Models PS35182 and PS35682 Features 2 Features First-Time 3 3 3 4 5 5 6 6 7 Operation Unpack TV and Accessories Connect an Antenna or Cable-TV System Install the Batteries in Remote Controls Turn on TV PICTURE TILT POLARITY and STRENGTH Switches Detailed 8-11 12 13 14-15 16 17 18-21 22-36 37 38-39 40 Monitor 58-59 60 61 62-63 64 65 Auto-Help Displays AutoProgram TV's Channel Memory Scan List Add or Erase Channels to Channel Memory Set the Clock Operating Instructions Remote Control (TV Functions)
AUDIO SETUPMENUS The individual setup menus allow you to adjust individual features for the audio mode you have selected.
Model PS35182 Model PS35682 PROSCAN° So advanced. We're building simple. our reputation on products If you want all the benefits complexity, State-of-the-art technology that real people ProScan. to your complete TM that are so advanced, of the latest technology, we have a very simple solution. Thank you for choosing commitment Yet so simple. It's called ProScan. can use. And welcome satisfaction they're without the to our company-wide and viewing enjoyment.
PiP ON Menu This menu appears if PIP is on. PIP OFFMenu This menu appears if PIP is off. Press the MENUbutton to display the MAtN MENUon the TV screen. Press the + or - button to highlight the desired function, then press the MENUbutton to enter or adjust that function. When one of the menus shown at the right appears, repeatedly press the + or - button to highlight the desired function, and then press the MENUbutton to enter or adjust that function or display the next menu.
Mail YourRegistrationCardToday If you suspect that liquid has entered the TV, unplug it immediately and have it inspected by an Authorized TV Servicenter. Turning it off is not enough - your TV has _wer applied off. to some circuits A Product Registration Card is packed with your set. Please fill out the card and return it immediately.
YourProScan television ismorethanstate-of-the-art technology. It's technology tailored to you. Features des!igned to deliver viewing and listening enjoyment beyond expectations. Innovation and simplicity of operation become one-ProScan. Improving Your Image • IDTV (Improved Definition TV): High tech video processing gives you twice the number of video scan lines as conventional TVs for superior picture quality.
Thesteps belowwill helpyougetyourTVconnected and working quickly.Thepagenumbers onwhichyoucanfind detailed instructions foreachofthesesteps arealsolistedfor you]: convenience. Turn on the TV, select a channel, and adjustthe volume. 1 Plug the TV's power cord into a wall outlet or suitable power strip outlet. _ower cord into 1 Unpack TV and accessories. The accessories that came packed with your TV include two remote controls, six AAA batteries, and one antenna adapter.
Power Interruption Protection Feature In the first few months of operation, it is normal for your TV Adjust PICTURETILT POLARITYand STRENGTH switches if necessary. to occasionally shut down and immediately turn itself on again. The picture tube in this TV (as in all TV's) operates at a very high voltage and at times may arc internally. Your TV will recognize what is happening and will automatically shut down. This protects the TV's memory from locking up or, in some cases, being erased.
Make sure auto-help displays are turned on. Your TV has a complete menu system that allows you to -form most functions using only the simplified remote. ,, henever one of the menus appears on the TV screen, auto-help displays appear on the bottom of the screen if the Auto Help: on/off function is set to on. AutoProgramthe TV'schannel memory scan list. The channel memory scan list is the list of TV channel numbers your TV will stop on when you press the CHANNEL up or down button.
8 Add or erase channels to the channel memoryscan list. Then press - to highlight the Scan List: out/in function. Then You can add and erase channels from the channel memory scan list as desired. Details are on page 47. press MENUto add or erase the channel from the channel memory scan list. 1 Display the CHANNEL MEM(memory) menu on the TV screen. • Press MENUto select Scan List: in to add a channel. To add a channelto 1 Press MENUto display the MAIN MENU. the channel memory scan list.
Set the clock. The clock must be set before the time will automatically appear on the TV screen. Once the time is set, it will automatically appear whenever you turn on the TV, change channels or press the DISPLAY button. The clock must also be set before you can use some of the special features, such as the scheduler. 5 Press + to select (underline) day of week. Then press MENUtO enter (highlight) the day, Press + or - to enter the correct day of the week. I Display the CLOCK SETmenu on the TV screen.
