User's Manual

English

Operation and adjustment

1. To change the tilt angle of your display, hold the display ﬁ rmly in place and

loosen the tilt mechanisms using the long Allen key (J) from the hardware kit

(see Fig. 10). Move your display to the desired position, and then re-tighten the

tilt mechanisms. If your display is in the non-tilt position, you will need to push

up gently on the display before you can move it. Do not release the display

until both tilt mechanisms are ﬁ rmly tightened.

2. Periodically clean your mount with a dry cloth. Inspect all screws and hardware

at regular intervals to ensure that no connections have become loose over time.

Re-tighten as needed.

Fig.10