Pro846 USER‘S GUIDE 8 ® C A M C O R D E R
Important Safety Information Be sure to read all the safety information before you begin to use this product. WARNING: To reduce the risk of fire or shock hazard, do not expose camcorder or AC adapter/charger to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
Assistance We want to make sure you enjoy your new camcorder. If you have any questions, call: Camcorder Exchange Warranty...... 800-283-6503 (Pages 66-67) Customer Service..................................... 800-336-1900 (Page 65) Accessories......................................... 800-338-0376 (Pages 55-61) Table of Contents Safety Information................................i Product Registration.............................i • Install Remote Battery ........................9 • Remote Sensor ........
Table of Contents Video Cassettes • Erase Protection ................................20 • Recording and Playback Speed and Times..............................................20 • Inserting and Removing Cassettes.........................................21 • Cassette Care and Storage.................21 • Synchro Edit ................................40-41 • Recording from VCR or TV Monitor...............................42-43 Optional Color Enhancement Light.........................................
First-Time Operation This section describes only the basic steps necessary to set up your camcorder to record. Refer to the other sections for detailed operation and feature options. Assistance The toll-free numbers are available to help you with any problem you may encounter. Camcorder Exchange Warranty . . . . .800-283-6503 Customer Service . . . . . . . . . . . . . . . .800-336-1900 Accessories . . . . . . . . . . . . . . . . . . . .800-338-0376 1. Unpack the camcorder and accessories.
First-Time Operation 2. Attach the adapter/charger. W F T. INS OM ZO Adapter/Charger’s DC Cable T Adapter/ Charger OPEN FOCUS N DATE/TIT LE DC IN 6V PLAY DISPLAY REW EDIT SEARCH F.F. STOP DC IN 6V Jack on Side of Camcorder POWE R DC OUTPUT Jack CHAR GE REFR ESH POWER Indicator Since the battery must be charged before it can be used the first time, attach the adapter/charger. • Attach one end of the adapter/ charger’s DC cable to the DC OUTPUT jack on the adapter/ charger.
First-Time Operation CAM/OFF/VCR Switch Lens Cap W F . INSTOM ZO T OPEN FOCUS N DATE/TIT LE DC IN 6V (Attach Lens Cap Here) PLAY DISPLAY REW EDIT SEARCH F.F. STOP Handstrap Cover Thumb Trigger 4. Attach the lens cap cord and adjust the handstrap. A. Remove the lens cap from the camcorder. B. Attach the lens cap cord to the lens cap. Lens Cap Lens Cap Cord C. Unsnap the handstrap cover and open the adjustment strap. Lens Cap Lens Cap Cord Handstrap Cover Adjustment Strap D.
First-Time Operation Eyepiece Focus Control Electronic Viewfinder in Operating Position W F . INSTOM ZO T OPEN FOCUS Tally Light N DATE/TIT LE DC IN 6V PLAY DISPLAY REW EDIT SEARCH F.F. STOP Thumb Trigger 6. Adjust eyepiece focus control for your vision. A. Rotate viewfinder into a comfortable viewing position. B. If the image in the viewfinder is blurry, adjust the eyepiece focus control for your vision. Details are on page 29. 6 7. Start and stop recording.
First-Time Operation 8. Play back what you have recorded. A. B. C. D. E. F. Press thumb trigger to stop recording. Place CAM/OFF/VCR in VCR. Press REW to rewind the tape. Press PLAY to play back the tape in the viewfinder. Press STOP when you are finished. Details on viewfinder playback are on page 48. 9. Review camcorder’s operating controls.
First-Time Operation 9. Review camcorder’s operating controls. (continued) Power Zoom Buttons T = Telephoto W = Wide Angle INST. ZOOM Button CAM/OFF/VCR Switch W F T. INS OM ZO Accessory Shoe T Tally Light (On Front) Remote Control Sensor (On Front) OPEN FOCUS N DATE/TIT LE Lens DC IN 6V PLAY DISPLAY REW EDIT SEARCH F.F.
