Manual

TROUBLESHOOTING
The DSSe System Test allows you to run a basic diagnostics check
on your DSS® system. If you are experiencing any trouble with
your system, run the system test.
Make sure that
All connections--jacks, cables, etc. are correctly in place. See
the section, Connecting Your DSSe Receiver, for more •
information.
There are batteries in the remote, and that they are working
correctly.
The access card is installed in the receiver.
RUNNING THE SYSTEM TEST
Follow these steps to run the diagnostics system test on your
system.
1. Turn on your TV and the DSSe receiver.
2. Press DSS®to put remote in DSS®mode, then press
MENU.SELECT to bring up the Main menu.
3. Point to and select Options.
4. Point to and select System Options,
5. Point to and select System Test.
6. If your system does not pass the system test, check any of
these potential trouble areas: cabling, pointing the satellite
dish, phone connection, andaccess card.
7. If you continue to have problems, call 1-800-679-4776.
68