High-Definition Television User’s Guide Changing Entertainment. Again.
Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury.
Table of Contents Key Features Overview Your TV is equipped with features that will add to your TV viewing experience. The following information summarizes a few of these features. Chapter 3 provides more information about the rest of the TV’s features and how to use them. On-Screen Program Guide The GUIDE Plus+™ system is a “no-fee,” on-screen interactive list of programs and information that is built into your TV.
Table of Contents RECORD OUTPUT Record Output Jacks VIDEO AUDIO R You can record digital TV (and analog) programs by using the RECORD OUTPUT VIDEO OUT and AUDIO OUT L/R (you can also record analog programs). Your TV must be tuned to the channel in order to record the program. L Integrated HDTV Tuner Decodes all 16 formats of ATSC Digital TV broadcasts for a clearer picture without ghosting or snow. Decodes NTSC analog TV broadcasts. For digital TV, can output sound in Dolby Digital 5.
Table of Contents Key Features Overview ................................................................................................................... 1 Chapter 1: Connections & Setup Things to Consider Before You Connect ........................................................................................ 6 Choose Your Connection ................................................................................................................. 7 How to Connect: TV + VCR + DVD Player ................
Table of Contents Chapter 4: Using the TV’s Menu System Menus, On-screen Help, and Control Panels ............................................................................... 54 Navigating the Menu System .................................................................................................................... 54 Exiting a menu ........................................................................................................................................... 54 On-Screen Help ...........
Chapter 1 Connections & Setup Chapter Overview: • Things to Consider Before You Connect • Choose Your Connection • How To Connect • Back of the TV • Why You Should Connect the G-LINK Cable • The Front of Your TV • Plug in the TV • Put Batteries in the Remote • How to Use the Remote Control to Complete the Assisted Setup • Turn on the TV • Complete the Assisted Setup Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Connections & Setup Things to Consider Before You Connect Protect Against Power Surges • Connect all components before you plug any of their power cords into the wall outlet or power strip. NEVER plug your TV into an outlet that is controlled by a wall switch. • Turn off the TV and/or component(s) before you connect or disconnect any cables. • Make sure all antennas and cables are properly grounded. Refer to the Important Safeguards sheet packed with your TV.
Connections & Setup Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. Please use the following chart to determine which connection is best for you. Proceed to the appropriate page and connect your TV. For more information about the relationship between the cables, jacks, and the quality of the signal you see on your TV, go to page 13.
Connections & Setup Note for U.S. Customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. For additional assistance while using your RCA product, please visit www.rca.com/customersupport.
Connections & Setup SATELLITE RECEIVER VIDEO AUDI L S-VIDEO R RE WO P +L OV — LO V HC HC UN EM CABLE TV OR OFF-AIR ANTENNA 3 RIGHT LEFT TV FIXED/VARIABLE AUDIO OUTPUT CENTER CHANNEL INPUT SPEAKER SELECT EXT INT W/ R EXT SURR VIDEO INPUT 1 VIDEO INPUT 2 V V S-VIDEO 2A VCR VIDEO ANTENNA IN L AUDIO TV VIDEO INPUT 3 VIDEO INPUT 4 V PR PB V PR VIDEO INPUT 5 S-VIDEO L/MONO L/MONO L/MONO R R R AUDIO INPUT 1 EXT AMP L EXTERNAL SPEAKERS te elli Sat iver e Rec EXT
Connections & Setup Audio Connections With the audio versatility of your HDTV, you can choose various connection options depending on the type and quality of sound that you want. From good to best sound, choose one of the options or refer to the user’s manual of each component that you are connecting to get the best results. • Connect audio/video receiver (speakers connected to receiver) using the digital audio output jack to your TV (best sound).
Connections & Setup Caution: DO NOT connect your audio/video receiver’s outputs or center channel output to the red and black EXTERNAL SPEAKERS OUTPUT on the TV. Damage to the TV may result.
