DVD/VCR User’s Guide Changing Entertainment. Again. 16166400.
Important Information This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
Important Information CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Note: This DVD/VCR player is designed and manufactured to respond to the Region Management Information.
This page intentionally left blank. 16166400.
Table of Contents Chapter 1: Connections and Setup Things to Consider Before You Connect ....................................................................... 5 Protect Against Power Surges ........................................................................... Protect Components from Overheating ........................................................... Position Cables Properly to Avoid Audio Interference .................................... Connection Pictures ......................................
Table of Contents Search Options ............................................................................................................. 18 Picture Scan ...................................................................................................... 18 Freeze Frame and Frame Advance .................................................................. 18 Slow Motion (in Freeze Frame Mode) ............................................................ 19 Playback Options .............................
Table of Contents Recording Features ...................................................................................................... 30 Instant Timer Recording (ITR) .......................................................................... 30 Timer Recording ............................................................................................... 31 Time Counter ................................................................................................................ 32 Info Display ...
Table of Contents Progressive Scan ............................................................................................... 44 Sound Menu.................................................................................................................. 44 Sound Logic ...................................................................................................... 44 Digital Output ..................................................................................................
Chapter 1: Connections and Setup Things to Consider Before You Connect Protect Against Power Surges • Connect all components before you plug any of their power cords into the wall outlet. • Turn off the TV and/or components before you connect or disconnect any cables. • Make sure all antennas and cables are properly grounded. Refer to the Important Safeguards sheet packed with your DVD/VCR. Protect Components from Overheating • Don’t block ventilation holes on any of the components.
Connections and Setup Compatible Discs This DVD player is capable of playing the following types of discs: DVDs, audio CDs, Video CDs, CDs with mp3 files, WMA files (Windows Media Audio), and CDs with JPEG files on them . Before you put a disc in the player, make sure it is compatible. You can’t play the following types of discs: Laserdiscs, CD-I, CD-ROM (computer-only discs), DVD-ROM, discs recorded using other broadcast standards (i.e. PAL or SECAM), or CD-G discs.
Connections and Setup TV (BACK PANEL) TV ANT IN S-VIDEO IN COMPONENT VIDEO Y DVD/VCR PLAYER 2 ANT. IN 1 Pr VCR IN LINE1 VIDEO IN L DVD/VCR COMPONENT AUDIO VIDEOOUT OUT OUT DIGITAL AUDIO OUT S-VIDEO OUT VCR AUDIO IN R 4B 3 4A RF OUT / DVD Pb OPTICAL CABLE OR OFF-AIR SIGNAL Note: For a more detailed explanation of the jacks on the back of the DVD/VCR, go to page 55. DVD/VCR + TV 1.
Connections and Setup DVD/VCR + TV + Audio Receiver Both Dolby Digital® and DTS® are audio formats used to record 5.1-channel audio signals onto the digital track of film (while the film is being made). Both of these formats provide up to six separate channels: left, right, center, left rear, right rear, and common subwoofer. The disc will play 5.1-channel sound only if you’ve connected a DTS or Dolby Digital receiver or decoder and if the disc is encoded in the Dolby Digital or DTS format.
Connections and Setup Install Batteries in the Remote 1. Remove the battery compartment cover on the back of the remote. 2. Insert new batteries. Match the polarities (+ and –) on the batteries with the diagram on the remote. 3. Put the battery compartment cover back on the remote. Important Battery Information • If you’re not going to use the remote for a month or more, be sure to remove the batteries because they can leak and cause damage.
Connections and Setup Using the Remote Control to Choose On-screen Menu Items Press the MENU button to bring up the Main Menu. To select an on-screen item, press the number button on the remote control that matches the on-screen number. Selecting a menu item can take you to another menu, activate a choice, or activate a data entry field (such as the hour field in the CLOCK menu).
Connections and Setup Auto Channel Search AUTO CHANNEL SET TUNING BAND: TV CH. ADD/DEL: CH. 2 ADD SOURCE SELECT: TUNER SELECT ADJUST TO EXIT PRESS Before you can watch channels through the VCR, you must set the type of signal you have (cable or TV) and search for all available channels. 1. Press MENU to display the VCR Main Menu. 2. Press the down arrow button until TUNING is highlighted, and press OK (the Tuning menu appears). 3.