Operating Remote Controls Using the Remote Controls Before attempting to operate either one of the remote :ontrols, install the batteries as shown below. Aim either remote control at your TV's remote control sensor. The remote controls produce an invisible (infrared) beam that travels in a straight line much as the beam of a flashlight.
Basic Operation Theory (for master remote control) Step 1 ComponentButtons First press one of these five component buttons to tell the remote control which component you want to control. You can program the VCR1,VCB2,CABLE,or AUDIO buttons to control most brands of equipment.* Step 2 Then press the OFF/ONbutton to turn on or off that component. Note: The TV and some other components will automatically turn on when you press the button in Step 1.
For added convenience, the simplified six-button remote also lets you control most of the TV's operations and functions using the advanced menu system. The ProScan master remote that came packed with your TV also controls most brands of VCR's and cable-TV boxes. The buttons shown below can be used to operate :our TV. The rest of the buttons are used to control VCR's, LaserDisc players, audio equipment, or cable boxes and are explained on pages 53-57 and 64.
(_) DISPLAY Button displays time (if clock has been set) and channel number on the TV screen. ® MENU Button and - and + Buttons Press once to display the MAINMENU,then press + or MENU - to highlight (_ CLEAR menu. quickly clears the screen of all on-screen display messages commercial (except Mute). It is also used to cancel the skip count-down clock.
Time and Day-of-Week Display shows the current time and day of the week (after the clock is set) whenever you turn on the TV, change channels, or press the DISPLAYbutton on the master remote control. ------Channel NumberDisplay shows the channel number whenever you turn on the TV, change channels, or press the DISPLAYbutton on the master remote. Antenna B appears with channels from the ANTB input.
i iii i!i!¸i!iiii Your TV's advanced menu system allows you to select and operate any of the TV's functions through the MAINMENU ng either remote control or the TV's front control panel. _,:veral of the TV functions (such as mute, freeze, zoom, PIE channel guide, etc.) can be directly accessed using buttons on the master remote control.
Anytime you are watching a TV program (or a VCR tape through your TV), you will be able to use the special features described below. The PIP (Picture-In-Picture) eature must be tumed off to use these features on the main picture. Note: These features can also be used on the small inset PIP picture. Details are on pages 18-21. Freezeand Zoom with menus To 1 Freeze the Main Picture Press the MENU to display MAIN MENU.
When you are finished, repeatedly To Zoom and Pan the Main Picture highlight Display the Pix-ln-Pix menu as described in steps 1-3 under "7"0 Freeze the Main Picture" Repeatedly on the previous page. press the + or - button to highlight the Zoom Press the MENUbutton to display the ZOOMmenu. function. // press the + or - button to Done and press the MENUbutton to remove the Pix-ln-Pix menu from the TV screen. Note: The menu will automatically disappear after a few seconds if no button is pressed.
Your TV is capable of producing DVE (Digital Video Effects) on the main picture. You can select a mosaic or solarization effect or a combination of both. The speed of :he picture can also be controlled. Repeatedly press the + or - button to highlight t]he digital effect you want (Mosaic or Solarize). To Use DVE(Digital Video Effects) wit,h menus MosaicEffect MENU Press the MAIN tO display When the effect (Mosaic or Solarize) is highlighted, MENU.
Starting ChannelGuide with master remote control Starting Channel Guide with menus To start channel guide, press the CHAN(channel) GUIDE button on the master remote control. Press the MENUbutton to display the MAINMENU.Then press the + or - button to highlight the Channel Guide function. Press MENUagain to start displaying the channels on the screen. • The screen will display all the channels that are programmed into the channel memory scan list, 12 at a time.
Because yourTV hastwoseparate tuners,youcanwatchtwo differentchannels atthesametimewiththetouchofa button.Youcanswapthebigandlittlepicture,movethe littlepicturearoundthescreen, enlarge orreducethesizeof thelittlepicture,orfreezethelittlepicture. PIP Buttons on Master Remote Control PIP and OFF SWAP Button Big Picture Channel 6 Arrow Buttons =[----Little Picture Channel8 Two Football Games onDifferent Channels .
