Manual

o
INTERACTIVE SETUP
If yoU .self-installed your satellite dish, yoU may have already used
the interactive setup to find the dish pointing coordinates,
acquire and fine-tune the signal, and run a system test.
If you need to run the interactive setup again, select Options
from the Main menu, thenselect Interactive Setup.
If you just want to check your dish pointing coordinates, or run
the signal strength meter, select Dish Pointing from the Main
menu. -
ORDERING DSS® PROGRAMMING
After you have installed your system,you should contact the
service providers, DIRECTV and USSBto receive DSS®
programming.
Programming with DIRECTV: Call 1-800-347-3288
Programming with USSB:
Call 1-800-204-USS8
When you order programming,
you need to know your Access
Card number. To get the number,
select Options from the Main
menu,,then System Options, and
thenselect System Test.
Wait for the system to run all of
it's tests.' The Access Card number
is displayed at the end of the
system test.
Write the Access Card number in
the space below for easy
reference:
16