Manual

Starting ChannelGuide
with masterremote control
To start channel guide, press the CHAN(channel) GUIDEbutton
on the master remote control.
• The screen will display all the channels that are
programmed into the channel memory scan list, 12 at a
time.
• To see the next 12 channels, press the + button.
• To see the previous 12 channels, press the -button.
• Each little screen will display a stop-action picture that will
be continuously updated.
• While the 12 channels are on the screen, you can use the
ZOOMbutton to enlarge the picture and then use the arrow
buttons to pan around the screen. To return to normal size,
press and hold OUT.
Note: When using the ZOOMfeature, you will see a mosaic effect as
the picture is made larger.
Notes: Some channels were programmed into the channel memory
scan list at the factory. These are the channels that will appear during
channel guide unless you AutoProgram the channel memory or add and
erase channels as described on pages 46-47.
If the Channels: normal/priority function is set to priority, only the
channels in the priority channel scan list will appear. See page 42for
de/ails.
StartingChannelGuide
with menus
Press the MENUbutton to display the MAINMENU.Then press
the + or - button to highlight the Channel Guide function.
Press MENUagain to start displaying the channels on the
screen.
1 PressMENU to display
the MAIN MENU.
2 Repeatedlypressthe
- buttonto highlight
ChannelGuide.
3 PressMENU againto
startChannel Guide.
• The screen will display all the channels that are
programmed into channel memory scan list, 12 at a time.
• To see the next 12 channels, press the + button.
• To see the previous 12 channels, press the - button.
• Each little screen will display a stop-action picture that will
be continuously updated.
• While the 12 channels are on the screen, you can use the
ZOOMbutton on the master remote control to enlarge the
picture and then use the arrow buttons to pan around the
screen. To return to normal size, press and hold OUTon the
master remote cbntrol.
Note: When using the ZOOMfeature, you will see a mosaic pattern as
the picture is made larger.
StoppingChannelGuide
• To select one of the channels being displayed in the channel
guide, press the CHANNELup or down button to highlight the
channel number (white box with black numbers), and then
press the MENUbutton. This will stop channel guide and
take you directly to the channel you selected.
• Another way to stop channel guide is to press the CHAN
(channel) GUIDEbutton again.
Notes: Some channels were programmed into the channel memory scan
list at the factory. These are the channels that will appear during channel
guide unless you AutoProgram the channel memory or add and erase
channels as described on pages 46-47.
If the Channels: normal/priority function is set to priority, only the
channels in the priority channel scan list will appear. See page 42for
details'.
StoppingChannelGuide
To select one of the channels being displayed in the channel
guide, press the CHANNELup or down button to highlight the
channel number (white box with black numbers), and then
press the MENUbutton. This will stop channel guide and take
you directly to the channel you selected.
__!/