Connections & Setup How to Connect: TV + Speakers Without A/V Receiver You can connect two external speakers to the TV: one to the RIGHT terminal, and one to the LEFT terminal. 1. If necessary, remove the vinyl covering from the ends of the speaker wire and twist the wire core. 2. Open the lever on the speaker terminal. 3. Insert the wire core into the hole. Be sure to connect the (+) to (+) and (-) to (-). 4. Close the lever. Pull gently on the wire to see that it’s connected securely. 5.
Connections & Setup Explanation of Input Jacks and Cables This section describes the jacks and cables you might use to make connections (cables may be ordered separately by using the order form on page 73). There are several ways to connect components to your TV. Different jacks and cables provide a different level of performance. It’s important to remember the different degrees of picture improvement for comparison.
Connections & Setup Y PB PR Component Jacks Component Video (Y•Pb•Pr) Jacks and Cables The Y•Pb•Pr jacks allow you to connect a component, such as a DVD player. This connection provides excellent picture quality because the video is separated into three signals. To ensure maximum picture quality, use three video-grade cables for the connection. Note: Also, remember to connect the left and right audio cables because the Y•Pb•Pr cables carry only the picture signal, not the sound.
Connections & Setup Back of the TV The diagrams below illustrate jacks found on the back of the TV. When connecting cables, be sure to connect corresponding outputs and inputs (video in to video out, right audio in to right audio out, etc.).
Connections & Setup CENTER CHANNEL INPUT MAXIMUM AMPLIFIER POWER RATING INTERNAL (60 WATTS into 8 OHMS) SPEAKER SOURCE TV CENTER SPEAKER INPUT • EXT AMP TV’s CENTER CHANNEL INPUTS Caution: Do not connect the A/V receiver’s CENTER CHANNEL output to the TV’s EXTERNAL SPEAKERS terminals. Damage to TV may occur. • INTERNAL SPEAKER SOURCE - TV / EXT AMP Switch - TV Position Sound comes from TV’s internal speakers. - EXT AMP Position Internal speakers are used for an external center channel.
Connections & Setup VIDEO INPUT 5 DVI-HDTV L/MONO R AUDIO INPUT 5 VIDEO INPUT 5/AUDIO INPUT 5 Provides DVI-HDTV and analog audio connections. • L/MONO AUDIO provides left audio connection and connector is usually white. • R AUDIO provides right audio connection and connector is usually red. • DVI-HDTV provides a digital video connection from a video source to the TV.
Connections & Setup Why You Should Connect the G-LINK™ Cable The G-LINK cable enables the GUIDE Plus+ system (the on-screen interactive program guide) to work with your VCR and/or cable box. Cable Box – If your TV is connected to a cable box, you must connect the G-LINK cable to receive TV program listings for your area and to tune directly to a channel when the program guide is on your TV screen.
Connections & Setup The Front of Your TV Front Input Jacks The TV has front input jacks for convenience in connecting a camcorder, digital camera, or video game: an S-VIDEO input, one set of composite AUDIO/VIDEO inputs, and a headphone jack. Look for a hinged door and press to open the cover. Please note the illustration below is just an example of how jacks might appear.
Connections & Setup Plug in the TV Plug the flat end of the cable into the power jack on the back of the TV. Then plug the end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do not plug into an outlet controlled by a light switch. The TV needs some power to acquire guide listings, do recordings, etc.
Connections & Setup Tip To access the setup menus manually, press MENU and choose Assisted Setup. Complete the Assisted Setup The menu system in your TV allows the TV’s features to be configured to work properly. On-screen information helps you make the right selections for your setup. The first time you turn on your TV, the Assisted Setup screens appear automatically. Set the Menu Language The first part of the Assisted Setup menu asks you to select your preferred language for the menu system. 1.