Remote Control Install Remote Battery Battery Holder Back of Remote 1. Turn remote over, insert a pin or straightened paper clip in the pin hole, and remove the battery holder. 2. Insert battery so positive (+) terminal faces up. 3. Replace battery holder. Notes: Never place anything heavy on top of the remote control or lay it upside-down. Replace battery when camcorder fails to respond to remote. Remove the battery from the remote if it will not be used for a month or more.
Remote Control Location and Function of Remote Buttons A brief description of the functions of the remote buttons is given here. Some buttons perform the same function as the corresponding controls on your camcorder. You can use whichever is more convenient at the time. Note: An RCA VCR that is set to respond to VCR 2 on the VCR’s remote may respond to this remote when it is used to operate the camcorder. REW F.FWD 1 REW (Rewind) Button 7 F.
Remote Control 2 STOP Button • Press STOP when the camcorder’s CAM/OFF/VCR switch is in VCR to stop playback, rewinding, or fast forwarding. • STOP has no effect when the camcorder’s CAM/OFF/VCR switch is in CAM. To stop recording, press PAUSE/RECORD. 3 A/V (Audio/Video) DUB Button • Use this button to record new audio and video in place of existing audio and video on a recorded tape. • Details are on pages 38-39. 4 DISPLAY Button • Press DISPLAY to turn the time counter’s memory-stop feature on and off.
Powering Your Camcorder Using the Adapter/Charger to Power Your Camcorder The adapter/charger attaches to the camcorder and lets you power your camcorder directly from standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz. W F T. INS OM ZO Adapter/Charger’s DC Cable T Adapter/ Charger OPEN FOCUS N DATE/TIT LE DC IN 6V PLAY DISPLAY REW EDIT SEARCH F.F.
Powering Your Camcorder Using the Rechargeable Battery to Power Your Camcorder The battery must be charged before it can be used the first time. Initial charging will take approximately one hour. When fully charged, the battery should supply about 45-55 minutes of operating time (depending on how much you use zoom and pause). Note: Use the small marker switch on the top of the battery as a reminder to help you remember to recharge the battery. It has no other function.
Powering Your Camcorder Using the Rechargeable Battery to Power Your Camcorder Insert the Battery 1. Make sure the CAM/OFF/VCR switch is in OFF. 2. Lift the OPEN lever and pull up the battery compartment cover. OPEN Lever 5. Close the battery compartment cover. Hold the OPEN lever and align the tabs on the cover with the tabs on the compartment. Tabs 3. Insert the battery into the battery compartment aligning the reference marks.
Powering Your Camcorder Proper Care and Storage of Your Battery The battery will provide better service and longer performance if you refresh it before charging and store it at normal room temperature. Do not operate the battery at temperatures below 14°F (–10°C) or above 95°F (35°C). The battery may be damaged if operated at temperatures above 122°F (50°C). Operation time will decrease at extremely low temperatures. After repeated chargings and use, the operation time will gradually decrease.
Powering Your Camcorder Using Alkaline “AA” Batteries to Power Your Camcorder The camcorder can be powered by six alkaline dry-cell “AA” batteries. The operation time of the camcorder depends on the type of alkaline batteries used. Insert the Batteries 1. Make sure the CAM/OFF/VCR switch is in OFF. 2. Lift the OPEN lever and pull up the battery compartment cover. 5. Close the battery compartment cover. Hold the OPEN lever and align the tabs on the cover with the tabs on the compartment.
Powering Your Camcorder Safety Precautions When Using Alkaline Batteries Do not short, disassemble, heat, or throw the batteries into the fire. Batteries become warm during and after use. Use caution when removing them. Use “AA” alkaline batteries only during their recommended lifetime. Remove at least one battery if you will not be using the camcorder for a long period of time to extend the batteries useful life. Do not use manganese batteries to power the camcorder.
Powering Your Camcorder Using the Optional Thomson Car Cord Adapters The optional DCC06 car cord adapter and DCC80 car cord adapter/charger allow you to power your camcorder from the cigarette lighter socket of a car, truck, or RV. They convert 24- and 12-volts to a 6-volt output. The DCC80 can also charge the battery that came with your camcorder and the BB150 battery. Notes: Consult instructions enclosed with the DCC06 or DCC80 for details.