• Press SWAP to switch the small picture with the main picture. Using Other Video Input Sources with PIP The PIP (Picture-In-Picture) feature can be used with video sources (such as VCR's and camcorders) that are connected to the INPUT1 or INPUT2 jacks on the back of the TV. You can only view the picture from one set of INPUT jacks at a time. The picture from the INPUTjacks can be viewed on either the large picture or the small picture. Note: S-VHS video can only be viewed on the main picture.
Using PIP (Picture-In-Picture) with menus Whenever enlarge, reduce, freeze, or swap the big and little picture with Turn on the TV and select the channel you want to watch on the big picture. Display the Pix-ln-Pix menu the Pix-ln-Pix menu. 1 Press MENUto display the 1 Press MENUto display the 2 MAIN highlight 3 2 to P_Pfunction. Pix-ln-Pix MAIN MENU. Press - or + to highlight menu. Press MENU again to turn on PIP. PIP function. 3 Press MENUto display the Pix-ln-Pixmenu.
• To move the small picture left or right: file + or - button to highlight Repeatedly the Move If-rt function. • To change the size of the small picture: press the + or - button to highlight Then Repeatedly the Size function. press Then press press the MENUbutton to display the PIP move If- rt+ display the MENUbutton to display the PIPsize up+ dn- display on on the TV screen. the TV screen.
Your TV is equipped with built-in advanced audio technology. The AUDIO ADJUST menu described on oage 24 will allow you to adjust the equalizer, adjust the leadphone's volume, adjust fight and left balance, select one of eight different audio modes (each with individual setup features), and set the volume limit of your TV. Before you select one of the eight audio modes the AUDIOADJUSTmenu, follow the steps below.
C External right, left, and surroundspeaker(s) connected External External Speaker Speaker D External surroundspeaker(s) connected L Connectthis speaker(s) to speaker the back ofthe "IV.SURROUND --_ _-- on connector(s) labeled Connect these speakers to ._ speaker connectors labeled EXTERNAL on the back of the TV. Connectthis speaker(s) to Surround Surround Speaker (Elevated) Speaker (Elevated) SURROUND on the backlabeled of the TV.
• Stereo expand adds greater depth and dimension to stereo broadcasts and other stereo sources such as stereo VCR's and 1 Press MENU to display laser disc players. the MAiN MENU. Details are on page 29. • Dolby 3 stereo provides fight, left, and center channel sound 2 Then press + or-to high- from Dolby encoded sources. light Audio Adjust in white. front speakers. 3 Press MENU again to Details are on page 31.
The stereo headphone jack on the front of the TV lets you connect optional headphones to enjoy private 'stening without disturbing others. If the plug on your ,eadphones does not fit this jack, adapters are available from your local electronics supply store. Plugging in headphones will not automatically mute the sound from the TV. This special feature allows someone with a hearing impairment to attach a set of headphones and adjust the volume independently from the TV's volume.
The EQUALIZER function lets you display an on-screen graphic equalizer so you can remotely adjust audio bandwidths for different environments or individual tastes. Adjusting Graphic Equalizer with menus Display the Graphic Equalizer. Adjusting the graphic equalizer is primarily a matter of personal taste. The adjustments allow certain characteristics of the audio to be changed without affecting others. For example, if someone enjoys sharp, clean horns (brass), increasing the 4.
Listening "tips Adjust the equalizer according to the type of music you are listening to. You can start from these examples and adjust sound to your preference. Jazz and the 50's I I Bass Voice Guitar Electric Guitar Vocalsand Talk Shows Flute Alto Saxophone Trombone Piano Bass Drum 60Hz Cymbals 150Hz 400Hz IkHz 2kHz 4.5kHz IOkHz Rock 60 Hz...Gives these low, "real" bass sounds more or less impact. this area is where many systems and/or programs are weak.
Your TV is fully capable of reproducing stereo sound from TV stations transmitting stereo sound in your area. Jthough you can adjust the stereo functions to only produce rounD sound, you may prefer to leave the Mode: stereo/mono function set to Mode: stereo. That way your TV will automatically reproduce stereo or monaural sound, whichever is broadcast. 2 Make sure the Stereo mode is turned on (-on appears to the right of Stereo).