Connections & Setup 2. Use the number buttons and/or the arrows on your remote to enter your zip code or postal code. Press OK when you’re finished. Note: If your postal code contains letters, press the up and down arrow buttons on your remote to enter letters, and press the right arrow button to go to the next space. The left arrow button also moves the highlight to the left. Step 2: Configuring for Cable The next series of screens asks you about your cable setup.
Connections & Setup 4. Highlight your brand of cable box, and press OK. If your brand isn’t listed, highlight Not Listed and press OK. Important Note: Cable box may only be connected to ANTENNA A or INPUT 1 if it is to be controlled by GUIDE Plus+ System 5. Make sure your cable box is on. Tune the cable box to channel 02 (use the remote control that came with your cable box, or press the channel buttons on the cable box). Press OK (the GUIDE Plus+ system starts testing codes).
Connections & Setup 2. Use the up and down arrow buttons to highlight the brand of your VCR that is connected to the TV and press OK. If your brand isn’t listed, highlight Not Listed and press OK. 3. Keep the VCR on and insert a tape. When you complete these steps, press OK to begin testing. Important Note: When code testing is in progress, don’t touch your TV, VCR, or any of the remote controls for these products. 4. Look at the front of your VCR.
Connections & Setup What to Expect The next time you turn on your TV, the GUIDE Plus+ system will appear on the screen. The following examples explain what you might see: • If all of the program information has been sent to your TV, the GUIDE Plus+ system appears with all of your TV program listings. • If the program information hasn’t been sent to your TV yet, an outline of the GUIDE Plus+ system (without TV program listings) will appear on the screen.
This page left blank intentionally.
Chapter 2 Using the Remote Control Chapter Overview: • The Buttons on the Remote Control • Programming the Remote to Operate Other Components • How To Use the Remote After You’ve Programmed It • Code List Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Using the Remote Control The Buttons on the Remote Control VCR1 DVD Indicator ON • OFF VCR2 TV AUX SAT • CABLE Blue action Button In the GUIDE Plus+ system, it activates features (located in the Action bar on TV screen). Green action Button In the GUIDE Plus+ system, it activates the features (located in the Action bar on TV screen). FORMAT MUTE VOL VOL CH + (Backlight button) Press to illuminate some of the remote control’s buttons.
Using the Remote Control Tip To turn off most the RCA, GE, and Proscan components that are connected to the TV, press ON•OFF twice within two seconds. This feature only works with most RCA, GE, and Proscan products. GO BACK Returns you to the previous channel or previous screen in the menu system. GUIDE Brings up the Listings screen for the GUIDE Plus+ system. INDICATOR Indicates the programming mode when programming the remote to operate components.
Using the Remote Control VCR1 ON•OFF TV Programming the Remote to Operate Other Components DVD Indicator VOL VOL CH + The universal remote can be programmed to operate many brands of remotecontrollable VCRs, audio components, DVD players, cable boxes, satellite receivers and other components. In addition to being programmed to operate your television, it’s already programmed to operate most RCA, GE, and PROSCAN components.
Using the Remote Control Using Automatic Code Search If Direct Entry does not work for your component, try Auto Code Search. The following instructions can be used to program the remote to operate each of your components. If you want to stop the automatic code search without programming any of your components, press and hold CLEAR until the indicator on the remote turns off. 1. Turn on the component you want to operate (VCR, DVD player, etc.) 2.
Using the Remote Control Using the INPUT Button Input source VCR1 DVD ON • OFF VCR2 Note: Watch the channel banner to see the input sources change each time you press the INPUT button. TV AUX SAT • CABLE FORMAT MUTE 1. Repeatedly press the INPUT button to scroll through the available input sources until you find the input associated with the component (such as VCR or DVD player) you want to view. 2. Once you have found the input source you want, stop pressing INPUT.
Using the Remote Control VCR Codes Programmable for VCR1, VCR2, and AUX buttons. Admiral ........................................................ 2132 Adventura .................................................... 2026 Aiko ............................................................. 2027 Aiwa ............................................................. 2026 Akai ..................... 2003, 2004, 2005, 2007, 2008, ................................................. 2111, 2112, 2113 American High ...........