Connections and Setup • If you choose AUTO, the VCR sets the time zone using information from the broadcast signal. 6. When finished, press MENU to exit. 7. Turn off the VCR to automatically set the clock. MONTH : JULY DAY : 5 SAT YEAR : 2003 TIME : 2 : 15 AM AUTO CLOCK SET : OFF DAYLIGHT SAVING: ON TIME ZONE: EASTERN SELECT ADJUST TO EXIT PRESS Manual Clock Set 1. Press MENU to display the VCR Main Menu. 2. CLOCK should already be highlighted, so press OK (the Clock menu appears). 3.
Connections and Setup Next Steps This chapter is dedicated to connecting your DVD/VCR player. Before you start playing discs, you might want to get familiar with the remote control — Chapter 2 has details. If you want to skip straight to playing discs, go to Chapter 3 (page 17). It explains playback features of DVDs, Audio CDs, Video CDs, discs that contain MP3 files. The VCR features are described in Chapter 4, including how to record and set up the VCR (page 29).
Chapter 2: Using the Remote Control Button Descriptions for DVD and VCR Modes In addition to operating your DVD/VCR, the remote that came with it will operate most RCA, GE, and Proscan TVs. However, this section only describes the buttons on the remote that you will use with your DVD/VCR. For descriptions of remote control buttons to be used with your TV (RCA, GE, and Proscan only), go to the next page.
Using the Remote Control LOCK Locks the buttons on the front of the unit. MENU Displays the on-screen menu system. (To see the VCR Main menu, press VCR and then MENU. To see the DVD Main menu, press DVD and then MENU). OK Selects the setting or menu that is highlighted. ON•OFF Turns DVD/VCR on or off. OPEN•CLOSE In DVD mode, opens and closes disc tray. In VCR mode, ejects a tape. PAUSE Pauses playback or recording modes (in VCR mode). Press PAUSE again to return to active playback or recording.
Using the Remote Control MUTE Lowers the volume to minimum level. Press again to restore volume. ON•OFF Turns off a compatible RCA, GE, or Proscan TV. TV Turns on a compatible RCA, GE, or Proscan TV and puts the remote in TV mode. VOL +/- Decreases and increases volume level. Using the INPUT Button Use the INPUT button to scroll through the available Video Input Channels (LINE1 and LINE2) and regular broadcast signals.
Chapter 3: Playing Discs Regional Coding Both the DVD/VCR and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This player’s code is region 1. DVD+Rewritable ALL means all regions. Other regions are: 2: Europe, the Middle East, Rep. of South Africa, Japan - 3: Southeast Asia,Taiwan - 4: Central America, South America, Australia, Mexico, New Zealand - 5: Russian Federation, Africa (except Egypt and Rep.
CC Playing Discs To Load and Play a DVD Disc 'tt CCaattcchh UU pp an Turn on the TV and your DVD/VCR (press ON•OFF on the remote or press the Power button on the DVD/VCR). 1. If necessary, tune the TV to its Video Input Channel (if you need more information, go to page 62). 2. Press the OPEN•CLOSE button (the disc tray opens). 3. Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).
Playing Discs Slow Motion (in Freeze Frame Mode) While a disc is playing, press PAUSE. Press REVERSE or FORWARD (each time you press REVERSE or FORWARD the slow motion will get even slower until you reach the slowest speed). To resume normal playback, press PLAY. Playback Options Many of your DVD/VCR’s playback features are accessed through the Info Display (described on pages 20 through 26). Additionally, with some discs you can access playback features directly from the remote control.
Playing Discs Using the On-Screen Info Display The Info Display appears across the top of the screen when you press the INFO button on the remote while you’re playing a disc. Use the left and right arrow buttons to highlight different icons. Once an icon is highlighted, follow the on-screen instructions, and use the up and down buttons on the remote to scroll through the options. You can only access the Info Display when you’re playing a disc.
