox ...............................10451, 10180, 10

.............................................................10875, 1

Aventura .........................................................

Axion

.............................................................

Bell & Howell ..............................................

BenQ .........................................................

Bradford

..................................................

Broksonic ...............................................

Candle ..................................................

Carnivale ............................................

Carver

...............................................

Celera .............................................

Changhong ...................................

Citizen .........................................

Clarion

.......................................

Commercial Solutions ............

Concerto ...............................

Contec .................................

Craig ...................................

Crosley .............................

Crown ............................

Curtis Mathes ..............

....................................

...................................

CXC ..........................

Cytron ...................

Daewoo ..............

Dell ....................

Denon ..............

Diamond Visio

Dumont ........

Durabrand .

Dwin

.........

Dynex .....

Electrogr

Electroh

Emerso

.........

Empr

Env

ESA

5. Look at the number you circled for

your device’s brand code number.

Press that number on the remote

keypad.

NOTES

Throughout the programming of each key, be sure to

keep the remote pointed at the IR sensor of the device

you are currently programming the remote to control.

Test the re m o t e w i t h the devi c e t o m a ke sure th e

device key is programmed with the correct code for

maximum functionality. If some features don’t work, try

a different code. See the “Testing the Code for Maximum

Functionality” section below for more information.

During the Brand Code Search, the remote ignores

keypresses that aren’t part of the search.

The search times out after two minutes (the POWER key

blinks four times and turns off, and the last programmed

code under that device key is retained).

The POWER key blinks four times and turns off when the

remote has gone through all the codes. The remote exits

the Brand Code Search. If your device hasn’t turned off

yet, try a different search method.

Direct Code Entry

Direct Code Entry lets you enter a code from the

accompanying code list for your brand of device. It’s not as

easy as the other methods, but it’s potentially the fastest

method.

TIP: Each device key is associated with a type

of device—the TV is preset to search for TVs,

SAT•CBL•STRM for satellite receivers, cable boxes

or digital TV converters or streaming media players,

DVD•VCR for DVD players, and DVR•AUX for DVRs. To

program a device key for a different type of device, see

the Changing a Key’s Device Type section.

1. Manually turn on the device

you want to control.

3. Press and hold the device key you want to program

(the POWER key comes on).

While you’re holding down the device key, use your

other hand enter the ﬁ rst ﬁ ve-digit code for your brand

in the code list (the POWER key goes off after the ﬁ rst

digit).

2. Find the Code List that came with

the remote. Locate the section for

the type of device you’re trying to

program, and ﬁ nd your brand in

that section. Circle the codes for

your brand and keep them handy.

Code Lists

Brand Codes are used for programming using the Brand Code Search

and Entry method outlined in the User’s Guide.

Lista de Códigos

Los códigos de las marcas son utilizados para programar utilizando

los métodos de

búsqueda y entrada de códigos de marcas, resaltado

en la guía del usuario.

0123456789

RCA

PROSCAN

Insignia

JVC

Magnavox

Philips

Panasonic Samsung Sharp Sony Tos

hiba Vizio

VCR

0123456789

PROSCAN

Apex JVC

Magnavox

Philips

Panas

onic Pioneer Samsung Sharp Sony Toshi

DVD

SAT/CABLE

0123456789

RCA

PROSCAN

Motorola DirecTV

Dish Network

stem

Echostar

General

Instru

ments

Hughes

Network

Sys

tems

Scientific

Atlanta

Magnavox

Philips

MNIO

ADB

Panasonic

Brand Code List/Lista de Códigos de Marcas

0123456789

Samsung

Magnavox

Philips

bishi Panasonic Sharp Sony Toshiba

RCA

PROS

CAN

JVC

mphonic

Admiral .................................

Advent .

..........................................

Aiko .....................................................

...

Akai .............................10812, 11675, 10060,

Albatron

....................................................................

America Action ..........................................................

Anam

..........................................

..............................

AOC ..................................

......................................

Apex Digital

.......

.................................10156, 107

Audiovox ...............................10451, 10180, 100

.............................................................10875, 1

Aventura .........................................................

Axion

.............................................................

Bell & Howell ...........................................

...

BenQ ..................................

.....................

Bradford

...........................

.......................

Broksonic ...............................................

Candle .............................................

.....

Carnivale ...................

.........................

Carver

.....................

.........................

Celera .............................................

Changhong ...................................

Citizen .........................................

Clarion

.......................................

Commercial Solutions ............

Concerto ...............................

Contec ..................................

Craig ..............

....................

Crosley ..

...........................

Crown ............................

Curtis Mathes ..............

....................................

...................................

CXC ..........................

Cytron ...................

Daewoo ..............

Dell ....................

Denon ..............

Diamond Visio

Dumont ........

