User Manual

Reset Phone Settings
This feature allows you to reset the menu to the original default settings.
1.Press the “ Menu ” softkey while in idle mode.
2. Using the directional pad, move the indicator to “ Reset Phone Settings.” Press the “ Select ” softkey.
3. Move the indicator to “ Yes ” and press the “ Select ” softkey. Confirm the action once more and the phone
will reboot with the default settings.
For servicing or replacement, you can purchase a suitable headset through service centre or retailer shop.
Pour l'entretien ou le remplacement, vous pouvez acheter un écouteur approprié par le centre commercial
ou le magasin de détaillant.
14
Restoring the Default Settings
This feature will reset the phone settings back to the original factory defaults
NOTE: This will erase records in call history and phone book, all greetings,and all messages in the memories.
1. Press the “ Menu ” softkey while in idle mode.
2. Using the directional pad, move the indicator to “ Factory Reset .” Press the “ Select ” softkey.
3. Move the indicator to “ Yes ” and press the “ Select ” softkey. Confirm the action once more and the phone
will reboot with the default settings.
Basic Operation
Your phone provides the convenience of four separate telephone lines, each with its own phone number. It
can have up to ten telephones or cordless handsets sharing multiple lines. Each station is connected to all
others via intercom.
Making Calls with the Handset
1. Pick up the handset and the phone automatically selects the priority line. If the priority line is in use, it will
select the next open line or you may select a line by pressing the corresponding line key.
2. Wait for the dial tone, then dial a phone number.
3. Hang up the handset when finished.
Making Calls with the Speakerphone
1. Press the Speakerphone button and the phone automatically selects the priority line. If the priority line is
in use, it will select the next open line or you may select a line by pressing the corresponding line key.
2. Wait for the dial tone, then dial a phone number.
3. Press the Speakerphone button when finished.
Making Calls with the Optional Headset
1. Connect the headset plug into the headset jack on the right side of the base.
2. Adjust the headset so the microphone is approximately 2 to 3 inches away from your mouth.
3. Press the Headset button and the phone automatically select
s the priority line. If the priority line is in use,
it will select the next open line or you may select a line by pressing the corresponding line key.
4. Wait for the dial tone, then dial a phone number.
5. Press the Headset button when finished.
NOTE: The Unison system will work with most tele
com headsets that have a 2.5mm headset jack.
Pre-dialing
1. With the phone idle and the handset in the cradle, manually enter the telephone number. The number will
show in the display.