User's Guide

5
Getting Started
Step 7: Pair the RCA SmartView camera with the App
Make sure the RCA SmartView App is open
on your phone or tablet. Also make sure that
your phone or table is connected to your WiFi
network.
Continues on next page...
FPO
The next screen in the App
lets you name the camera
you’re setting up and prompts
you to scan the QR code on
the bottom of the camera.
Add camera
Camera list
In the App’s home screen,
press the Add camera
button at the bottom of the
screen.
NOTE: Make sure your camera is
on! If you haven’t already turned
it on, press the Power button on
the right side of the camera (the
camera’s LED lights up).
FPO
FPO
Add new camera with WiFi
Add Camera
Add new camera with QR code
In the next screen, press
the Add new camera with
WiFi button.
To scan the QR code on
the camera: Find the QR
code on the bottom of
the camera. Position your
smartphone or tablet so
that its camera can scan this
QR code. Then press where
indicated in the App to scan
the QR code on the bottom
of your camera.
To name the camera you’re setting up: Press
in the Camera name eld and enter the name
you want to use.