Your TV includes an expanded stereo feature which adds greater depth and dimension to stereo broadcasts. Your TV electronically increases the stereo image from the speakers so you perceive an "expanded" more spacious stereo sound effect. Stereo expansion enhances the ambience of music and program material. Dramatic effects of spatial enhancement can be experienced with music.
Some TV stations that broadcast stereo also broadcast another audio program called SAP. SAP stands for Second udio Program and is sometimes used to broadcast a :cond audio track for a bilingual movie. In order to receive SAP broadcasts you must first turn on the SAP function for each channel you want to receive SAR To turn on SAP follow the steps below. Closed Captioning lets you display the audio portion of a program as text on the TV screen.
The Dolby 3 stereo mode actively decodes sur_round encoded audio to provide _,hannel sound. The center channel Dolby* 3 Press the MENU button to enter the DOLBY 3 SETUP menu. left, right, and center makes the actor's Dice appear to come from the TV screen regardless of where you are sitting in the room. To hear Dolby 3 stereo, you must attach right and left front speakers to the EXTERNALspeaker terminals on the back of the TV.
Selecting The Prologic mode actively decodes Dolby surround encoded audio to provide left, right, center, and rear ch_mnel sound. The center channel makes the actor's Prologic 1 Connect external Mode speakers to the €oice appear to come from the TV screen regardless of where you are sitting in the room. Prologic electronically decodes the predominant sounds at a given time and automatically emphasizes that channel's volume.
• Press MENUwhen Volume is highlighted to enter the Saving, Restoring, and Returningto Factory Settings VOLUMEadjustment display. Press + to increase or - to decrease the TV's volume. This volume control raises and lowers the volume of the internal, external, and surround speakers. Note: If the VOLUME display stops before it is at full volume and the volume is not high enough, check the Volume limiter to see if it is set too low. Details are on page 24.
Prologic phantom mode is the prologic mode to use if you have external surround speaker(s) connected to the SURROUND connector(s) on the back of the TV, but no front ight and left external speakers connected. Selecting Prologic Phantom Mode with menus 1 Connect surround It uses the Prologic decoder, but splits the center channel between left and right channels. It then uses the TV's internal speakers for the right, left, and center audio.
• Press MENUwhen Volume is highlighted to enter the Saving, Restoring,and Returningto FactorySettings VOLUMEadjustment display. Press + to increase or - to decrease the TV's volume. This volume control raises and lowers the volume of the internal, external, and surround speakers. Note: If the VOLUME display stops before it is at full volume and the volume is not nigh enough, check the Volume limiter to see if it is set too low. Details are on page 24.
These modes provide surround sound generation and require rear speakers. There are three surround modes to choose from. Matrix surround simulates surround sound from a menu broadcast. Hall surround provides surround sound from ;tereo signal, and stadium surround delays the rear sound .onger than hall surround which gives you the feeling of being in a larger area.
1 Press MENU to display the MAIN MENU. The Color temp (temperature): cool/med/warm fimction lets you adjust the blue and red hues of the overall picture to your 2 Repeatedly press+ or- personal preference. to highlight the Video Press + or -to change. Adjustfunction. 3 Press MENU to display The Noise reduce: Iow/med/high function allows you to remove VIDEOADJUST menu. some of the picture noise caused by a weak signal.
After setting the video functions to your personal preference as described on page 37, you can use the MEMORY MENUto save and restore them. This is helpful in _se someone changes them accidentally. To Restore Your Personalized Settings: Press the + or- The,.MEMORY MENUalso lets you restore the color, tint, contrast, brightness, and sharpness settings to their factory settings. video setup function. To Save and RestoreYour Personalized Video Settings wit,_ menus 1 f)isplay the MEMORYMENU.
After setting (expanded) SUiRROUND lescribed the audio functions on the STEREO,EXPD STEREO, DOLBY 3, PROLOGIC, SETUP menus on pages MATRIX, To Restore Your Personalized Settings: or personal preference as you can use the MEMORYMENUto to your 28-36, save them. This is helpful accidentally. To save and restore shown below. PHANTOM, in case someone your settings, changes them Press t:he + or - button to highlight the Restore audio function.
