Model Number° Changing Entertainment. Again. www.rca.com Part No.
FCC Statement NOTE: The manufacturer is not responsible for any radio or "IV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority. NOTE: This equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safeguards The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
Safeguards 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, when liquid has been spilled or when objects have fallen into the apparatus, or when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. POWER SOURCE: This TV should be operated only from the type of power source indicated on the marking label.
Safeguards 20. OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 21. OUTDOOR USE: Do not install this TV outdoor. If the TV is exposed to rain, it may result in a fire or an electric shock. If the TV is exposed to direct sunlight, the TV may heat up and cause damage to the TV. 22. VEHICLE: Do not install the TV in a vehicle. Bumping of the vehicle may cause the TV to fall down and cause injury. 23.
Safety Strap To secure TV to stand or Wall, use hardware listed below (Not Supplied) 1. Attach the wall anchor on the stand. 2. Tie the ropes or chains with TV pedestal screws. Ropes or chains should be secure tightly. 3. Fasten the anchor bolts into top wall-mount holes. 4. Attach the wall anchors on the wall strong enough to support the weight of the TV. (Attach to the Wall Stud). 5. Make sure to connect anchor bolts to wall anchors.
Table of Contents 1 .Important to user ...................................................................................... i 2.Important safety precautions ii .................................................................... Safeguards ....................................................................................... Safety Strap ....................................................................................... ii V 3.Table of Contents ..............................................
Installing the Stand/Wall Installing mount specifications the Stand F ....................................................................................... ® @ 1. Lay a cloth or another soft material on a fiat surface to avoid damage to the LCD screen. 2. Put the TV back upward and the LCD screen downward and keep it flat on the table-board. 3.
Wall mount Wail-mounting Bracket Instai|ation LED42A55RS LED47A55RS 200 x 200 200 x 200 Screw Diameter M6 M6 Screw Length(Unit:mm) 25 25 Unit Dimension(Unit:mm) NOTE: Wall mount bracket is not included with TV and mounting may vary depending on brand and size of bracket. Customer instruc ions that came with wall mount for specific information Removing should of wall mount bracket to wall consult bracket mounting on how to mount bracket to wall. TV Stand 1.
Wall mount When Installing the "iV Against a Wail or Enclosed Area Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 45 ° F (5°C) Instand with stand 12_nehes ........ ? 4 inches 6ore 2.375 Leave at least this much space ar Install on the wall inches the set, 12_nches 4 inches 4 inches lOcm _ Leave at least this much space around the set.
TV Front -IV Front ModeINumber LED42A55RS LED4755ARS -@ MENU © INPUT © .................. VOL A -@ 0 VOL Y -@ 0 CH ,_, 0 CH V -@ 0 7......... Jli ............ .... ; -0 C) Note: Touch the silk print area according to the need, the TV will response correctly. 10 No. Component Component Description 1 POWER indicator 2 Remote sensor Receives signals from the remote control. Do not block.
TV Rear TVRear /- ° z < _ >o 2 i w o f @Y-VIDEO I COMPONENT2@PB-- O PR-- AV2 -1 Q L--O I R J SERVICE COAXIAL O _ HDMI 4 @ The cable tie is only used for the power cord. Note: The appearance of LED42A55RS, LED47A55RS for reference only.
Connect to other devices Warning: Before connecting the TV to any other electronic device, unplug the TV and electronic device AC cords from the AC input. Note: Not all following terminals are included on your TV. The actual one refer to "TV Rear". 1. Connect to broadcast antenna or the cable TV To have an optimal picture quality, it is strongly recommended to have an external antenna or a cable TV.
Connect to other devices 3. Connecting Component Devices (DVD, DVR (digital video recorder), Blu-Ray) Component video(Y, Pb, Pr)transmits video as separate Y, Pb, Pr signals. Use this connection for high-definition video signals from a DVD or other equipment. - Connect Component video and audio cables to Component inputs ("PR/CR", "PB/CB", "Y") of your set and the other ends to corresponding component video out connectors on the PVR or DVD.
Connect to other devices 5. Connect to PC =Connect the D= Sub cable to "VGA" on the side of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable to "PC AUDIO "on the side of your set and the other end to "Audio Out" of the sound card on your computer, Note: For some sets "PC AUDIO" share with component. z o ® < < > Computer 6. Connect to headphone - Connect the headphone jack of the TV set.
Installing batteries Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the "+" and "-" signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. F vvv? / i Note: 1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire. 2. Do not mix battery types or combine used batteries with new ones. 3.
Learning about the remote control panel Remote Control Panel Buttons (1) (2) (3) instructions Power On/Off. Power indicator. INPUT: Switch among TV, Video, VGA. Component, HDMI and (4) 0-9 Numbers: For direct channel access. (5) Last: Return to previous channel. (6) J : Select digital channels. (7) PICTURE: Picture Mode selecting. (8) SOUND: Sound Mode selecting. (9) DISPLAY: Display current status information. (10) MUTE: Mute the sound. (11 ) VOLA IV: Volume increase/Volume decrease.
Quick starts Basic Operation Connecting power cord to the TV 1. Connect the power cord to the connector on the back of the TV, if the power cord in accessories. Note:When connecting the power cord to the connector of the TV, make sure the power cord is fully inserted in the place. Bad contact may cause high temperature of the connector and the risk of fire or other damages. 2. Connect the power cord to the AC power outlet. Power ON/OFF 1. Connect the TV to a power outlet.