Using the Remote Control Satellite Receiver Codes Programmable for SAT•CABLE and AUX buttons. Alphastar ................................................................ Chapparal ..................................................... 5056, Dishnet ................................................................... Drake ............................................................ 5058, Echostar .................................................................. GE .............................................
Chapter 3 Using the TV’s Features Chapter Overview: • Channel Banner • Digital or Analog Channels • All About the GUIDE Plus+ System • Parental Controls • Auto Tuning • PIP (Picture-In-Picture) Operation • Web Browser Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Using the TV’s Features About the Channel Banner The Channel Banner appears when you press the TV or INFO button on the remote. If an icon in the channel banner is grayed out (dim), the feature is not available. The following list describes the items on the Channel Banner screen (left to right and top to bottom). Other displays that are not described here are self-explanatory. Note: You may notice the size of the channel banner changes when you change channels.
Using the TV’s Features Digital or Analog TV Channel A single off-air antenna can pick up both analog and digital air channels. Channels can be made up of primary channels and subchannels. Note: Subchannels (sometimes called “minor” channels) are channels associated with the primary channel (sometimes called the “major” channel). Tip: Subchannel (if necessary) Primary Channel VCR1 ON • OFF VCR2 1. Make sure the TV is in TV mode by pressing TV on the remote control. 2.
Using the TV’s Features Video window Action buttons Program information About the GUIDE Plus+ System The GUIDE Plus+ system is a no-fee, on-screen program guide that lists TV schedules for your area and allows your TV direct control of a cable box and/or VCR. You must first set up the GUIDE Plus+ system in order to view this on-screen program guide (see Chapter 1 for details).
Using the TV’s Features Listings The Listings appear each time you enter the GUIDE Plus+ system. They display the current programming for each channel. The current program of Antenna A is displayed in the video window. If you are highlighting a digital channel, the channel label will include a subchannel, such as CBS [8-4].
Using the TV’s Features Locking the Video Window When highlighting the channel names (the left column on the channel listing), the following Action buttons appear: • Lock/Unlock Press the Blue action button to lock or unlock the video window to either stay at one channel as you browse the GUIDE Plus+ system (lock) or change as you browse through different channels (unlock). The PIP button also locks/unlocks the video window.
Using the TV’s Features REGULARLY records the program every day of the week when it appears on the same channel at the same time. OFF turns off timer. Promotions The Promotions menu displays a list of all the promotions available through the GUIDE Plus+ system. Highlight the Promotions menu and then use the down arrow to scroll through the list. When the promotion you want to view is highlighted, press INFO (the promotional information appears on-screen).
Using the TV’s Features Parental Controls Tip You must lock the TV for the parental controls settings to be enforced. The Parental Controls menu allows you to program your TV so that children cannot see certain programs, channels, browser, or use the front panel controls.
Using the TV’s Features For each major channel 0 through 125 found through channel search in Antenna A and B Lists, there are six subchannels (1, 2, 3, 4, 5, and 6 to 999). The subchannels are the same for every major channel and are not based on which subchannels a broadcaster is actually broadcasting. Subchannels are not supported for major channels 126 through 999.
Using the TV’s Features The V-Chip Rating Limit Screen The following is an example of where items are located within the V-Chip TV Rating screen. Rating Status Field Lets you select whether the status of the age-based Rating Field rating limit to the left is Viewable or Blocked. Lets you select from a Content Themes Lists the content themes you can block or view. list of age-based ratings you can block or view.
Using the TV’s Features Blocking Age-Based Ratings You can automatically block all program ratings above a specified age-based rating level. For example, if you only want your child to watch programs that have a TV-G rating and lower (in other words, you want the child to watch TV-G, TV-Y7, and TV-Y), then you need to block out higher ratings. To block programs with higher ratings: 1.