1 3 Press the MENU Scheduler allows you to program ,./our TV with up to three separate buttonto display the programs. MAIN MENU. and turn off automatically. Repeatedlypressthe scheduler + or- buttonto the scheduler highlight Setup in only once or repeat every week at the same time. Press the MENU white. button when Scheduler Pressthe MENU menu. buttonagain to It will turn on automati,zally, only one time or you can select rpt. (repeat) weekly to run every week at the same time.
Your TV has two separate antenna inputs on the back (labelled ANTA and ANTB) that allow you to connect two different signal sources if desired. For example, you can anect a cable-TV system to one input and a home antenna J the other input. ChangingAntenna Input with menus 1 Press the MENUbutton to display the MAINMENUon the TV screen. Press the + or - button to highlight Setup. By pressing the ANT(antenna) button on the remote control, you can switch back and forth between the two signal sources.
Your TV set allows you to create a separate priority channel memory scan list consisting of up to six of your avorite channels. You can then set the Channels: normal/priority function to Channels:priority SOthe TV will only stop on the priority channels when you press the CHANNEL up or down button. 5 Press the + or - button to select another channel. Setting Up Priority Channel Scan List with menus 1 Display the PRIORITYCHANmenu on the TV screen.
The VCR/cablesetup function lets you program to which channel the TV will automatically tune when you press the !, VCR2,or CABLE button on the remote. This is handy if connect a VCR, LaserDisc player, or cable box to your ;FV. You will no longer have to remember to which input jacks the VCR, LaserDisc, or cable box is connected because the TV will remember for you.
The scheduler allows you to enter up to three separate programs. The TV will turn on automatically at the time selected, tune to the selected channel, and turn off automatically at the selected time. Each program can be set for one-time or to be repeated weekly. • If you select entries: current, when you press the MENUbutton, the channel number and antenna input you are tuned to, current time, and day of the week will automatically The mode function will be set to once. appear.
Select the day or days of the week you want the TV to turn on. Set the time you want the TV to turn on. 1 Press the + button to select (underline) the on: hr function. Then press the MENUbutton to enter (highlight) function. Repeatedly the on: hr press the + button to enter a higher hour or the - button to enter a lower hour. button to exit (remove highlight) Press the MENU Press the + button to select (underline) MENUbutton to highlight the day. Press the the day.
Tile channel memory scan list is the list of channel numbers your TV will stop on when you press the CHANNEL Up,or down button. You can program any list of channels inl:o the channel memory. Press the MENUbutton to start the TV autoprogramming. The TV will first program all channels and then program all channels for ANTA input for ANTB input (even if you have only one antenna input connected). The quickest way to program the channel memory is to use the Autoprogram function.
Press MENUto add Adding and Erasing Channels in Channel Memory with menus Display the CHANNELMEM (memory) (Scan List: in) or erase (Scan List: selected channel in the channel memory menu on the TV screen. • To add a channel, out) the scan list press MENUto change the Scan List: in/out function to Scan List: in. 1 Press the MENUbutton to display the MAiNMENU. 2 Repeatedly // press the + or - button to highlight Setup in white. --J"- 3 Press the MENU button again to display the SETUP menu.
The channel labeling function lets you enter labels (names) for each channel number. The label you enter will then ppear in the channel number display below the channel _Jumber. You can select from 107 built-in labels or create your own label (up to five characters) for each channel. Labeling Channels with menus Select one of the built-in labels or create your own label (up to four characters). Select a built-in label 1 Press the + or - button to display one of the alphabetical built-in labels.
Create your own label Continue to label channels 1 the Channel function and selecting a label with the Label Press the + or - button to select Label: You Enter and create your own label (up to five characters) characters. using the built-in by entering the channel number in function. When you are finished, MENUbutton. highlight Done and press the ABCDEFGHIJKLMNOPQRST UVWXYZabcdefghijk lmnopqr stuvwxyz0123456789.
Parental control lets you lock out any channels that you do not want your children to watch. The channels you lock _ut can not be accessed from the front of the TV. The channels are still accessible using either remote control. Just hide the remote controls if you do not want your children to access the locked out channels. Press MENUand then press + or - to highlight the Parent Ctrl: on/off function. Activating Parental Control with menus 1 Display the CHANNEL MEM menu on the TV screen.