Durabrand .

Dwin

.........

Dynex ......

Electrogr

Electroh

Emerso

.........

Empr

Env

ESA

NOTES

Remember to enter the code for future reference in the

box provided in the Code Retrieval section of this manual.

If your brand isn’t listed in the code list, use one of the

Code Search methods to program the remote control.

(Refer to the Auto and Manual Code Search methods.)

If you release the device key any time during the Direct

Code Entry procedure, the POWER key blinks four times,

and the process is exited. The last programmed code

under the device key is retained.

Test the re m o t e w i t h the devi c e t o m a ke sure th e d e v i c e

key is programmed with the correct code for maximum

functionality. If some features don’t work, try a different

code in the list.

Manual Code Search

The Manual Code Search lets you go one-by-one through

all the codes for the device you’re trying to control. When

you ﬁ nd the one that operates your device, you can stop the

search and store that code.

TIPS: The Manual Code Search method may take a long

time because the remote searches through all of the

codes in its memory one-by-one. If your brand is listed

in the Brand Codes or the Code Lists, ﬁ rst try the Brand

Code Search or the Direct Code Entry method.

Each device key is associated with a type of device—the

TV is preset to search for TVs, SAT•CBL•STRM for

satellite receivers, cable boxes or digital TV converters

or streaming media players, DVD•VCR for DVD players,

and DVR•AUX for DVRs. To program a device key for

a different type of device, see the Changing a Key’s

Device Type section.

To exit wit h o u t s a v ing a new c o d e a t any point i n t h e

Manual Code Search, press the CLEAR key.

1. Manually turn on the device

you want to control.

2. Press and hold the device key you want to program.

While you’re holding down the device key, use your

other hand to press and hold the remote’s POWER key

at the same time.

3. Wait until the POWER key comes

on and stays on. Then release

both keys.

4. Keep the remote pointed directly at the front panel of the

device you want to control. Press POWER on the remote

and wait 2 seconds. The remote is testing a single code

for your device.

Did your device turn off?

YES: Press the STOP key to store

the code. You’re done! You’ve

programmed this device key.

NO: Press POWER again. The

remote tests the next code for

your device.

Keep pressing POWER every 2

seconds until your device turns off.

When it does, press STOP.

TIP: Because there are so many codes, you may have to

press the POWER key many times—possibly hundreds of

times.

NOTES

Throughout the programming of each key, keep the

remote pointed at the IR sensor of the device you are

programming the remote to control.

Test the re m o t e w i t h the devi c e t o m a ke sure th e

device key is programmed with the correct code for

maximum functionality. If some features don’t work, try

a different code. See the “Testing the Code for Maximum

Functionality” section below for more information.

During the Manual Code Search, the remote ignores

keypresses that aren’t part of the search.

The search times out after two minutes (the POWER key

blinks four times and turns off, and the last programmed

code under that device key is retained).

The POWER key blinks four times and turns off when the

remote has gone through all the codes. The remote exits

the Brand Code Search. If your device hasn’t turned off

yet, try a different search method.

Testing the Code for Maximum Functionality

1. Try a variety of the device’s functions with the remote.

If some features of your devices don’t work, go to the

next step to try a different code.

2. Repeat the Manual Code Search and Entry Method

from the beginning. When the device turns off for the

ﬁ rst time, don’t press the STOP key, which would store

the same code. Instead, with the unit now off, continue

to press the POWER key repeatedly until the unit turns

back on.

3. Once the unit turns back on, you have found another

code that operates the device. Press the STOP key.

4. Test the key’s functionality again by trying a variety

of functions. If the code controls the majority of the

device’s functions, programming is complete. If the

code stored does not give maximum functionality, try

another code.

Changing A Key’s Device Type

Each device key is associated with a type of device—the

TV is preset to search for TVs, SAT•CBL•STRM for satellite

receivers, digital TV converters or streaming media players,

or cable boxes, DVD•VCR for DVD players or VCRs, and

DVR•AUX for DVRs. To program these keys to control a

different kind of device, you have to reassign them ﬁ rst.

Reassigning the DVD•VCR Key to Control a VCR

The DVD•VCR key defaults to control a DVD player. If you

want the DVD•VCR key to control a VCR, you must reassign

it.

1. Press and hold the DVD•VCR key. The POWER key

turns on. Keep holding down the DVD•VCR key.

2. While holding down the DVD•VCR key, press and

release the number 2 key on the keypad. The POWER

key turns off.

3. Release the DVD•VCR key. The POWER key blinks four

times and then turns off. The DVD•VCR key is now set to

control a VCR.

4. Follow the directions in the auto, brand, direct entry, or

manual code search to program the DVD•VCR key for

your VCR.

