Manual

'RF Remote Setup.The remote can control the DSS®receiver
using both IR (Infrared) signals and RF (radio frequency) signals.
IR sigr_alsrequire line of slght to the receiver's front panel
remote sensor. RFsignals can control the receiver from other
parts of your house-even through walls.
Occasionally, due to interference or other RFdevices, you may
need to change the remote and receiver RFcode. To change the
code:
Follow the on-screen instructions to change the remote RFcode.
Picture Size The Picture size display screen allows you to choose
between a standard TV screen and a Cinema option. A standard
TV screen has an aspect ratio of 4:3; the Cinema option has an
aspect ratio of 16:9.
Data Port Let's you choose whether the low speed data port is
used for low speed data or communicating with the Home
Control Base accessory.See the Home Control section in this
book for more information.
ALTE RNATE AU PlO
When you select Alternate Audio from the Options menu, the,
Alternate Audio display screen comes up.
Point to the audio language or audio type you want and press
MENUoSELECT. The DSS®system will then automatically set the
audio program to the selected audio program type when that.
type is available.
There are two ways to change the audio:
• Press ALT AUD on the remote to temporarily change the
Audio program while tuned to the current channel.
• Point to Alternate Audio from the Options menu and press
MENU-SELECT to set the default Alternate Audio.
ALTERNATE DATA
Selects from among the available data on the current channel.
49