Using the TV’s Features Viewing Specific Content Themes If you block specific content themes, you have the option of going back and changing some of the content themes back to (V) Viewable: Content Themes D Sexually explicit dialogue L Adult language S Sexual situations V Violence FV Fantasy Violence 1. Determine the content themes you want to change to (V) Viewable. 2. Use the up and down arrow buttons to highlight the age-based rating whose content theme you want to change to Viewable 3.
Using the TV’s Features For example, if movies with a rating of PG-13 and higher are blocked, you can change the rating status corresponding with NC-17. Your child would then be able to watch all movies with a G, PG, and NC-17 Rating. 3. Exit the screen, and be sure the TV is locked. V-Chip Unrated Program Block Selecting this option lets you decide if programs that the V-Chip recognizes as “unrated” can be viewed.
Using the TV’s Features Auto Tuning Feature The way you set up the Auto Tuning feature in the TV’s menu corresponds to the component buttons on the remote and the way you have each component connected to your TV. When you set auto tuning, you’re telling the TV what channel to tune to when you press the VCR1, VCR2, DVD, or SAT•CABLE button on the remote control. VCR1 TV 1. Press MENU (the MAIN MENU appears) 2. Highlight Connections and press OK. 3. Highlight Auto Tuning and press OK 4.
Using the TV’s Features PIP (Picture-in-Picture) Operation The PIP (Picture-In-Picture) feature lets you display a second, smaller analog (NTSC format) picture on top of the main analog picture. The main and PIP channels must be from the same antenna A or B; you cannot have the main picture from Antenna A and the PIP picture from Antenna B. However, inputs can use PIP regardless if Antenna A or B is used for the main or PIP picture.
Using the TV’s Features PIP Problems? • If you are channel surfing and the PIP disappears, you may have tuned to a digital channel. To view PIP and the main picture, make sure that both the main and PIP channels are analog inputs, or signals. Continue changing the channel until you find an analog (NTSC format) channel. The PIP window will reappear.
Using the TV’s Features Browser Screen Burn Prevention If the browser is idle for a period of time, a pop-up message appears to remind you to turn it off when you are not using it to prevent uneven wear of the screen. Remember that fixed images tend to “burn” in. In browser mode, the contrast level of your TV is automatically set to a reduced level to help slow the effects of uneven screen aging. Additional steps have been taken to mitigate uneven screen aging on your TV.
This page is intentionally left blank.
Chapter 4 Using the TV’s Menu System Chapter Overview: • Menus and Control Panels • Picture Quality Menu • Audio Menu • Time Menu • Connections Menu • Preferences Menu Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Using the TV’s Menu System Menus, On-screen Help, and Control Panels This section highlights your TV’s on-screen menu system. The menu system has several types of screens. An overview follows. Note: The GUIDE Plus+ Menu, Parental Controls, Web Browser, and 1394 Recording menu items are discussed in the Features chapter while Assisted Setup is discussed in the Connections and Setup Chapter.
Using the TV’s Menu System Sliders Sliders are used to select a specific point of a control that has continuous levels. To make adjustments: 1. Press the left or right arrow to select the slider control for the feature you want to adjust. 2. Press the up or down arrow to adjust the indicator on the vertical slider. Note: Some sliders are positioned horizontally, for example, Translucency, Balance, and Initial Volume.
Using the TV’s Menu System Picture Quality Menu The Picture Quality menu contains menus to configure video settings: Picture Settings, Picture Presets, Auto Color, Color Warmth, Noise Filter, Convergence, SVM, Reset Controls. To access the Picture Quality menu: 1. Press MENU on the remote control (the Main Menu appears). 2. Press the down arrow button on the remote control to highlight Picture Quality, and then press OK or 2.