Quick starts Use [EXIT] button Press the [EXIT] button to exit the OSD menu. Select channels by numbers To select a channel: Press the channel number you would like to go to. For example, to select channel number 120, press buttons 1,2 and 0, respectively and then press [ENTER] to confirm. Use [MENU] button Press the [MENU] button to display the TV OSD menu. Use [LAST] button Press the [LAST] button to return to the previous channel. Use [ENTER] button Press the [ENTER] button to select a particular item.
Using the TV Menu 1 2 3 Press [MENU_ button to display the main menu. Press [A/T] button to select TV item. Press [ I_/ENTER] button to enter TV menu. 4 Press [A/T] 5 press [I_/ENTER_ button to enter or press [4/1_] button to adjust the option. Press the [Menu_ button to close the menu. button to select the option, You can adjust: - Tuner Mode - Select the TV signal source. select Antenna or Cable.
Using the Video Menu 1 2 Press [MENU] button to display the main menu. Press [A/T] button to select Video item. 3 Press [ I_-/ENTER] 4 Press [A/T_ button to enter Video menu. button to select the option, press [t_/ENTER_ button to enter or press [4/1_] button to adjust the option. 5 Press the [Menu] button to close the menu. You can adjust: " Picture Mode - Adjusts the Picture Mode.
Using the Audio Menu _>MFC: To improve the perception of moving images. The weak setting is suitable for most programs is recommended for general viewing, strong settings can further enhance and normal and motion, however on some cases can create a halo effect on edges of moving objects. You may need to switch settings pending the contents your viewing.
Using the Audio Menu 1 Press [MENU] button to display the main menu. 2 Press [A/v] button to select Audio item. 3 Press [ I_/ENTER] 4 Press [A/T] button to select the option, press Ilk/ENTER] button to enter or press [4/1_] 5 button to enter Audio menu. button to adjust the option. Press the [Menu] button to close the menu. You can adjust: - Balance - Adjusts the volume of the left and right speakers. - Surround Sound - Turns the surround sound effect on or off.
Using the Setup Menu 1 Press [MENU] button to display the main menu. 2 3 4 Press [A/T] button to select Setup item. Press [ I_/ENTER] button to enter Setup menu. Press [A/T] button to select the option, press [_/ENTER] button to enter or press E4/_] button to adjust the option. 5 Press the [Menu] button to close the menu. You can adjust: - OSD Language - Use the right or left arrow button to choose the OSD Language among English, Spanish and French.
Using the Setup Menu O Cinema Stretches the 4:3 aspect ratio image vertically and horizontally aspect O to fill the screen at 1:2.35 ratio. Dot to dot Use the function to see the full image without any cutoff, when HDMI (720p/1080i/1080p), Component (1080i/1080p), DTV (1080i) or VGA signals are inputs. " DPMS - This is a good function for a computer control the screen on or off. For example, switched off. If the computer is activated, monitor.
Using the Setup Menu • Caption: There are three items in it - Analog Closed Caption, Digital Closed Caption and Digital Caption Style. This is a function about caption, display caption by anolog signal and display caption by digital signal. Analog Closed Caption: CCl, CC2, CC3, Cc4, TEXT1, TEXT2, TEXT3, TEXT4. Digital Closed Caption: Digital Caption Style: Service1, Service2, Service3, Service4, Service5, Service6. There are two Caption Styles.
Using the Parental Menu 1 Press [MENU] button to display the main menu. 2 Press [A/T] button to select Parental item. 3 Press [ I_/ENTER] 4 Press [A/V] button to select the option, press [I_/ENTER_ button to enter or press [41/1_] 5 When you first use this function, password to highlight an option, option. button to adjust the option. Press the [Menu] button to close the menu. the default is [00001.
Using the Parental Menu Following is the description of these ratings.
Using the parental Menu About Canada (French) Rating Bescription G General 8 ans+ 8+General, 13 ans+ Programming may not be suitable the age of 13 16 ans+ Programming is not be suitable for children under the age of 16 18 ans+ About Canada Not recommended for young children for children under Programming restricted to adults (English) Rating Description C Children C8+ Children eight years and older G General Programming, suitable for all audiences PG Parents Guidance 14+ Viewers
Trouble shooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Customer important notice: If the TV can not be operated, please unplug the power and restart. Possible Solutions Symptoms - Make sure the power cord is plugged in, then press Power (Standby), TV will not turn on , The remote control batteries may be dead. Replace the batteries. = Unplug the VGA wire and plug the power wire again.
Specifications Model LED47A55RS LED42A55RS Screen Diagonal Size Screen Resolution 42 inches 47 inches 1920X1080 Pixels 1920X1080 Pixels 165W 180W Power Consumption WalFmount Wall-mount screws pattern M6X25mm dimension(VESA) 200mm X 200mm 3ize with base(inch)(L (4 pcs) M6X25mm 200mm X 200mm 40.6×11.5×28.1 X WX H) 45×11.2×30.7 44.2 Ibs Weight with base(Ibs) 56.
srs SRS SRS® restores the original three-dimensional sound field of stereo recordings by retrieving spatial information buried in the recordings to create an immersive 3D sound-field using only two speakers or headphones. LBY DiGiTAL Manufactured under license from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. Energy Star qualified TV This product contains electrical or electronic materials.