Auto demo, IDTV demo, and Sleep derno:These functions can be activated to let your TV automatically demonstrate key features. Pressthe MENU buttonto display the MAIN MENU. • Auto derao displays a variety of your TV's special features including 1DTV (Improved Definition TV) and PIP (Picture-In-Picture). Repeatedlypressthe + orbuttonto highlight Special functionsin white. • low (Improved Definition TV) derao displays a split screen simulation comparing normal TV to IDTV.
The sleep timer can be programmed to automatically turn :off your TV after a period of up to 9 hours and 30 _?i_inutes. . This is useful if you want to watch TV for an _::"_ hour or so before going to bed. The sleep timer will begin to count down to zero. The amount of time in the SLEEPTIMERmenu will appear with the channel number display on the TV screen whenever you change channels or press the rv or master remote control.
,,emote ButtonsThat Control ProScan LaserDisc Players The advanced ProScan universal master remote control can also control a ProScan LaserDisc player with the VCR2 buttorL Q DISPLAY Button: Press to display information (_) CLEARButton: Press to clear search operations entered incorrectly To control a compatible ProScan LaserDisc player, first press the VCR2button to put the remote control in the "LaserDisc" mode. The buttons shown above will then operate the LaserDisc player.
General Accessory Cable Information Antenna (or cable-TV) connections are made with either ;oaxial antenna cable or twin-lead cable. Coaxial cables - are shielded so they are less susceptible interference from adjacent cables. to hum or The following accessories are available from most ProScan dealers and electronics supply stores in case you want to position your components farther apart or need additional cables.
To program the remote to control another brand of VCR, ju,;t press VCR1(or VCR2), then ID,then the two-digit code number for your brand of VCR. Although most VCR's are compatible, the TV's remote may not be able to control every VCR brand and model depending on the VCR's age and remote control system.
Refer to the chart below to find the code number that The digital remote control that came packed with your TV is also capable of controlling a compatible audio component. To program the remote just press the AUDIObutton, then press the IObutton, then enter the two-digit code number for your brand of audio equipment from the chart below. corresponds to the brand name of your audio equipment. If more than one number is li:_ted, you may need to try each one separately to find the one that works.
After the AUDIO button is programmed, the buttons described bellow will operate the basic functions of most audio equipment. Depending on the age, brand, model, and type of audio equipment, some models may not be able to respond to all the function buttons listed. You will want to experiment with each button to determine the exact function for your component. @ AUDIOButton: Press to put remote in "Audio Mode" so other buttons will control the audio component.
iiii_iiii!ii!i_iii!_iiiii%%!i!i_! (_) Q (4_ _) AUDIOOUTPUTSSURROUNDJack AUDIOOUPUTS (SELECT R]MONO and LEFT)Jacks, VIDEOOUTPUTS(SELECTVIDEO OUTPUTJack, and SELECT S-VIDEOOUTPUTConnector) (_) EXTERNAL Speakers Terminals AUDIO OUTPUTSCENTERJack PICTURETILT POLARITY (-1+) Switch AUDIO OUTPUTS HI-FI (R]MONO and LEFT)Jacks __ (R/MONO and LEFT)Jacks ]_) AUDIO INPUTS2 (R]MONOand LEFT)Jacks CABLE]ANTENNA (ANT A, ANT B, and CONVERTER Connectors _ VIDEOINPUT 1 Jack and S-VIDEOINPUT 1 Connector (_ VIDEO
AUDIO OUTPUTSHI-FI (R/MONO and LEFT)Jacks feed volume-controlled stereo audio out from whatever is @ EXTERNALSpeakersTerminals permit displayed on the TV screen. Allows connection of an external audio amplifier and still lets you adjust sound level with the TV's remote. Optional speakers and amplifier are required. Connection details are on page 70. AUDIOOUTPUTS CENTER Jackfeeds volume-controlled "center-sound" audio out from whatever is displayed on the TV screen.
CompatibleComponents Plugging in Power Cords A wide variety of compatible VCR's, camcorders, and LaserDisc players are available. Check with your dealer for details. Do not plug your TV's power cord into another component's outlet (switched or unswitched). Your TV should only be plugged into a wall outlet or suitable power strip outlet. Other brands of components can also be connected to your TV. Refer to the component owner's manual for the manufacturer's recommended hookup instructions.