Playing Discs How to Navigate the Info Display To access the Info Display, press the INFO button on the remote while you’re playing a disc. Arrow buttons Use the left and right arrow buttons on the remote to highlight different icons. Once an icon is highlighted, follow the on-screen instructions, and use the up or down arrow buttons to scroll through options. OK button Time Display (all Info Displays) Hour Seconds Minutes This feature displays the time that has elapsed during playback.
Playing Discs Subtitles Icon (DVD Info Display) By default, subtitles are off. To turn subtitles on: Highlight the Subtitle icon, and press the up or down arrow buttons to scroll through the available subtitle languages (the subtitle language options appear in the box at the bottom of the Info Display), then press OK. Notes: Changing the subtitle language with the Info Display will only affect the disc you are currently playing.
Playing Discs Play Mode Icon (DVD, CD Info Displays) The Play Mode options available depend upon the type of disc you’re playing. The default play mode (standard play) plays the disc’s contents in the order in which the disc was created (i.e., track 1 plays first, followed by track 2, etc.). Play Mode Options Repeat: DVDs, Audio CDs, VCDs and mp3s. Random Play: Audio CDs and mp3s (tracks play in random order).
Playing Discs AB Repeat AB Repeat lets you define a specific segment on the disc that you want to repeat. For example, you might want to watch the dogfight in the movie Top Gun. To watch this scene over and over: 1. With the Play Mode icon highlighted, press the up or down arrow button until Repeat Mode: AB appears. Press OK to set A point appears at the bottom of the Info Display. Press OK when the disc gets to the beginning point of the segment (the A point) that you want to repeat. 2.
Playing Discs Bookmark Icon (DVD Info Display) The Bookmark feature lets you mark a point on the disc so that when you turn the player off and back on (without having ejected the disc), you can quickly start playing the disc from a bookmarked point. Creating a Bookmark 1. Highlight the Bookmark icon on the Info Display. Press OK (the Bookmark Banner appears). 2. Highlight an unused bookmark.
Playing Discs Clearing a Bookmark The bookmarks are erased each time you remove a disc from the player and/or when the power is turned off. 1. While you’re playing a disc, press the INFO button on the remote (the Info Display appears). 2. Press the right arrow button to highlight the Bookmark icon, and press OK (the Bookmark Banner appears). Trashcan icon 3.
Playing Discs Playing mp3 and WMA music files and displaying JPEG files mp3 is an audio file format which compresses recorded music. It was developed by Fraunhofer Gesellschaft in collaboration with Thomson Inc. The main advantage of the mp3 format is that it means CD-quality music tracks can be stored on a personal computer in user-friendly, compressed files. WMA (Windows Media Audio) is another audio file format developed by Microsoft. JPEG files are image files.
Playing Discs 6. Press the INFO button to display the Info menu during playback. • mp3 file: press the AUDIO or PLAY MODE button several times to select a playback mode (standard, program, random, repeat). • JPEG file: press the down arrow button to select a projection speed. 7. When the player has played all the files the music or slide show stops and the disc’s contents appear. 8. Press STOP to end playback.
Chapter 4: VCR Features VCR Basics Once your initial settings are complete, you can begin using your DVD/VCR. In order to begin, you must first understand some basic concepts. Playing a tape 1. Tune the TV to your DVD/VCR viewing channel (03, 04, or the Video Input Channel). 2. Insert a tape in the DVD/VCR. • Press FORWARD or REVERSE to cue the tape to the desired position during Play mode.
VCR Features Recording Features Your DVD/VCR provides many ways to record programming. Basic recording is explained in detail on page 29. The following recording techniques are also available. • Recording – lets you press one button to record a program. • Instant Timer Recording (ITR) – allows recording to start while a program is being watched. This feature automatically stops recording after a designated period of time.
VCR Features Timer Recording You can set up to 8 different TV programs to be recorded. Before a Timer Recording will work, the VCR needs to be set up correctly. • DVD/VCR’s clock must be set correctly. • The timer indicator appears in the display when you turn off the DVD/VCR and a timer recording has been set. The tape indicator flashes if there is no tape in the DVD/VCR when a timer recording has been set and the unit is turned off.
