Model Number. LED42A55RS LED47A55RS Part No.
Important to user FCC Statement NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority. NOTE: This equipment has been tested and found to comply with the limits for a class B digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Important Safety Precautions Safeguards The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
Important Safety Precautions Safeguards 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, when liquid has been spilled or when objects have fallen into the apparatus, or when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.
Important Safety Precautions Safeguards 20. OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 21. OUTDOOR USE: Do not install this TV outdoor. If the TV is exposed to rain, it may result in a fire or an electric shock. If the TV is exposed to direct sunlight, the TV may heat up and cause damage to the TV. 22. VEHICLE: Do not install the TV in a vehicle. Bumping of the vehicle may cause the TV to fall down and cause injury. 23.
Important Safety Precautions Safety Strap v
Table of Contents Table of Contents 1.Important to user...................................................................................... i 2.Important safety precautions.................................................................... Safeguards....................................................................................... Safety Strap....................................................................................... ii ii V 3.Table of Contents.......................................
Setting Up Installing the Stand/Wall mount specifications Installing the Stand 1. Lay a cloth or another soft material on a flat surface to avoid damage to the LCD screen. 2. Put the TV back upward and the LCD screen downward and keep it flat on the table-board. 3. Take out the stand and insert the stand into the installing slot in the lower part of the TV, then put the stand to relevant position of the TV set until all the holes match each other completely. 4.
Setting Up Wall mount LED42A55RS Unit Dimension(Unit:mm) LED47A55RS 200 200 200 200 Screw Diameter M6 M6 Screw Length(Unit:mm) 25 25 8
Setting Up Wall mount Wall mount When Installing the TV Against a Wall or Enclosed Area Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 45° F (5 ) Instand with stand 12 inches 30cm 4 inches 10cm 2.375 inches 6cm Leave at least this much space around the set. Install on the wall 12 inches 30cm 4 inches 10cm 4 inches 10cm Leave at least this much space around the set.
Setting Up TV Front Model Number LED42A55RS LED4755ARS Note:Touch the silk print area according to the need, the TV will response correctly. Blue The light is off when TV is turned on.
Setting Up TV Rear VIDEO AV1 Y R COMPONENT2 PB PR AV2 L R SERVICE COAXIAL HDMI 4 The cable tie is only used for the power cord. HDMI3 HDMI2 HDMI1 Y VIDEO VGA AUDIO L COMPONENT1 PB PR ANT75Ω L OUT R TV Rear Note: The appearance of LED42A55RS,LED47A55RS are similar, the picture above is for reference only.
Setting Up Connect to other devices Warning: Before connecting the TV to any other electronic device, unplug the TV and electronic device AC cords from the AC input. Note: Not all following terminals are included on your TV. The actual one refer to "TV Rear". ANT/CABLE 1. Connect to broadcast antenna or the cable TV To have an optimal picture quality, it is strongly recommended to have an external antenna or a cable TV.
Setting Up Connect to other devices R 3. Connecting Component Devices (DVD, DVR (digital video recorder), Blu-Ray) Component video(Y, Pb, Pr)transmits video as separate Y, Pb, Pr signals. Use this connection for high-definition video signals from a DVD or other equipment. - Connect Component video and audio cables to Component inputs (“PR/CR”, “PB/CB”, “Y”) of your set and the other ends to corresponding component video out connectors on the PVR or DVD.
Setting Up Connect to other devices VGA AUDI O IN 5. Connect to PC - Connect the D- Sub cable to “VGA” on the side of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable to “PC AUDIO ” on the side of your set and the other end to “Audio Out” of the sound card on your computer. Note: For some sets "PC AUDIO" share with component. Computer HEADPHONE 6. Connect to headphone - Connect the headphone jack of the TV set.
Using the Remote Control Installing batteries Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the “+” and “-” signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire. 2. Do not mix battery types or combine used batteries with new ones. 3.
Using the Remote Control Learning about the remote control panel Remote Control Panel Buttons instructions 2 1 (1) Power On/Off. (2) Power indicator. (3) INPUT: Switch among TV, Video, Component, HDMI and VGA. (4) 0-9 Numbers: For direct channel access. (5) Last: Return to previous channel. (6) — : Select digital channels. (7) PICTURE: Picture Mode selecting. (8) SOUND: Sound Mode selecting. (9) DISPLAY: Display current status information. (10) MUTE: Mute the sound.
Using the Remote Control Quick starts Basic Operation Connecting power cord to the TV 1. Connect the power cord to the connector on the back of the TV, if the power cord in accessories. Note:When connecting the power cord to the connector of the TV, make sure the power cord is fully inserted in the place. Bad contact may cause high temperature of the connector and the risk of fire or other damages. 2. Connect the power cord to the AC power outlet. Power ON/OFF 1. Connect the TV to a power outlet.
Using the Remote Control Quick starts Use [EXIT] button Press the [EXIT] button to exit the OSD menu. Select channels by numbers To select a channel: Press the channel number you would like to go to. For example, to select channel number 120, press buttons 1, 2 and 0, respectively and then press [ENTER] to confirm. Use [MENU] button Press the [MENU] button to display the TV OSD menu. Use [LAST] button Press the [LAST] button to return to the previous channel.
Changing the TV Settings Using the TV Menu 19
Changing the TV Settings Using the Video Menu 20
Changing the TV Settings Using the Audio Menu RCA 21
Changing the TV Settings Using the Audio Menu Note: 22
Changing the TV Settings Using the Setup Menu 23
Changing the TV Settings Using the Setup Menu 24
Changing the TV Settings Using the Setup Menu 25
Changing the TV Settings Using the Parental Menu 26
Changing the TV Settings Using the Parental Menu 27
Changing the TV Settings Using the parental Menu 28
Appendix Trouble shooting 29
Appendix Specifications Model LED47A55RS LED42A55RS Screen Diagonal Size 42 inches 47 inches Screen Resolution 1920X1080 Pixels 1920X1080 Pixels Power Consumption 165W 180W M6X25mm (4 pcs) M6X25mm (4 pcs) Wall-mount dimension(VESA) 00mm X 200mm 00mm X 00mm Size with base(inch)(L X WX H) 40.6×11.5×2 .1 45×11.2×30.7 44.2 lbs 56.