Follow one of the steps below to connect !_k° If your home antenna only UHF (channels an indoor cable is a 75-ohm, or outdoor round, coaxial antenna to your TV if you do not have a cable-TV cable that carries only VHF (channels 14-69), or VHF and UHF channels, connect system.
Follow one of these steps to connect a cable-TV system to your TV instead of a home antenna. vary, you may wish to consult your local cable-TV company for additional information. !_.ko Follow this diagram if your cable company does not require a converter/decoder Since cable-TV systems box (no scrambled channels): Back of TV CABLEI ANTENNA ANT A Incoming Cable _ ANT B CONVERTER R.
l-), Follow this diagram if your cable company requires a converter/decoder connect a VCR. box for premium channels and you also want to Back of "IV Coaxial Antenna Cables* (such as AH037 or AH065G) CABLE/ ANTENNA ANT A AI_TB Incoming Cable CONVERTER 2-way Signal Splitter*_ (such as AH047) Remember to tune the TV to the output channel of the VCR (usually 3 or 4)-the same channel as the position of the VCR's CH3/CH4 switch.
If your cable box has its own remote to change channels, you will probably be able to program the TV's remote to control both the TV and the cable box. The TV's remote is designed to control several brands of cable boxes. To program the remote, just press CABLE, then IO,,then the two-digit code number for your brand of cable box. Refer to the chart below to find the code number for your cable box. Press the OFF/ONbutton next to confirm operation.
Your new TV is designed to receive up to 181 channels in the U.S.A. including 125 unscrambled cable channels (see chart at right). To use this TV with a cable-TV system, conftrm that the cable-TV system is properly connected to your TV. Since cable systems vary, you may wish to consult your local cable-TV company for additional information.
These connections allow you to record TV programs and play back tapes. ')referred Method -- Optional S-VHS Cable* (such as 186008) z.wa litter** Coaxial Antenna Cables* z_ ,i Incoming Cable From Antenna or Cable-'rv System ** Tlmsu optinnal accessories (nne AH0472-way splitter, two AH065G-antenna cnbles, end one AH077G-audio/video cable) are avaiJable as a kit under #AVHbO0. Shown here is the preferred method of connecting a VCR to your TV if you are in an area with good signal reception.
Special RecordingontoVCR Optional S-VHS Cable" (such as 186008) Back of i S-VIDEO IN Audi( |suchasAH_) This connection only allows you to record on the VCR whatever is currently being displayed on the TV screen except for menus and special effects. This is not a common application for recording with your VCR, but you may find it useful in certain situations. You will also be able to record signals from another VCR (or similar device) that is connected to the TV's INPUT1or INPUT2 jacks.
Optional S-VHS Cable* (such as 186008) , AUDIO OUTPUTS CI_rrER Back of TY , SELECT Back of Laser Disc Player VIDEO I_'rPUTS i (such asAH069G) Audio/Video Cables*-- am-- LB_J S-VHS or Standard Laser Disc Player An S-VHS or standard laser disc player can be connected directly to your TV. If you have another device, such as a VCR connected to the INPUT1 jacks, you can connect the player to the INPUT2 jacks.
S-VHS Cable (sometimes a separate cable that attaches directly to camcorder) -[--'l÷ _ AVIO0_ m -- (Audio/Video Out) (Usually Supplied With Camcorder) ;_'TURe1LT lidao S-VHS or StandardVHS Camcorder(Playback) This connection allows you to play back tapes in the camcorder and watch them on the TV. Notes: If your camcorder has stereo audio cables, connect LEFTand right to R/MONO.
AudioAmplifier _f your amplifier is not part of a "system" that has its own emote, connect it to the TV as shown here. (If the amplifier is part of a system that has its own remote, you may choose to cormect it to the TV as shown below using the SELECT OUT jacks.) Back of "rv Audio/Video Cables* (such as AH069G) _m With the connection shown here, you will be able to change and mute volume with the TV's remote control.
Surround SoundAudio Connecting an amplifier to the AUDIO OUTPUTS SURROUND jack gives you the ability to get more surround-sound audio volume than the SURROUND speakers terminals will allow. With the connection shown here, you will be able to adjust the volume of the surround sound audio by using the Rear volume function on the AUDIO ADJUST SETUP menus for prologic, prologic phantom, matrix Back of TV Audio/Video Cable* --i ,sac, as....