Using the TV’s Menu System Auto Color Auto Color minimizes the flesh tone variations of the TV picture. The Auto Color setting can be stored for each input. Choose On or Off, depending on your preference. Color Warmth Color Warmth automatically adjusts the color temperature of the picture. Color Warmth can be stored for each input. The feature lets you set one of three automatic color adjustments: • Cool for a more blue palette of picture colors. • Normal for an ordinary picture color.
Using the TV’s Menu System SVM SVM stands for Scan Velocity Modulation. This feature improves the sharpness of the picture by changing the speed of the cathode-ray tubes’ electron beam when it transitions between dark and light areas of the screen. It sharpens the black-towhite edges and white-to-black edges. Choose On or Off, depending on your preference.
Using the TV’s Menu System Audio Processor The Audio Processor displays a choice list of available audio modes, which control the way the sound comes through your speakers. The selected setting affects all inputs and antennas. To create the settings: 1. Press the MENU button to access the main menu. 2. Select Audio, and then Audio Processor. Depending on your speaker setup, any combination of the following options appear: • Mono plays the sound in monophonic audio only.
Using the TV’s Menu System SAP (Second Audio Program) When turned on, Second Audio Program plays the program’s audio in a second language, if one is available. SAP is also used to broadcast a program’s audio with descriptions of the video for the visually impaired. Or, SAP might contain audio which is totally unrelated to the video. Note: SAP is broadcast in mono and is only available for analog programs, not digital programs.
Using the TV’s Menu System Subwoofer The built-in Subwoofer enhances low-frequency audio. The Subwoofer setting can only be changed if the Fixed/Variable audio output is set to the Variable Output. The choices are: Subwoofer On or Subwoofer Off. Time Menu The Time menu lets you set up time-related features such as: Sleep Timer, Wakeup Timer, or Time of Day. Just follow the on-screen help text to assist you in setting up the features–the information is explained in detail.
Using the TV’s Menu System Channel Search Engaging in a channel search tells the TV to search for all the terrestrial TV channels available through the antenna inputs. When the TV finds an active channel, it places it in the channel list. Inactive channels (weak stations or channels with no signal at all) aren’t placed in the channel list. The Channel Search screen lets you choose a Full Search or a Quick Search.
Using the TV’s Menu System Auto Tuning This menu lets you specify the various components you have connected to your TV. It lets you program a component button on the remote control (VCR1, VCR2, DVD, or SAT•CABLE) so that pressing the button automatically turns on the TV and turns the TV to the correct video input channel (see the Features chapter on page 48 for detailed information).
Using the TV’s Menu System Ethernet Setup If you have a NAT (Network Address Translation)/PAT (Port Address Translation) device with DHCP capability, no setup is required. The TV automatically sets itself up for Ethernet use. If you do not have a NAT/PAT router, you may need to establish some settings in conjunction with your ISP (Internet Service Provider) before you can connect to the Internet. Your ISP needs your TV’s MAC (Media Access Control) address to give you a host name.
Using the TV’s Menu System Analog Captions You can select a closed caption mode, which is the mode, or source, used for displaying captioning information for all analog channels. The content of CC and Text are different; you can select which one you want to see on the screen. CC CC displays information at any position on the screen. It overlays the text on top of the picture as it is received. Text Text displays information at one particular position (such as the bottom third) of the screen.
Using the TV’s Menu System Caption Color allows you to choose the font color: White, Black, Red, Green, Blue, Yellow, Magenta, Cyan. Background Color allows you to choose the background color: White, Black, Red, Green, Blue, Yellow, Magenta, Cyan. Background Opacity allows you to change the see-through options: Solid, Transparent, Translucent, and Flashing. Solid is the default setting. Caption Opacity allows you to change the see-through options: Solid, Transparent, Translucent, and Flashing.
Using the TV’s Menu System Record Output 16:9 signals can be recorded in one of two ways: Cropped Recording (Center Cut) and Anamorphic Mode Recording. Cropped Recording records the center of a 16:9 signal and the Anamorphic Mode Recording compresses the 16:9 signal into a 4:3 area. Notes: To make the “clearest” recording, avoid using PIP, GUIDE Plus+ system, browser, or zoom screen format. Doing so will have unwanted effects on the recorded video.
