Manualshelf

Installation guide

ManualsBrandsRCA ManualsVideo EquipmentOfficial RCA digital satellite system
81828384858687888990
Installation / Dish Assembly 87
LNB
CABLE
LNB
CONNECTOR
Figure 71, Connecting LNB Cable To LNB
2. Install an F-type connector on the end of the cable. If the cable already has a
connector on it, disregard this step.
3. Thread the coax cable onto the LNB connector.
4. If the connector is not weatherproof, seal it.
5. Slide the end of the LNB into the rectangular opening of the LNB support ann.
Position the LNB to align it with the hole in the support arm.
6. Insert in the LNB bolt into the hole on the bottom side of the LNB support arm.
7. Place the washer on the LNB nut and insert the nut into the hole on the top side
of the LNB support arm.
8. Tighten the bolt with a Phillips head screwdriver.
NUT
BOLT
Figure 72, Attaching LNB