Installation guide

96 Installation / Dish Assembly
NOTE: In most installations, the other end of the telephone cable will be
hardwired to a junction box. If you must install a modular connector on the
other end of the cable, the orientation of the wire in the connector is different.
Oriented this cable as shown in figure 81.
Spring Clip
MODULAR
CABLE
Figure 81, Installing a Modular Plug On a Modular Line Cord
4. With the wire positioned correctly in the modular connector, use a modular
connector crimping tool the seat the connector on the wire.
Clip
MODULAR
CABLE
Figure 82, Crimping the Plug With the Crimp Tool
Wall Plate installation
To install the wall plate, follow the instructions that accompanies the plate you
purchased. Remember to follow the color code included in the wall plate
instructions.
5. Seal all entry points of the cable into the home and check to be sure it is secured
and hidden from view where possible.