Using the TV’s Menu System Digital Channel Info The Digital Channel Info option allows the TV to receive information about digital TV channels like program titles. The default is set to Acquire Digital Channel Information. Disabling this option should be reserved as a last resort because you may not receive important terrestrial program guide information, such a program ratings, channel names, program titles, program times, etc.
Chapter 5 Reference Chapter Overview: • Troubleshooting • Specifications and Features • Accessory Information • Limited Warranty • Care and Cleaning • Index Changing Entertainment. Again. Graphics contained within this publication are for representation only.
References Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. TV Problems TV won’t turn on • Press the TV button or ON/OFF button while remote is in TV mode and there’s a source of power to the outlet or outlet strip. • Make sure the TV is plugged in. • Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else. • Something might be wrong with your remote control.
References Unusual sound quality • Check the Graphic Equalizer, SRS, and Sound Logic settings. No sound, picture okay • Maybe the sound is muted. Try pressing the volume up button to restore sound. • Maybe the speakers are turned off. Check the FIXED/VARIABLE OUT control panel in the Audio menu. • Check the position of the INT W/EXT SURR and EXT switch on the back of the TV. • Make sure the correct Audio Processor mode (Mono, Stereo, SRS, FOCUS and TruSurround) is selected.
References GUIDE Plus+ System Problems GUIDE Plus+ setup won’t turn off tape for VCR setup and/or channel 02 cable box • Check to see if the G-LINK wands are positioned correctly in front of components’ remote sensors. • GUIDE Plus+ system control of cable box is slower than direct control of the box itself. Keep this in mind when changing channels. • You may have an incorrect GUIDE Plus+ channel lineup. The guide may get out of sync with the cable provider.
References The Remote Control Doesn’t Work • Something might be between the remote and the remote sensor on the component. Make sure there is a clear path. • Maybe the remote isn’t aimed directly at the component (TV or VCR) that you’re trying to operate. • Maybe remote is not in TV Mode. Press the TV button so the remote controls the TV. • Maybe batteries in remote are weak, dead, or installed incorrectly.
References HDTV Specifications** Tuning Capability Channel Tuning ........................................................................ NTSC/ATSC Digital Cable Compatibility ..................................................... DTVLINK, DVI/HDTV, .................................................................................................. Component Video Adaptive Video Noise Reduction ............................................ Yes Adjustable Color Warmth ........................................
References Parental Control with V-Chip ........................................ Yes Picture Reset ................................................................... Yes, in Menu Picture-in-Picture (PIP) ................................................... Analog on Analog Picture Memory Presets for Video Inputs ..................... Yes (Individual Memory) GUIDE Plus+ system with Digital Channels ................... Yes One Touch VCR Record w/GUIDE Plus+ system ............
References Accessory Information The following accessories are available from most dealers and electronics supply stores in case you want to position your components farther apart or need additional cables. Monaural VCR Dubbing Audio/Video Cable is a double cable that lets you connect the video and audio jacks of two VHS VCRs to duplicate tapes. It can also be used to connect a VCR to your TV. The cable is color-coded and shielded. It has RCA-type phono plugs on each end.
References VC R1 ON • OF F DV D TV VC R2 AU X MU TE SAT • CA BL E FO VO L CH RM AT + VO L 1 CL 4 PIP SW AP EA R Accessory Order Form Remote Control This is the remote control that came packed with your TV. Replacements or spares can be ordered as needed. AU SE CH Qty Total Price $3.95 Description Screw-on antenna cable* (3-ft) Part No. VH81 Screw-on antenna cable* (6-ft) VH82 $4.95 Push-on antenna cable* (6-ft) VH89 $5.95 RG-6 Weatherproof “F” Cable D905 $5.
