Manual

VOL UP/DOWN Adjusts the audiovolume.
DIGIT KEYS (0-9) Use the digit keys to tune directly to a
channel. If YOUare in the menu system, use the digit keys to
enter numbers for the time_ date; channel and passwords.
INPUT .In TV and VCR mode, press the INPUT button one or
more times to toggle,through the available video inputs.
ANT .Lets you switch the source of the video signal from DSS®
satellite signals to an off-air antenna or cable signal.
TRANSPORT Buttons (REVERSE, PLAY, FORWARD, RECORD,
STOP, PAUSE) "Use when controlling an auxiliary device, such
as a VCR or Laserdisc player. Note that the RECORD button is
used to schedule a timer recording when using a program guide.
PROGRAMMI NG TH E REMOTE CONTROL
The DSS® remote can be programmed to control most brands of
remote controllable TVs, VCRs0and cable boxes. The remote is
programmed to control most RCA, GE and ProScan TVs and VCRs.
The remote needs to be programmed to control other
manufacturers' brands.
Using the Remote to Control a Second DSS®
Receiver
The remote can control two DSS® receivers. From the Main menu,
select Options, then System Options, then Remote Setup. Choose
which button, DSSl or DSS2, will control the DSS®receiver.
Changing the RF Remote Code
The remote can control the DSS®receiver using both IR (Infrared)
signals and RF (radio frequency)signals. IR signals require line of
sight to the receiver's front panel remote sensor. RF signals can
control the receiver from other parts of your house-even
through walls.
Occasionaliy, due to interference or other RFdevices, you may
need to change the remote and receiver RFcode. Change the
code in the System Options menu.
61