Powering Your Camcorder Use DCC80 Car Cord Adapter/Charger to Power Camcorder W F T. INS M ZOO T OPEN FOCUS Car Cord Adapter N DATE/TIT LE DC IN 6V PLAY DISPLAY R F.F. WE EDIT SEARCH PO REW STOP Cigarette Lighter Socket DC OUTPUT Jack DC IN 6V Jack Adapter/Charger’s DC Cable 1. Make sure the camcorder’s CAM/OFF/VCR switch is in OFF. 2. Connect the DC cable’s small plug into the DC OUTPUT jack on the car cord adapter/charger. 3.
Video Cassettes We recommend RCA cassettes be used with your camcorder. Use of poor quality or damaged tapes can contaminate the video heads, resulting in snow or no picture during playback. Head cleaning is not covered under warranty. It is considered normal maintenance. Playing a new RCA tape for approximately 30 minutes will often satisfactorily clean the heads and improve your picture. Erase Protection – Safety Tab You can use your video cassettes over and over again.
Video Cassettes Inserting and Removing Cassettes EJECT Switch CT EJE S CU FO F N LE /TIT DATE Safety Tab Y Y SPLA PLA DI REW Cassette Door PUS H EDIT CH SEAR F.F. Tape Window PUSH Caution: Insert the cassette with the safety tab and tape window facing out. The cassette should slide easily in the compartment. Do not force it. 1. Slide EJECT to open the cassette compartment. 2. Fully insert cassette with tape window and safety tab facing out. 3.
Recording Features H PUS Tally Light Microphone Microphone Tally Light The microphone picks up the sound during a recording. It is more sensitive to sounds coming from the direction the lens is pointed. The tally light on the front of the camcorder lights when the camcorder is recording. Quick Review Flying Erase Head A separate erase head is mounted on the spinning headwheel (hence the term “flying”). This allows you to make clean edits without the “glitches” or “rainbow noise” that may occur.
Recording Features CAM/OFF/VCR Switch REW F.FWD STOP PLAY A/V DUB PAUSE REW Button STOP Button W PLAY Button T. INS OM ZO T F.FWD Button PLAY Button DISPLAY RECORD F OPEN FOCUS T N DATE/TIT LE EDIT SEARCH FF and REW Button DC IN 6V RESET ZOOM TITLE ON OFF S.EDIT PLAY W DISPLAY REW EDIT SEARCH F.F. STOP STOP Button EDIT SEARCH EE and F.F Button Edit Search Tape Positioning Edit search uses EDIT SEARCH FF, EDIT SEARCH EE(REW and F.
Recording Features Time-Remaining Display The time-remaining display shows the amount of recording or playback time left on the tape in the camcorder. The display will display “– – – – – –” for approximately ten seconds when you first start playing or recording a tape while the camcorder calculates the time remaining. After the time is calculated, the timeremaining indicator appears in the viewfinder. • TAPE END flashes when there is approximately three minutes of recording time left on the cassette.
Recording Features Date Search You can search for the beginning and end of recordings you make on a certain day. CAM/OFF/VCR Switch REW F.FWD STOP PLAY A/V DUB PAUSE REW Button STOP Button W T. INS OM ZO F.FWD Button PLAY Button T DISPLAY RECORD DISPLAY Button F OPEN FOCUS N DATE/TIT LE DC IN 6V DISPLAY Button T RESET ZOOM TITLE ON OFF S.EDIT W PLAY DISPLAY REW EDIT SEARCH REW Button F.F. STOP STOP Button F.
Date and Time Display Set the Date and Time The clock cell must be installed as shown on page 28 before you set the clock. CAM/OFF/VCR Switch W PLAY Button F T. INS OM ZO T OPEN FOCUS N DATE/TIT LE DC IN 6V PLAY DISPLAY REW REW Button EDIT SEARCH F.F. STOP STOP Button F.F Button DATE/TITLE Button 1. Attach a power supply to the camcorder. Press and hold the small button on the CAM/OFF/VCR switch while you slide it in CAM. 2.
