Manual

Displaying Date and Time
Information On Screen
1. With a power supply attached,
press in the Lock Tab and rotate
the Power Switch to manual ([])
record. The power indicator lights.
2. Press in the MENU/BRIGHT dial
to display the camcorder's on-
screen nlenu system.
3. Rotate the MEN U/BRIGHT dial
to highlight the DISPLAY MENU
icon (t_). Press in the MENU/
BR1GHT dial to select it.
-
DATE/TIME
TIME CODE
LOCK AD&
.
Rotate the MEN U/BRIGHT dial
to highlight DATE/TIME. Press
in the MENU/BRIGHT dial to
select it.
LOCK AD&
. Rotate the MEN U/BRIGHT dial
to select ON or OFF.
ON Sets the date and time to
always be displayed on screen.
OFF The date and time do not
appear on screen
20
.
When the desired choice is made,
press in the MENU/BRIGHT dial
to activate it and exit back to the
DISPLAY MENU.
Note: You can proceed to make
changes to other DISPLAY MENU
i/ems, or highlight and select
"RETURN and then END menu
selections to exit the menus and
return to normal record viewing.
Time Code Display
During recording, a time code is
captured on the tape. This code
confirms the location of the recorded
scene on the tape during playback.
If recording starts fi'om a blank
portion of the tape, the time code
begins counting fl'om 00:00:00
(minutes: seconds: flame number). If
recording starts fi'om the end of a
previously recorded scene, the time
code continues from the last time
code number.
Note: The time code is automatically set
to 00:00:00 when a tape is ejected_
1. With a power supply attached,
press in the Lock Tab and rotate
the Power Switch to manual ([])
record. The power indicator lights.
2. Press in the MENU/BRIGHT dial
to display the camcorder's on-
screen menu system.
3. Rotate the MENU/BRIGHT dial
to highlight the DISPLAY MENU
icon (8). Press in the MENU/
BR1GHT dial to select it.
4. Rotate the MENU/BRIGHT dial
to highlight TIME CODE. Press in
the MENU/BRIGHT dial to select
the choice and display submenus.