References Placing an Order Charge your order on your VISA, MasterCard, or Discover Card by filling in below To place your order by phone, have your Visa, MasterCard or Discover Card ready and call the toll-free number listed below. USE YOUR CREDIT CARD ® IMPORTANT: Copy complete account number from your VISA card Use this number only to place an order for accessory items listed on this order form.
References Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year from date of purchase for labor. • One year from date of purchase for parts. • Two years from date of purchase for the picture tube. The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first. What we will do: • • Pay an Authorized Service Center the labor charges to repair your unit.
References Product Registration: • Please complete and mail the Product Registration Card with your unit. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. Limitation of Warranty: • • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED.
References FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
References Care and Cleaning CAUTION: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder.
This page left blank intentionally.
This page left blank intentionally.
This page left blank intentionally.
This page left blank intentionally.
This page left blank intentionally.
This page left blank intentionally.
Index Index Symbols 1394 Jacks 17 16:9 icon 36 A Accessories 76 Action buttons 28, 55 GUIDE Plus+ system 39 Age-based rating 44 Blocking 45 Viewing 45 Amplifier 6 Analog captions 65 Analog TV channel 37 ANTENNA A 8, 9, 14 ANTENNA A INPUT 17 ANTENNA B 8, 9, 14, 17 ANTENNA button 28 Antenna Info 61 Arrow buttons 28, 49 Assisted setup 20, 21 AUDIO L/MONO 16 Audio codes 34 Audio format icon 36 AUDIO INPUT 3/VIDEO INPUT 3 16 AUDIO INPUT 5 / VIDEO INPUT 5 17 AUDIO INPUT 1/VIDEO INPUT 1 16 Audio language 59 Au
Index Cleaning and care 82 CLEAR button 28 Closed captioning 36, 64, 65 Coaxial cable 7 Codes Audio 34 Cable box 33 DVD 34 Satellite receiver 34 VCR 33 Color 56 Warmth 57 Color scheme 67 Color warmth 56 Component video cables 7 Components, connecting 7 Composite jacks 14 Connection DVD player, TV, VCR 8 Illustrations 6 Satellite Receiver, TV, VCR 9 TV, Satellite Receiver, VCR 9 TV, VCR, DVD Player 8 VCR, TV, DVD player 8 VCR, TV, Satellite Receiver 9 Connections Audio/video receiver 10 Center channel 10
Index EXTERNAL SPEAKERS 11, 12 Input 13 RF 14 S-VIDEO 14 S-Video 16 Y•Pb•Pr 14 O K OK button 19, 29 On-screen help 54 On-screen help text 54 Optical cable 13 Order form Keyboard, optional 50 Output Accessory 77 RECORD 17 L OUTPUTS Audio 15 Language Audio 59 Menu 21, 67 Languages, selecting 21 LED, front panel 20, 70 Limited warranty 79 Listings, GUIDE Plus+ system 39 Locating remote sensor 18 M Main Menu 54 Menu Audio 58 Exiting 54 Picture Quality 56 Preferences 64 Time 61 MENU button 19, 29, 54
Index SAT CABLE button 29, 33 Satellite receiver codes 34 Satelllite receiver connection 9 Scan velocity modulation 58 Schedule menu 40 Screen, Format 66 Search Automatic code 31 Channel 21, 62 Full 21, 62 Quick 62 Second audio program 60 Service, authorized 8 Setup Ethernet 64 GUIDE Plus+ system menus 21 Setup, assisted 20 Setup menu 41 Sharpness 56 Signal source 62 Signal type 62 SKIP button 29 Sliders 55 Software ungrade 62 Sort menu, GUIDE Plus+ system 40 Sound logic 59 Speaker Center input 16 Speake
Visit the RCA website at www.rca.com Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. Thomson Inc. 10330 North Meridian Street Indianapolis, IN 46290 ©2003 Thomson Inc.