You can connect up to four additional speakers to the back of your TV-two to the EXTERNAL speakers terminals and two nore to the SURROUNO speakers terminals. If you connect a stereo amplifier or receiver to your TV, you may prefer to connect the speakers to the amplifier or receiver instead of the speaker terminals on the TV.
EXTERNALSpeakersTerminals ConnectingSpeakers to Back ofTV If you connect an amplifier or receiver to your TV, connect the speakers to the amplifier/receiver instead of the TV. You can also connect additional surround speakers to the back of the TV, if desired. If you do not connect an amplifier or receiver to your TV, you can connect external speakers to the back of the TV to enhance sound from the TV. The diagram at the right shows how to connect external speakers to the terminals on the back of the TV.
General Accessory Cable Information Antenna (or cable-TV) connections are made with either ;oaxial antenna cable or twin-lead cable. Coaxial cables - are shielded so they are less susceptible interference from adjacent cables. to hum or The following accessories are available from most ProScan dealers and electronics supply stores in case you want to position your components farther apart or need additional cables.
AudiolVideoCablescontinued Stereo Audio Cable Double gold-tipped cable generally used for connecting stereo audio components. Gold-'tippedCable AH072G(3-ft) Accessory S-VHS Video Cable has multipin connectors on each end for connecting S-VHS components to your TV. When connecting an S-VHS component to the S-VIDEO jack on your TV, remember to also connect the left: and right audio cables to the AUDIOINPUTjacks because the S-VHS cable carries only the picture, not the sound.
To order accessories, contact your local ProScan Dealer. If a dealer is not nearby, you can also follow the instructions below to order by telephone. Charge your order on your VISA or MasterCard by filling in below USE YOUR CREDIT CARD United States Orders IMPORTANT: To place your order by phone, have your Visa or MasterCard ready and call the toll-free number listed below between 8AM and 8PM Eastern Standard Time. Use this number only to place an order for accessory items listed on this order form.
General Specifications Color Standard: NTSC Color Chassis: CTC170, solid state IDTV "_wer Requirements: 120VAC ± 10%, 60Hz 300W maximum wer Consumption: RemoteControl Model: CRK62D and CRK60A Transmission system: Batteries: Digitally encoded Battery Life: One Year in Normal Use CRK62D: CRK60A: RFSpecifications Tuning System Type: The ProScan NoGlare TM picture tube has a special lithium silicate faceplate that reduces glare.
Troubles sometimes arecaused bysimple"faults"thatyou caneasilycorrect without thehelpofaservice technician by Turns on unexpectedly • Ytrstchecking a few basic remedies. Before you call or take your unit to an Authorized ProScan TV Servicenter, look below for the type of trouble you are experiencing. Then perform the simple checks and adjustments listed for that trouble. SCHEDULER function may have been activated. SCHEDULER does not turn TV on and off at correct • Check SCHEDULEafunctions.
Noisy stereo reception • Maybe a weak station. Set the Mode: stereo/mono function in the STEREO SETUP menu to Mode: mono. Details are on page 28. No picture, no sound but power light is on • Wrong antenna input (a or e) selected. Try pressing ANT (antenna) button on master remote. Details are on page 41. • Cable/air function on SETUPmenu has been accidentally changed, Details are on page 40. • Maybe a vacant channel is tuned.
+ and - Buttons ................................................................ 6,10-12 Accessories, Included ................................................................. 3 _.ccessories, Optional ......................................................... 74-76 .... Accessory Cables, General ....................................................... 74 Accessory Order Form ......................................................... 75-76 Active Channel Displays ...............................................
REWtNDButton ..................................................................... 54,57 Laser DiscPlayer, Connections ............................................... 68 S-VIDEOINPUT1 Connector ......................................... 58,66,68,69 LaserDisc Player, Remote Control Buttons ............................. 53 S-WDEOJNPUT2 Connector ......................................... 58,66,68,69 Limited Warranty .....................................................................
PROSCAN We are committed to your complete satisfaction and viewing enjoyment. Any time you have a question or want information about your ProScan product, call our friendly toll-free number listed below. We're always ready to help you Monday through Friday, 7 a.m. to 7 p.m. EST, year round.