Date and Time Display Recording Date and Time, Date, or Date and Title on Your Tape The time and date, date only, or date and title can be recorded on your tape. Whenever one of the displays appears in the viewfinder, it will be recorded. The camcorder also has auto date and auto title features. The clock cell must be installed and the clock set.
Date and Time Display Install the Clock Lithium Cell 1. Make sure camcorder is turned off, and remove any power supply attached to the camcorder. 2. Pull out the cell holder. 4. Place the cell holder into the camcorder. 3. Insert the clock cell into the cell holder with the “+” terminal facing out. Lithium Cell Battery Cell Holder Note: Remove the battery from the camcorder if it will not be used for a month or more. This will prevent possible damage from battery leakage.
Viewfinder The camcorder’s viewfinder is a miniature monitor that displays the picture seen by the lens. CAM/OFF/VCR Switch Viewfinder Eyepiece Focus Control CT EJE S CU FO F N LE /TIT DATE LAY SP PLAY DI PUS REW H EDIT CH SEAR COLOR F.F. TINT BRIGHT P STO Eyepiece Focus Control The eyepiece focus control lets you set the focus of the viewfinder for your personal vision. If you wear eyeglasses, you can probably operate the camcorder without them. 1.
Displays in Viewfinder Displays in Viewfinder 1 AE Shutter Speed 5 AE:1000 FOCUS 0:00:35M 2 Manual Focus Time Counter with Memory 6 Time Remaining 7 3 ZOOM, I.ZOOM, and Zoom Level ZOOM TAPE T Battery Level Indicator 8 TAPE, NO TAPE, or TAPE END A/V DUB W REC 10:30AM 11/18/1995 9 Time and Date 4 Status Several displays that aid in the operation of the camcorder appear in the viewfinder. The only display that is recorded on the tape when it appears is the date display.
Displays in Viewfinder REW F.FWD STOP PLAY A/V DUB PAUSE CAM/OFF/VCR Switch ZOOM and INST. ZOOM Buttons DISPLAY Button W F T. INS M ZOO DISPLAY RECORD T T RESET ZOOM TITLE ON OFF S.EDIT W OPEN FOCUS ZOOM Buttons N DATE/TIT LE DC IN 6V PLAY DISPLAY REW EDIT SEARCH F.F. STOP FOCUS Buttons DATE/TITLE Buttons 6 Time Remaining • displays the amount of recording or playback time left on the cassette in the camcorder. • Details are on page 24.
Focusing Your Camcorder Power Zoom Buttons “ T ” a n d “W ” W F . INSTOM ZO T OPEN FOCUS N DATE/TIT LE FOCUS F (Far) and N (Near) Buttons DC IN 6V PLAY DISPLAY REW EDIT SEARCH F.F. STOP Auto Focus The camcorder will focus automatically whenever FOCUS does not appear in the viewfinder. • If FOCUS appears, press FOCUS F and N at the same time to turn on auto focus. The camcorder will automatically focus on the subject in the center of the viewfinder.
Focusing Your Camcorder Manual Focus Under certain conditions, such as those listed, you may need to focus manually. 1. Press FOCUS F and N at the same time to turn on manual focus. FOCUS appears in the viewfinder. 2. Press zoom button T to zoom in on your subject. To maintain proper focus throughout the zoom range, zoom in on your subject before adjusting the focus. 3. Press and hold either FOCUS button until the subject is clearly focused. 4.
Zooming The motorized zoom lens allows you to zoom in (enlarge the image from 1-12 times) for close-ups or out for wide-angle shots. Digital zoom lets you zoom in on a subject with magnification up to 24 times. Instant zoom lets you magnify the picture 1.5 times regardless of the position of the zoom buttons. Power Zoom Buttons W = Wide Angle T = Telephoto W F T. INS OM ZO N DATE/TIT LE F.FWD STOP PLAY A/V DUB PAUSE T OPEN FOCUS REW DC IN 6V PLAY INST.