Reassigning the DVR•AUX Key To Control Other

Devices

The DVR•AUX key defaults to control a DVR. If you want the

DVR•AUX key to control a different device (an additional

TV, DVD, satellite, digital TV converters or streaming media

players, or cable box, for example), you must reassign it.

1. Press and hold the DVR•AUX key. The POWER key

turns on.

2. While holding down the DVR•AUX key, press and release

the number key on the keypad for the device you wish to

control (see the chart below). The POWER key turns off.

DVR•AUX KEY CONTROLS:

Additional TV press 1

VCR or DVR press 2

Additional DVD press 3

Additional satellite, digital TV

converters or streaming media

players, or cable box

press 5

3. Release the DVR•AUX key. The POWER key blinks four

times and then turns off. The DVR•AUX key is now set

to control the device type you selected.

4. Follow the directions in the auto, brand, direct entry, or

manual code search to program the DVR•AUX key.

Code Retrieval

Once you’ve programmed the remote to control your

devices, you may want to record the codes for future

reference. If you used the Direct Code Entry method, this

is easy. Just ﬁ nd the codes you entered and make a note

of them in the boxes below. If you used one of the Code

Search methods to program your remote or if you used the

Direct Entry method but don’t remember the code, you will

need to retrieve each device’s ﬁ ve-digit code. Retrieving

the actual code and writing it down will save you time

if you ever need to program the remote again (e.g., if

programming is lost when you change the batteries). If the

codes are recorded, you can use the Direct Entry method

to reprogram your remote to control your devices, which is

quick and easy.

1. Press and hold the device

key (TV, SAT•CBL•STRM,

DVD•VCR, DVR•AUX) whose

code you wish to retrieve.

The POWER key turns on.

Keep pressing the device key.

2. While holding the device key down, press and hold

the INFO key. The POWER key turns off. After holding

down both keys for three seconds, the POWER key

turns back on.

3. Release both keys. The POWER key remains on.

4. Starting with the number 1 key, press and release each

number key on the keypad in the following order: 1-9,

then 0. The number that causes the POWER key to

blink is the ﬁ rst number of the code. As you ﬁ nd each

number of the code, write it down for future reference.

Note: All TV codes begin with the number 1; all VCR

and DVR codes begin with the number 2; all DVDs, the

number 3; and all satellite receivers, digital TV converters

or streaming media players, and cable boxes, the number

5. Repeat step 4 until you have retrieved all ﬁ ve numbers

in the code. After the fourth number is retrieved, the

POWER key blinks brieﬂ y, then turns off.

TIP: To exit the Code Retrieval Mode at any time, press

the CLEAR key.

Note: If you press an invalid key during the Code

Retrieval process, the remote will not respond. If you do

not press a valid Code Retrieval key (TV, SAT•CBL•STRM,

DVD•VCR, DVR•AUX, INFO, CLEAR), Code Retrieval times

out after 15 seconds. The POWER key blinks four times,

and then turns off.

IMPORTANT

Because this remote controls more than one device,

you must ﬁ rst “tell” the remote which device you wish

to operate. That means, if you wish to operate your TV,

you must ﬁ rst press the TV key to put the remote in the

TV Mode. The remote stays in that device mode until

you press a different device key. For example, if your

remote is in TV Mode and you want to operate the DVD

player, you must press the DVD key to change device

modes.

Problem: The remote does not operate your device.

• Make sure the remote is in the correct mode by pressing the

corresponding device key (TV, SAT•CBL•STRM, DVD•VCR,

DVR•AUX). This tells the remote which device to operate.

• Remove any obstacles between the remote and the device.

Make sure you’re aiming the remote at the device’s IR

sensor.

• Make sure the batteries are fresh and are properly installed.

Replace the batteries with two new AAA batteries, if

necessary (see the Battery Installation section).

Problem: The remote can’t be programmed to operate

your device.

• If you are testing the remote while programming it, you may

be too far away from the device or at a wrong angle. There

must be an unobstructed path between the remote and the IR

sensor on the device. Move closer and make sure you point the

remote at the device you’re trying to control.

• If you’re using the Direct Entry programming method

to enter the codes for your brand and the unit is still not

functioning properly, try the auto, brand, or manual search

method.

• To control combo units, like TV/VCRs or TV/DVDs, you must

program the individual corresponding device keys to control

each part of the combo unit. Once programmed successfully,

the TV key controls the TV functions, and the DVD•VCR key

controls the VCR or DVD functions.

• Make sure the batteries are fresh and are properly installed.

Problem: The remote doesn’t perform commands properly.

• Make sure the remote is in the correct mode by pressing the

corresponding device key (TV, SAT•CBL•STRM, DVD•VCR,

DVR•AUX). This tells the remote which device to operate.

