User Manual RCA R43F6FHD-EU
Index Introduction Installation ..........................................................3 Safety .................................................................. 3 Warning/Caution .................................................... 4 Main unit description............................................. 7 Remote Control ..................................................... 8 OSD (On Screen Display) basic adjustment.. Connect .......................................................... Select language........
Introduction Thank you very much for purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very beginning, read this manual carefully and keep it handy for future reference. INSTALLATION 1. Locate the TV in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. 2.
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel.
Caution - - Caution High voltages are used in the operation of this product. Do not open the product’s casing. Refer servicing to qualified service personnel. - Caution To prevent fire or electrical shock hazard, do not expose the main unit to moisture. Do not place objects filled with liquids, such as vases, on the TV. Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
Caution Caution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall. Caution When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Main unit tekst description Control Panel Button Function VOL+ : VOL- : CH+: CH- : MENU : SOURCE : POWER : Volume up. Volume down TV channel up. TV channel down. Press to select the main menu. Select the input signal. Switch on when in standby mode or to enter the standby mode. TV Connections 1. 2. 3. 4. 5. RJ45 VGA PC audio Scart LNB antenna 6. 7. 8. 9. 10. HDMI-1 HDMI-2 HDMI-3 COAXIALE Mini YPBPR 11. 12. 13. 14. 15.
Remote tekst Control 1 Indicator light. The red indicator light flashes red to show that the remote is working and sending a signal. ASPECT 1 2 3 4 5 6 7 8 LIST 0 9 REPEAT S CH VOL GUIDE INPUT OK DVD SETUP BACK PROG EXIT STEP GOTO A-B INDEX HOLD REVEAL SIZE MENU ANGLE FAV TV.RD MIX S.PAGE TITLE SLOW ZOOM CANCEL TEXT 3 Watch the screen in various formats: Auto/4:3/16:9/Zoom/ Subtitels/Smart-zoom. 4 Mute and restore your TV sound. 5 0-9 numbers.
Remote tekst Control 19 • Exit the OSD menu. • Display and exit the DVD setup menu (DVD mode). ASPECT 1 2 3 4 5 6 7 8 LIST 0 9 REPEAT S CH VOL 21 • To select the page number of the index in teletext (TV Teletex mode). • Stop the playback or recording (USB/DTV/DVD mode). AUDIO GUIDE MENU INPUT OK DVD SETUP BACK PROG EXIT STEP GOTO A-B INDEX HOLD REVEAL SIZE MENU ANGLE FAV TV.RD MIX S.PAGE TITLE SLOW ZOOM CANCEL TEXT 20 • Access the Teletext items (ATV/DTV mode).
OSD (On Screen Display) tekst basic adjustment Connect Connect an RF cable from the TV’s input called “RF-In” and to your TV Aerial socket Press OK EXIT button toMENU select ‘Start the setup’. Select language Press buttons to select the language. EXIT Press OK button toMENU confirm the preferred language.
OSD (On Screen Display) tekst basic adjustment Time zone Press to go to the next setting ‘Time zone’. Press buttons to select the preferred time zone. EXIT Press OK button toMENU confirm the preferred time zone. Wired/Wireless network Press to go to the next setting ‘Network’. If you didn’t connect with a wire the TV automatic select the possibility ‘Use a wireless network’. EXIT Press OK button toMENU confirm to use a wireless network.
OSD (On Screen Display) basic adjustment TV viewing guide Press to go to the next setting ‘TV viewing guide’. Press buttons to select the way you want to watch TV or the source. EXIT Press OK button toMENU confirm the selection. Source You can select the source you need. Press the ‘MENU’ button (15) to enter the OSD menu. Then press button to select the ‘SOURCE’ menu and press the button to select the preferred source.
OSD (On Screen Display) basic adjustment Picture You can select the type of picture, which best corresponds to your viewing. Press the ‘MENU’ button (15) to enter the OSD menu. Then press button EXIT to select the ‘PICTURE’ menu. Press OK button toMENU confirm the selection. Select the type you want to change. Press the buttons to adjust. You can adjust the picture mode, contrast, brightness, color, backlight, noise reduction, color temperature and more.
OSD (On Screen Display) tekst basic adjustment PC adjust You can make the desired adjustment in the PC mode. Press the ‘MENU’ button (15) to enter the OSD menu. Then press button EXIT to select the ‘PC ADJUST’ menu. Press OK button toMENU confirm the selection. EXIT Press the button to select the preferred adjustment. Press OK button toMENU confirm the selection. Select the type you want to change. Press the buttons to adjust.