Time Counter With Memory Stop The time counter shows actual time elapsed when recording or playing back a tape. It quickly locates the end of recorded segments. CAM/OFF/VCR Switch REW Button W F T. INS OM ZO F.FWD STOP PLAY A/V DUB PAUSE OPEN FOCUS DATE/TIT LE DC IN 6V PLAY DISPLAY Button DISPLAY RECORD EDIT SEARCH F.F. STOP STOP Button DISPLAY Button F.F Button RESET Button PAUSE/RECORD Button T DISPLAY REW F.FWD Button T N REW Button REW RESET ZOOM TITLE ON OFF S.
Titler The titler can store a title page in memory that can be displayed and recorded at any time. The built-in character register contains 47 characters for creating titles on two lines with up to 16 characters per line. CAM/OFF/VCR Switch REW F.FWD STOP PLAY A/V DUB PAUSE REW Button W F T. INS M ZOO T STOP Button PLAY Button OPEN FOCUS N DATE/TIT LE DC IN 6V PLAY DISPLAY REW PLAY Button EDIT SEARCH F.F. DISPLAY RECORD STOP T RESET ZOOM TITLE ON OFF S.
Titler Chart of Characters in Titler’s Register A B N O 0 1 ? ’ . C P 2 / , D Q 3 - ; E F G R S T 4 5 6 : < > ! H I J K L M U V W X Y Z 7 8 9 (Blank Space) Recording Titles on a Tape in the Camcorder 1. Attach a power source and slide CAM/OFF/VCR to CAM. 2. Locate the place on the tape where you want to record the title. Note If you record a title on a prerecorded tape, the audio and video will be erased where the title is inserted.
Audio/Video Dubbing A/V (audio/video) DUB on the remote lets you record new audio and video from another VCR or camcorder to a previously recorded tape in the camcorder. You will need an optional VAA009 audio/video input cable shown on page 57. Notes: The source for audio and video when dubbing is the signal coming through the audio and video plugs of the audio/video input cable. If you connect only the video plug of the audio/video input cable to the VCR, you will have no sound on the dubbed portion.
Audio/Video Dubbing CAM/OFF/VCR Switch W REW STOP PLAY Button PLAY STOP Button T. INS M ZOO T OPEN N DATE/TIT LE DC IN 6V PLAY DISPLAY REW EDIT SEARCH F.F. STOP PLAY Button A/V DUB A/V (Audio/ Video) DUB Button F F.FWD FOCUS PAUSE DISPLAY RECORD T RESET ZOOM TITLE ON OFF S.EDIT PAUSE/ RECORD Button STOP Button Thumb Trigger W To Audio/Video Dub on the Camcorder 1. Slide camcorder’s CAM/OFF/ VCR switch to VCR. 2.
Synchro Edit Synchro edit allows your camcorder to control a VCR (one that has a compatible PAUSE, EDIT, EDIT IN/OUT, or SYNC jack) while tapes are being copied from the camcorder to the VCR. This is convenient when you want to copy only selected segments from a previously recorded tape. An optional AVS80 synchro edit cable shown on page 57 is required. Note: Not all RCA VCRs have compatible synchro edit jacks. CAM/OFF/VCR Switch PLAY Button W REW Button F T.
Synchro Edit REW F.FWD STOP PLAY A/V DUB PAUSE REW Button STOP Button F.FWD Button PLAY Button DISPLAY RECORD T RESET ZOOM TITLE ON OFF S.EDIT PAUSE/ RECORD Button W S.(Synchro) EDIT Button To Synchro Edit 1. Connect your camcorder to a compatible VCR as shown. 2. Prepare the camcorder to play back the tape you want to copy. • Slide the CAM/OFF/VCR switch to VCR. • Insert the tape you want to copy. • Press PLAY.
Recording from VCR or TV Monitor To connect your camcorder to a TV (or VCR) with AUDIO and VIDEO OUT jacks, you will need an optional VAA009 audio/video input cable shown on page 57. If your TV is already connected to a VCR, you can attach the camcorder to the VCR and watch what the camcorder is recording on the TV.