• Make sure device is ready (for example, the DVD player has

a disc loaded).

• You may have pressed an invalid key for the mode the remote is

in.

• If you’re trying to enter a channel number directly, try

pressing the OK key after entering the channel number as

this is a requirement of certain models and brands.

• There is a possibility that a programmed code may only be

able to control some of your device features (for example,

only turns a device on and off). To conﬁ rm that the device

key is programmed with the correct code for maximum

functionality, test the device. Attempt to control a variety

of the device’s functions with the remote. If some of the

features of your devices don’t work, try programming the

remote with a different code in the list using the Direct Code

Entry Method, until you ﬁ nd the code that allows the remote

to control the majority of your device’s functions. Different

codes can provide different levels of functionality.

Problem: The POWER key does not light when you press a

key.

• You may have pressed an invalid key for the mode the

remote is in.

• Make sure the remote is in the correct mode by pressing the

corresponding device key (TV, SAT•CBL•STRM, DVD•VCR,

DVR•AUX). This tells the remote which device to operate.

• Make sure the batteries are fresh and are properly installed.

Replace the batteries with two new AAA batteries, if

necessary (see the Battery Installation section).

Problem: The remote will not change channels on device.

• Make sure the remote is in the correct mode by pressing the

corresponding device key (TV, SAT•CBL•STRM, DVD•VCR,

DVR•AUX). This tells the remote which device to operate.

• Press the OK key after you enter a channel number.

• Remove any obstacles between the remote and the device.

Make sure to aim the remote at the IR sensor on the device.

Problem: The device’s menu does not appear on the TV

screen.

• Make sure you have connected the device to your TV properly

and selected the correct input. (See your devices’ Owner’s

Manuals for proper connection procedures.)

• Make sure the remote is in the correct mode by pressing the

corresponding device key (TV, SAT•CBL•STRM, DVD•VCR,

DVR•AUX). This tells the remote which device to operate.

• Menu access isn’t supported for all brands. You may need to

use your original remote control to access menu functions

for some devices.

For more information, please visit

www.RCAAudioVideo.com

Consumer Help Line: 1-800-420-7968

VOXX Accessories Corporation (the “Company”) warrants to you the

original retail purchaser of this product that should it, under normal use

and conditions, be proven defective in material or workmanship during

its lifetime while you own it, such defect(s) will be repaired or replaced

(at the Company’s option) without charge for parts and repair labor.

To obtain repair or replacement within the terms of this Warranty, the

product is to be delivered with proof of warranty coverage (e.g. dated bill

of sale), speciﬁ cation of defect(s), transportation prepaid, to the Company

at the address shown below.

This Warranty does not cover product purchased, serviced or used

outside the United States or Canada. This Warranty is not transferable

and does not extend to costs incurred for installation, removal or

reinstallation of the product. This Warranty does not apply if in the

Company’s opinion, the product has been damaged through alteration,

improper installation, mishandling, misuse, neglect, accident, or the

simultaneous use of different battery types (e.g. alkaline, standard or

rechargeable).

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY

IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE

AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE

PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or liabilities. ANY

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL

BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL

THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES WHATSOEVER. No person or representative is authorized

to assume for the Company any liability other than expressed herein in

connection with the sale of this product.

Some states/provinces do not allow limitations on how long an implied

warranty lasts or the exclusion or limitation of incidental or consequential

damage so the above limitations or exclusions may not apply to you.

This Warranty gives you speciﬁ c legal rights and you may also have

other rights, which vary from state/province to state/province.

U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New

Yor k 1 178 8

CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road,

Unit 3, Door 16, Mississauga, Ontario L5T 3A5

Trademark(s) ® Registered

RCRBB04GR US 03

Step 1: Install your batteries

Step 2: Program your remote

Tour of the Remote Advanced Functions

Troubleshooting

Limited Lifetime Warranty

DVD•VCR CODE DVR•AUX CODE

SAT•CBL•STRM CODE

TV CODE

SAT CABLE DTV CONVERTER

DVD VCR DVR/VCR DVD TV SAT•CBL•STRM

3502 Woodview Trace, Suite 220

Indianapolis, IN 46268

Backlighting

Backlight illumination helps you see the remote control

keys better in the dark.You can turn backlight illumination

on or off by pressing the backlight key ( ). Backlighting

stays on as long as keys are being pressed and turns off six

seconds after the last keypress. Once the backlight time has

timed out, any keypress will reactivate it. If the backlight

illumination is on, and you press the backlight key, the

backlight turns off.

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any Changes or modiﬁ cations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate this equipment.

Industry Canada Regulatory Information

This class B digital apparatus complies with Canadian ICES-003

Avis d’Industrie Canada

Cet appareil numérique de la classe B est conforme a la nome NMB-

003du Canada