VCR Features Reviewing and Clearing Programs CLOCK To review programs that you have already set up: PROGRAM 1. Press the MENU button to display the VCR Main Menu. TUNING 2. Press the down arrow button until PROGRAM is highlighted, and press OK (the Program menu appears). SETUP SELECT ENTER PROGRAM 1 TO EXIT PRESS MONTH : JULY DAY : 6 FRI START : 6:00 PM STOP : 7:30 PM CHANNEL : 4 TV SPEED : SP REPEAT : ONCE TO ERASE PRESS TO EXIT PRESS 3.
VCR Features 1 STOP SP CH2 Info Display To find out the status of the DVD/VCR, press the INFO button on the remote control. Each time you press INFO, different information appears on the screen. See the following examples. Note: The date and time must be set before they can be displayed. May 20, TUE 6:14PM On-screen display (times out) 1. Press the INFO button to show the on-screen displays. The time counter is displayed in the DVD/VCR’s front panel for a short time. 2.
VCR Features Index Search The VCR has a VHS Index Search System that automatically records index marks on the tape every time you start a recording. During playback you can locate the program you want to play by the number of index marks or by scanning. The VCR will search forward or reverse from the location you are at on the tape. To Activate Index Search: 1. While playing back, press the STOP button to stop the tape. 2.
VCR Features Explanation of the VCR Menu System CLOCK The on-screen menus you set up the first time you turned on your DVD/VCR were explained in Chaper 1. This chaper lists other menus that you can access through the VCR Main Menu (press VCR and then MENU on the remote control).
VCR Features Tuning Menu AUTO CHANNEL SET TUNING BAND: TV CH. ADD/DEL: CH. 2 ADD SOURCE SELECT: TUNER SELECT ADJUST TO EXIT PRESS The Auto Channel Search procedure is explained in detail on page 11. To add or delete channels from the VCR channel list: 1. Press MENU to display the VCR Main Menu. 2. Press the down arrow button until TUNING is highlighted, and press OK (the TUNING menu appears). 3. Press the down arrow button until CH.
VCR Features Broadcast Type You can select the type of audio signal the DVD/VCR receives and records. Choose from STEREO, SAP, and MONO. Press the right arrow button to choose the desired setting. STEREO is used for normal or stereo broadcast recording. MONO is used if the signal is weak or the sound is too noisy. SAP is used to record a Second Audio Program, such as a bilingual program. Audio Output You can set how the audio is ouput to your TV.
Chapter 5: DVD Menu System The DVD Player Menu System The DVD player menu system is not the same as the disc menu or the Info Display. The DVD player menu comes up when there is no disc playing. If you are playing a disc, press STOP on the remote control to stop playback and bring up the DVD player menu. If a screensaver is on the screen, press STOP or CLEAR. (Remember that you have to put the remote in DVD mode by pressing the DVD button if it’s in VCR mode.
DVD Menu System Note: When a track is selected for more than two seconds, the first few seconds of the track plays. 1c. mp3 CD: select a folder using the and buttons, then press the button to access the list of files, then select a file using the and buttons. Note: When an mp3 file is selected for more than two seconds, the first few seconds of the track plays. 2. Press OK to add the title, chapter (DVD), track (audio CD) or file (mp3) selected, to the list.
DVD Menu System Unlocking your DVD/VCR 1. If you’re playing a disc, press STOP (the DVD Player’s main menu appears). 2. Press the down arrow button until Parental Control is highlighted, and press OK (the Enter Password screen appears). 3. Use the number buttons to enter the password you created, and press OK (the Parental Control menu items appear). 4. Press the down arrow button until Unlock is highlighted, and press OK.
DVD Menu System Explanation of Rating Limits The Rating Limits feature lets you determine what types of discs can be played in the player, and what types of discs will require a password to override the rating limit that you’ve set. In the U.S., the ratings feature is based on the ratings set up by the MPAA (Motion Pictures Association of America) such as R, PG, G, etc.