Recording from VCR or TV Monitor Installation 1 Attach the audio/video input cable’s white plug to the AUDIO OUT jack on the TV or VCR. Note: If your TV or VCR has stereo left and right AUDIO OUT jacks, attach the plug to the one labeled MONO. If one is not labeled MONO, you may need a Y-adapter to record both channels. 2 Attach the audio/video input cable’s yellow plug to the VIDEO OUT jack on the TV or VCR.
Optional Color Enhancement Light An optional VLP04 color enhancement light shown on page 55 helps create brighter, sharper pictures in very low light conditions. It lights subjects in darkened areas or corrects unflattering shadows. Light Power Connector Light Power Button Caution: Do not touch the light power connector when the camcorder is on. Tab Accessory Shoe 1. Attach the rechargeable battery or AC adapter/charger to power the camcorder. 2. Make sure the camcorder is turned off.
Optional Color Enhancement Light Cautions: After using the light, be sure to allow it sufficient time to cool down completely. Use only bulb (VLB04) when replacing the bulb to reduce the risk of fire or other hazards. Do not use the light when powering your camcorder with the optional car cord adapter because the car cord will become very hot. Dangers: During operation and after using the light, the front surface and bulb of the light will be very hot. To avoid burns, do not touch them.
Attaching the Shoulder Strap The shoulder strap packed with your camcorder is designed to let you carry the camcorder from your shoulder and – when you are ready to shoot – bring the camcorder to shooting position in one quick movement. To Attach the Shoulder Strap 1. Thread each end of the strap through one of the attachment rings as shown below. Attachment Ring Shoulder Strap Attachment Ring 2. Thread each end of the strap back into its buckle.
Camcorder Recording and Traveling Tips • Do not bump or tap the microphone while recording – this sound will be recorded. Be aware of backgrounds. Background details may show up as visual “clutter”. Noises (especially TV sets, household appliances, traffic, etc.) can detract from the sound you record. • Avoid long “still” shots of landmarks and scenic attractions. Include people and details. “Local color” gives travel videos lasting appeal.
Viewfinder Playback and Playback Features Viewfinder Playback Viewfinder playback is the simplest way to watch tapes using the camcorder. This method is generally used only to review scenes immediately after recording. CAM/OFF/VCR Switch in VCR W EJECT Switch PLAY Button F . INSTOM ZO T OPEN FOCUS N DATE/TIT LE DC IN 6V PLAY DISPLAY REW REW Button EDIT SEARCH F.F. STOP F.F Button STOP Button Thumb Trigger To Play Back a Tape Through the Viewfinder 1.
Viewfinder Playback and Playback Features REW F.FWD REW Button F.FWD Button STOP PLAY STOP Button PLAY Button A/V DUB PAUSE DISPLAY RECORD PAUSE/ RECORD Button T RESET ZOOM TITLE ON OFF S.EDIT W Playback Features Stop-Action Pause Visual Searching • During playback, press the thumb trigger (PAUSE/RECORD on remote) to “stop the action” and view one frame of the tape. • During playback, press and hold F.F (F.
Playback on TV or VCR Using AUDIO/VIDEO IN Jacks To connect your camcorder to a TV or VCR using AUDIO/VIDEO IN jacks, use the audio/video cable that was packed with the camcorder. If your TV is already connected to a VCR, you can attach the camcorder to the VCR and watch what the camcorder is recording or playing on the TV. W F T. INS M ZOO T OPE FOCUS N DATE/TIT LE DC IN 6V PLAY DISPLAY REW EDIT SEARCH F.F.
Playback on TV or VCR Installation 1 Attach the white plug on the audio/video cable to the AUDIO IN jack on the TV or VCR. Note: If your TV or VCR has stereo AUDIO jacks, attach the AUDIO plug to the one labeled MONO. If one is not labeled MONO, you may need a Y-adapter to hear sound from both channels. 2 Attach the yellow video plug on the same end of the audio/video cable to the VIDEO IN jack on the TV or VCR.
