Manual

CONNECTION B
VERY GOOD PICTURE AND SOUND QUALITY
To use this connection you must have:
• TV with separate RF and audio/video inputs (jacks)
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables
oss
RECEIVER
Iv
@@ @
'_SATELLITE
-II DISH
CABLE
OR
OFF.AIRANTENNA
To connect TV, VCR and antenna or cable box:
1. Connect coaxial cables as shown.
2. Connect audio/video cables asshown.
v&q
To receive DSS • programming:
1. Tune TV to receive line output from DSS®receiver
(often called Input 1).
2. Tune DSS®receiver to desired channel
To receive off-air programming (no cable box):
1. Turn off VCR and DSS® receiver.
2. Tune TM to desired channel.
To receive off-air programming (with cable box):
1. Turn off VCR and DSSe receiver.
2. Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
Tune cable box to desired channel..
To record DSS e programming:
1. Tune TV to record line outpot from DSS®receiver (Input1).
2. Tune DSS® receiver to desired channel.
3. Set your VCRto record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
r
CAUTION
Do not stack electronic
components or other objects on
top of the DSS®receiver. See
Safety Information, inside front
cover. .
11