Operation Manual
14
tekstOSD (On Screen Display) basic adjustment
PC adjust
You can make the desired adjustment in the PC mode.
Press the ‘MENU’ button (15) to enter the OSD menu. Then press button
to select the ‘PC ADJUST’ menu. Press
OK
EXIT
MENU
button to conrm the selection.
Press the button to select the preferred adjustment. Press
OK
EXIT
MENU
button to
conrm the selection.
Select the type you want to change. Press the buttons to adjust.
You can adjust the auto adjust, horizontal position, vertical position, clock phase
and sampling clock.
Press the ‘MENU’ button (15) to return to upper-menu.
NOTE:
Only available when inputting PC signal.