Playback on TV without Audio/Video Inputs To connect your camcorder to a TV without audio and video inputs, you need an optional RF output adapter, such as CRF81 shown on page 57. F FOCUS N DATE/TIT LE PLAY DISPLAY REW EDIT SEARCH F.F.
Playback on TV without Audio/Video Inputs Playback Operation 1. Set the CH3/CH4 switch on the RF output adapter to CH3 or CH4. 2. Turn on the TV, and tune it to channel 3 or 4 – the same channel you selected with the CH3/CH4 switch. 3. Attach a power supply, and place the camcorder’s CAM/OFF/VCR switch in VCR. Insert the cassette you want to play back. 4. Press PLAY to begin playback. During playback, use the features on page 49. 5. Press STOP when you are finished.
Care and Maintenance • Keep dust and grit from entering the cassette door. They are abrasive and cause excessive wear both to the camcorder’s recording/playback heads and cassettes. • Always replace the lens cap on the lens when the camcorder is not in use. • When the camcorder is not in use, always remove the cassette and AC adapter/charger or battery. • The camcorder can be damaged by improper storage or handling. Do not subject the camcorder to swinging, shaking, or dropping.
Optional Accessories We invite you to take a look at some great ideas for sparking creativity and adding to the fun of using your 8mm camcorder. These pages have a selection of accessories to help make your memorable moments look and sound even better. These accessories are designed to make the process of recording and watching your videos more enjoyable. To order accessories, contact your local Dealer.
Optional Accessories DCC80 Car Cord Adapter/Charger CPS85 AC Battery Charger POWER CHARGE Caution: Do not use any other car cord adapter/charger with this camcorder. This car cord adapter/charger enables you to operate your camcorder from your car, truck, or RV by plugging it into the vehicle’s cigarette lighter socket. It will also charge the BV060 battery supplied with your camcorder or the BB150 battery.
Optional Accessories CRF81 RF Output Adapter This adapter is used to connect your camcorder to a standard TV (one without audio/video input jacks) for playback. If your antenna cable is the flat twin-lead type attached by two screws, you will also need a 300-75 ohm transformer, such as 193983. If your TV has 300-ohm VHF screw terminals, you will need an optional 75-300 ohm transformer, such as AH011.
Optional Accessories AC088 Super Lightweight Tripod Mounting the camcorder on a tripod, such as AC088, will keep the camcorder steady and produce excellent video results. This tripod’s fluid-effect head provides smooth camera pan and tilt. The quickrelease mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section leg design folds down to 26" when not in use. Rubber feet allow for sure footing.
Accessory Order Form Order Form for Camcorder Model Pro846 Description Soft Camcorder Case Super Lightweight Tripod 75-300 Cable Transformer Y-Adapter Synchro Edit Cable Rechargeable Battery Rechargeable Battery AC Battery Charger RF Output Adapter Car Cord Adapter Car Adapter/Charger Audio/Video Input Cable Video Color Control Center Color Enhancement Light Replacement Bulb for Light 300-75 Cable Transformer Shoulder Strap Audio/Video Cable AC Adapter/Charger Replacement Remote DC Cable Part No.
Accessory Order Form Charge your order on your VISA or MasterCard by filling in below USE YOUR CREDIT CARD ® IMPORTANT: Copy complete account number from your VISA card My card expires: IMPORTANT: Copy complete account number from your MasterCard Copy Number above your name on MasterCard s r r TM My card expires: AUTHORIZED SIGNATURE Prices are subject to change without notice. Print or type your name and address clearly. This will be your mailing label.
Accessory Order Form To order accessories, contact your local Dealer. If a dealer is not nearby, you can also follow the directions below to order by telephone or direct-by-mail. United States and Canada Orders To place your order by phone, have your Visa or MasterCard ready and call the tollfree number listed below between 8AM and 8PM Eastern Standard Time. Use this number only to place an order for accessory items listed on this order form.