OSD (On Screen Display) tekst basic adjustment Channel You can make the desired adjustment in the TV mode. Press the ‘MENU’ button (15) to enter the OSD menu. Then press button EXIT to select the ‘CHANNEL’ menu. Press OK button toMENU confirm the selection. Press EXIT the button to select the preferred adjustment. Press OK button toMENU confirm the selection. First you select the type of antenna you use. By auto scan the tv search for TV programs automaticaly.
OSD (On Screen Display) tekst basic adjustment System lock Press the ‘MENU’ button (15) to enter the OSD menu. Then press button EXIT to select the ‘SYSTEM LOCK’ menu. Press OK button toMENU confirm the selection. The default password is 0000 NOTE: The administrator password is 8899. Press the button to select the preferred adjustment. Press confirm the selection. You can change password and set your new password. You can put on or off the system lock, key lock and hotel mode.
OSD (On Screen Display) tekst basic adjustment Common Press the ‘MENU’ button (15) to enter the OSD menu. Then press button EXIT to select the ‘COMMON’ menu. Press OK button toMENU confirm the selection. Press the button to select the preferred adjustment. Press confirm the selection. Press the buttons to adjust. OK EXIT button toMENU You can adjust the OSD timer, sleep timer, auto standby timer, blue screen, HDMI CEC and menu reset. Press the ‘MENU’ button (15) to return to upper-menu.
Smart tekstTV Smart TV SMART TV brings you the latest in android technology. In television, press the HOME button, according to the prompt to enter the SMART TV channel. Smart TV mode if the remote controller can not realize the function, use the wireless mouse and related operations. Apps/Like Apps Press the button to select Application/Like Apps and Add App. Browser You may want to browse the Web through a browser! Exit: Return to the interface or previous page.
Settings tekst Settings Select setting icon, then you can do some settings. Network settings Press the button to select ‘Net mode’ and press button to select EXIT wired or wireless. Press OK button toMENU confirm the selection. Time settings Press the button to select ‘Auto Attach’ and press button to select on or off to get the current time automatically. Press the button to select ‘Time zone’ to select the local time zone.
Settings tekst Language Setting Here you can adjust ‘Language Setting’ to select current display language, the ‘Input Mode’ and ‘Permission Manage’. System Recovery To put your TV back to original state you select ‘System Recovery’. ‘Account Manage’ shows you the TV information.
USBtekst Features USB Features Press the “HOME” button to enter and press ‘Multi Media’ menu. , button to select the Video EXIT Press button to select the ‘Video’ option. Press OK button toMENU confirm the selection. Press the button to select the disk drive or the file you want to watch. Press EXIT OK button toMENU confirm the selection. Press the ‘EXIT’ button to select return option to go back to the previous menu. This is the same for Music, Photo and Folder.
Specifications RGB-input Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (KHz) VGA 640 x 480 31.5 60 DOS SVGA XGA WXGA 720 x 400 31.5 800 x 600 37.9 1.024 x 768 48.4 70 60 60 1.920 x 1.080 67.5 60 Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (KHz) 480i 720 x 480i 15.73 59.94/60 31.47 59.94/60 HDMI-input VGA 576i 640 x 480 31.47 59.94 720 x 576i 15.63 576p 720 x 576p 720p 1.280 x 720p 1.080i 1.920 x 1.080i 1.080p 1.920 x 1.080p 31.
Troubleshooting tekst Problem Solution No picture, no sound • Check the cable between TV and antenna/external AV device. • Press the power button on the remote. • Press the SOURCE button the remote, then press the button repeatedly to select the TV source. TV will not turn on Poor picture, sound OK Audio noise No audio Photos, videos and music from a USB device are not displayed • Make sure the power cord is plugged in. • The batteries in the remote control may be drained; replace the batteries.
Troubleshooting tekst USB files are played jerkily • The speed of the USB storage device can affect the speed of data transfer to the TV, preventing image and / or sound from being smoothly displayed. The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to produce. However, there may be a small number of bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Useful Information tekst and Licences Guarantee We regret it when a RCA product doesn’t work as it should, despite our careful quality control. That is why we offer a 2-year manufacturer’s warranty after the date of purchase on all our models. This guarantee is a pick-up and return guarantee. This means that we take care of the return of the product to our repair and service center. We will thoroughly check the product and solve the problem. We will send the product back to your home within 7 working days.
Useful Information tekst and Licences EC directives internet address: https://eur-lex.europa.eu/browse/summaries.html?locale=en The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
tekst 27
About RCA For over 90 years, the RCA brand has been there for countless moments in family rooms across America. Through it all, families have come to expect exceptional performance, quality, innovation and value from RCA. Today, the RCA brand symbolizes American ingenuity worldwide. Its iconic name can be found on flat-panel and 4K televisions, tablets, smartphones, home appliances, and many other extraordinary products.
