Installation guide

122 Appendix A / Finding DSS Azimuth and Elevations
3. Press DSS on the receiver's remote control.
4. Press MENU on the remote control to bring up the Main menu.
Note: Each of the receiver's screens includes instructions that will help you use
the menu system.
5. Select Options,
6. Select Setup.
7. Select Dish Pointing.
8. Select Point Dish Using Your Zip Code to bring up the Zip Code display screen.
9. Enter your zip code using the number keys on the remote control. Select OK when
you have finished.
Zip Code
G_el la mt_l la tlal _ iI0_l_ M_tt
Zip Code Display Screen
Once the zip code is entered, the display screen gives you the correct azimuth and
elevation for the installation site. Write both these numbers down so that you can refer
to them later.
DishPoirdhg
DSS Dish Azimuth and Elevation Screen