DVD Menu System To Set Ratings for Unrated Titles: Some discs contain titles that don’t have a rating assigned to them. Sometimes, movies you might find the most explicit are unrated. You can restrict access by requiring a password for unrated titles. 1. From the main menu, highlight Parental Control and press OK (enter your password if asked). 2. Highlight Unrated Titles and press OK (another screen appears). 3. Press the down arrow button to highlight Password Required, and press OK.
DVD Menu System Display Menu The Display menu contains the settings that affect how a disc’s content looks on your TV and the brightness of the display that’s on the front of the DVD/VCR. TV Image The TV Image menu adjusts the way a movie appears on your TV. Standard TVs are 4 x 3 format. Depending on the type of television you have, you may want to adjust the screen setting (also called the aspect ratio). 1. With the player on (no disc playing), press MENU (the main menu appears).
DVD Menu System 16 x 9 Widescreen – Choose this setting if your DVD Player is connected to a widescreen TV. If you choose this setting and you don’t have a widescreen TV, the images on the screen might appear distorted due to vertical compression. If you play a disc recorded in 4 x 3 format on a widescreen TV, the left and right sides of the screen will appear black. Progressive Scan You can change how the video signal is output to your TV as either progressive scan or interlaced. 1.
DVD Menu System Digital Output If you connected your DVD/VCR to a receiver via the Digital Audio Out jacks (COAXIAL or OPTICAL) on the back of the player, choose both Dolby Digital and DTS settings. 1. If the main menu isn’t on the screen, press the STOP button (the main menu appears). 2. Use the up and down arrow buttons to highlight Sound. Press OK. 3. Highlight the Digital Output menu. Press OK (the options appear). 4. Highlight your selection. Press OK to select. 5.
DVD Menu System Notes: Discs are created differently. The DVD player can’t override some language preferences. If a disc’s software was created to play the movie (title) in a preferred language, the preference you set might be ignored. Also, if the language isn’t available on the movie you’re playing, the disc’s default language will be chosen. You must turn on the Subtitle feature in order for them to appear when you’re playing a disc.
Chapter 6: Additional Information Troubleshooting Most problems you encounter with your product can be corrected by consulting the following troubleshooting list. Note: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. For additional assistance while using your RCA product, please visit www.rca.
Additional Information Remote control won’t work • You might be in the wrong mode. To operate the DVD functions of your DVD/VCR, press DVD on the remote before you press any other buttons. To operate the VCR, press the VCR button first. If you’re operating the TV, press the TV button first, etc. (this remote operates most RCA, GE, and Proscan TVs). • Check battery installation—the direction on the + and - on the batteries must match the information in the battery compartment cover.
Additional Information The picture is distorted • The disc might be damaged. Try another disc. Picture is distorted during forward and reverse scan • It is normal for some distortion to appear while scanning. A screen saver appears on the TV • Your player is equipped with a screen saver that appears on the TV after your player has been idle for several minutes. To make it disappear, press STOP or CLEAR on the remote.
Additional Information General VCR Problems No power • Make sure the DVD/VCR is plugged into a working outlet. • Make sure connections between devices are correct and snug. There’s poor quality or no picture for normal TV viewing • If using RF coaxial cables to connect the DVD/VCR to the TV, make sure the VCR indicator is not displayed on the DVD/VCR’s front panel (press the remote control’s TV/VCR button to toggle between VCR and TV-viewing modes).
Additional Information The DVD/VCR makes noise when it is stopped • This is normal. The DVD/VCR removes the tape from the playheads when stopping. The cylinders inside the unit will continue to rotate for a few minutes after stopping. The DVD/VCR won’t find active channels correctly using the Auto Channel Search feature • Make sure all cable connections are secure and correct. • Make sure that TUNING BAND: is set correctly in the TUNING menu.
Additional Information • If you are using A/V cables, make sure the TV is set to the Video Input Channel. Go to page 62 for instructions. • If you are not using A/V cables, make sure the DVD/VCR is not in Video Input Channel mode. Press INPUT on the remote control to return to normal viewing. • Try another tape. • Some snow/streaks are normal during search, stop action, frame advance, and slow-motion playback.