Trouble Checks Troubles sometimes are caused by simple “faults” that you can easily correct without the help of a service technician by first checking a few basic remedies. Before you call or take your camcorder to an Authorized RCA Compact Camcorder Servicenter, look below for the type of trouble you are experiencing. Then perform the simple checks and adjustments listed for that trouble. Trouble Checks and Adjustments No power • If using battery, it may need to be recharged.
Trouble Checks Trouble Checks and Adjustments Poor auto-focus operation • Make sure FOCUS does not appear in viewfinder. Press FOCUS F and N buttons together to turn on auto focus. See pages 32-33. • Scene is dark. Auto-focus may not work under this condition. See pages 32-33 for details on manual focus. • Lens is smudged, and image appears unfocused. • Viewfinder eyepiece focus is misadjusted. See page 29. Viewfinder displays are out of focus • Try adjusting eyepiece focus control. See page 29.
Specifications General Power requirement: 6VDC Power consumption: 5.3 W (when FOCUS indicator appears in viewfinder) Weight: 1.87 lbs. (without battery pack, lens hood, lens cap, and cassette) Dimensions: 3-11/16" (W) x 4-3/4" (H) x 8-5/16" (D) (94 x 120 x 211mm) Camera Section Scanning: 525 Lines/60 Fields/30 Frames Required Minimum Illumination: 1 lux Lens: F/1.
Customer Assistance and Service You can reach Thomson at the following number: 800-283-6503 (Toll free inside U.S.A.) Our toll-free Camcorder number operates from 8 a.m. to 5 p.m., CST Monday – Friday for U.S. customers only Thomson provides a toll-free telephone number to help you with any problems you may encounter with your camcorder. Many can be diagnosed over the phone, and if necessary, a replacement unit can be shipped to you.
Limited Warranty What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • 90 days for labor charges. • One year for parts. What we will do: During the initial 90 days • Exchange your camcorder with a new or, at our option, a refurbished unit or at your option, repair your camcorder at no cost to you. After the 90 days and within one year • Exchange your camcorder with a new or, at our option, a refurbished unit or at your option, repair your camcorder.
Limited Warranty shipment in case of damage or loss. Include with the shipment: • A copy of your dated bill of sale to verify your unit’s warranty eligibility. • A brief note describing your camcorder problem. • Your name, address and phone number. Return transportation, storage, and handling costs and insurance are your sole responsibility. We accept no liability in case of damage or loss. To receive a replacement unit after we have received your unit: 1.
Index A/V (Audio/Video) DUB Button . . . . . . . . . . . . . . . . . . . .10-11,39 A/V DUB Indicator . . . . . . . . . . . . . . . .30,39 Accessories, Included . . . . . . . . . . . . . . . . .3 Accessories, Optional . . . . . . . . . . . . . .55-61 Accessory Shoe . . . . . . . . . . . . . . . . . . . . . .8 Accessory, Order Form . . . . . . . . . . . .59-61 Adapter/Charger, Using . . . . . . . . . . . . .4,12 AE Shutter Speed Displays . . . . . . . . . .24,30 Alkaline Batteries, Using to Power . . . . . .
Index Microphone . . . . . . . . . . . . . . . . . . . . . . .7,22 NO TAPE Display . . . . . . . . . . . . . . . .30-31 OPEN Lever . . . . . . . . . . . . . . . . . . . . .14,16 Operating Controls, Camcorder . . . . . . . .7-8 Operation, First-Time . . . . . . . . . . . . . . . .3-8 Optional Accessories . . . . . . . . . . . . . .55-61 Order Form, Accessory . . . . . . . . . . . .59-61 Pause Indicator . . . . . . . . . . . . . . . . . . . . .30 PAUSE/RECORD Button . . . . . . . . . . .10-11 . . . . . . . .
Need Assistance? We want to help! U.S. Consumers: Camcorder Exchange Warranty . . . . . .800-283-6503 Customer Service . . . . . . . . . . . . . . . . .800-336-1900 Accessories . . . . . . . . . . . . . . . . . . . . .800-338-0376 Canadian Consumers: English . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0338 French . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0445 If your camcorder needs service, please contact your dealer or the nearest Servicenter from the yellow pages.
