Manual

CONNECTION C
• • ... :.
GOOD PICTURE AND SOUND QUALITY
To use this connection you must have:
= TVwith RFinput (jack)
• VCR with RF and audio/video inputs
• Coaxial andaudio/video cables
DSS
RECEIVER
?
To connect TV, VCR, and antenna or cable box:
1. Connect coaxial cables and audio/video cables as shown.
VCR
To receive DSS e programming:
• Tune TV to channel 3 or 4 (depending on how you set the
CH3/CH4 switch on the back of the receiver).
Toreceive off-air •programming (no cable box):
1. Turn off VCR and DSSe receiver.
2. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off VCR and DSSe receiver.
2. Tune TV to cable box output channel (usually CH2, CH3, or
CH4).
3. Tune cable box to desired channel.
To record DSS ® programming:
1. Tune TV to the channel on which you receive the DSS®signal.
2. Tune DSSe receiver to desired channel.
3. Set VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usuaily CH3 or CH4).
2. Turn DSS®receiver off.
CAUTION
components or other objects on
top of the DSS®receiver. See
Safety Information, inside front
12