Additional Information • You must connect the DVD/VCR to the TV using A/V cables (not provided) to hear true stereo sound during playback. Go to page 7 for instructions. The stereo Audio is too noisy • The stereo signal is weak. Set the BROADCAST TYPE: to MONO. • Press either the CHANNEL – or + button on the front of the unit (or CH +/- on the remote) to minimize picture noise.
Additional Information Handling Cautions • Before connecting other components to this player, be sure to turn all components off. • Don’t move the player while a disc is being played. The disc may get scratched or broken, and the player’s internal parts may be damaged. • Don’t put any container filled with liquid or any small metal objects on the player. • Be careful not to put your hand into the disc tray. • Don’t place anything other than the disc in the disc tray.
Additional Information Back of the DVD/VCR When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right Audio to Right Audio, etc. A description of each jack follows. VCR IN LINE1 ANT.
Additional Information Description of Jacks (continued) OPTICAL - connect an optical cable (SPDIF) to the OPTICAL jack on the DVD/VCR and Digital Audio Optical Input jack on your receiver. COAXIAL - connect digital cable to this jack and to the Digital Audio Coaxial Input jack on your receiver. The cable is not a black coaxial cable, but an RCA-type cable.
Additional Information 1 2 3 4 5 7 6 DVD VCR REC PM TV 8 9 10 Front Panel Display 1. DVD — The DVD mode is selected. 2. Disc icon — A disc is loaded. Flashes when no disc is loaded. 3. Number display — The current time, counter, remaining time on a video tape, time expired on a disc, or the current DVD/VCR status (PLAY, REC, etc.). 4. Repeat icon — The repeat mode is selected. 5. Timer icon — A timer recording is programmed or in progress. 6. Tape icon — A tape is loaded.
Additional Information Explanation of Input Jacks and Cables This section describes the jacks and cables you can use to make connections (only audio/video cables are packed with your DVD/VCR — you can purchase cables by calling 1-800-338-0376, details are on page 63, or order online at www.rca.com, or go to your local electronics store). There are several ways to connect your DVD/VCR to your TV depending upon the cables you have and the jacks that are on the back of your TV.
Additional Information FCC Declaration of Conformity and Industry Canada Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name: Model: Equipment Classification: RCA DRC6100N TV Interface Device Responsible Party: Thomson Inc. 10330 N. Meridian St.
Additional Information Limited Warranty What your warranty covers: • Defect in materials or workmanship. For how long after your purchase: • 90 days from date of purchase - Unit exchange, which includes parts and labor. • 91 days to 1 year from date of purchase - Unit exchange, which includes parts only; you pay the labor. • The warranty for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.
Additional Information What your warranty does not cover: • Acts of nature, such as but not limited to lightning damage. • Adjustment of customer controls. • Damage from misuse or neglect. • A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes. • Batteries. • Units purchased or serviced outside the U.S.A. • Shipping damage if the unit was not packed and shipped in the manner prescribed by Thomson.
Additional Information How to find your TV’s Video Input Channel In order to see what’s playing on your DVD/VCR, you need to tune the TV to the Video Input Channel that corresponds to the jacks you used to hook up the unit to the TV. The Video Input Channel(s) varies for different brands and different models of TVs. Below are some things to try. • Consult the Owner’s Manual that came with your TV.
Accessories VH81 (3-ft) Description Screw-on antenna cable (3-ft) VH82 (6-ft) Screw-on antenna cable (6-ft) VH82 $4.95 Push-on antenna cable (6-ft) VH89 $5.95 Monaural VCR Dubbing Cable (6-ft) VH83 $5.95 Stereo VCR Dubbing Cable (6-ft) VH84 $9.95 Component Video Cables (6-ft) (not shown) DT6DC $24.95 Component Video Cables (12-ft) (not shown) DT12DC $34.95 S-Video Cable (6-ft) VH976 $7.95 S-Video Cable (12-ft) VH913 $14.95 2-way Signal Splitter VH47 $3.
Visit the RCA website at www.rca.com Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. Thomson Inc. 10330 North Meridian Street Indianapolis, IN 46290 ©2003 Thomson Inc. Trademark(s)® Registered Marca(s) Registrada(s) Printed in Indonesia TOCOM 16166400 16166400.
