camcorder user's guide CC641/CC643
Important Safety Information Be sure to read all the safety information before you begin to use this product. WARNING: ToreAucethe risk of fire or shock hazard, do not expose camcorder or AC adapter/charger to rain or moisture. ] I This symbol indicates "dangerous voltage'" inside the product that presents a risk of electric RISK OF _SHOCK DO NOT OPEN shock or personal injury. _ This symbol indicates accompanying the product.
We want to make sure you enjoy your new camcorder questions, call: Camcorder Customer Accessories Exchange Warranty. If you have any .......... 800-283-6503 (pages 80-81) Service ................................... 800-336-1900 (page 79) ............................................. 800-338-0376 (pages 66-71) Safety Information .............................. i • Using; the Battery to Power Your Camcorder ................... 13-15 First Time Operation • Assistance .............................
• Focusing • Playback on TV (or VCR) with Audio/Video In Jacks .. 62-63 • AutoFocus ................................ 32 • FocusLockFeature .................. 32 • Playback on a TV Without Audio/Video Inputs ............. 64-65 • Manual Focus........................... 33 • WhiteBalance .......................... 34-35 Optional Accessories ................... 66-71 • Fading InandOut......................... 36 • Accessory Order Form ............. 69-71 • 16X 9Mode.................................
This section describes only the basic steps necessary to set up your camcorder record. Refer to the other sections for detailed operation and feature options. to Assistance The toll-flee numbers are available to help you with any problem you may encounter. Camcorder Exchange Warranty............... 800-283-6503 li Customer Service ................................... 800-336-1900 Accessories ............................................. 800-2;38-0376 Unpack the camcorder and accessories.
To AC 100-240, 50/60 Hz Adapter/ Charger POWER Indicator DC OUT Jack DC Cable 2. Attach the adapter/charger. Since the battery must be charged before it can be used the first time, attach the adapter/charger camcorder. • Connect to the one end of the DC cable to the DC OUT jack on the adapter/charger. • Connect the other end of the DC cable to the DC in jack on the camcorder as shown above. • Plug the adapter/charger's plug into an operating outlet.
EJECT Button Tape Wheel LENS Cover Control ( PUSH Here to Close Tape Window p Switch and Handstrap Velcro Indicator Strip (Under Flap) 4. Adjust the handstrap your hand. to fit • Lift the flap on the handstrap separate the velcro strip. and • Insert your hand, adjust the strap to fit snugly, refasten the Strap, and close the flap. 5. Slide LENS COVER control to open lens cover. 6. Place POWER (CAMERA/ OFF/VCR) switch in CAMERA.
T2_30.40 Bu_on SP-SLP Button 7. Select a recording speed and tape length. Select SP or SLP recording speed. Press the SP-SLP button to select a recording speed. The speed selected (SP or SLP) appears in the viewfinder. • SP - Standard play provides the best picture, but the shortest recording time (20 minutes with a TC-20 tape). • SLP - Extended play provides three times the recording time as SP (60 minutes with a TC-20 tape). SLP has slightly more picture noise in normal playback.
Eyepiece Focus Control Electronic Viewfinder \ AE Dial 8. Set the AE dial to A UTO. • This places the camcorder in the AUTO mode. • In the AUTO mode, the focus, exposure, and white balance are automatically controlled by the carncorder. • Many of the special effects do not operate in the AUTO mode. Details on page 28. J Adjust the viewfinder and eyepiece focus control. • Pull out and rotate the viewfinder into a comfortable operating position.
STOP Button PAUSE Button Button Po_ver Indicator POWER (VCR/OFF/ CAMERA) Switch 10. Start and stop recording. • Press and release the thumb trigger to start recording. _ appears in the viewfinder, and the tally light will light when the camcorder is recording. • Press and release the thumb trigger again to stop recording. The camcorder is now in the recordpause mode ( =-PAUSE_appears in the viewfinder). Thumb Trigger 11. Play back what you have recorded. • Place the POWER switch in VCR.
14. Review camcorder's operating controls.
14. Review camcorder's Model CC643 Only: B (Bright) and C (White Balance) Controls (See trouble checks for details.) operating controls.
14. Review camcorder's operating controls. T20=30+40 Button (Also COUNTER R/M Button) SP-SIP Button r STOP Button _TER I T20"[.._ 0 SP'SLP R/M STOP / Button REW (Rewind) Bu (Also EDIT SEA RCH Button) Fast Forward) Button (Also EDIT SEARCH + Button) BATT.
Using the Adapter/Charger to Power Your Camcorder The adapter/charger attaches to the camcorder and lets you power your camcorder directly from standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery. To AC 100-240V, 50/60 Hz DC Cable POWER Indicator DC OUT Jack Attach Adapter/Charger Remove 1. Connect one end of the DC cable to the DC OUT jack on the adapter/ charger. 1.
Using the Battery to Power Your Camcorder The battery must be charged as described on the nextpage before it can be used the first time. Initial charging will take approximately 70 minutes. When fully charged, the battery should supply about 70 minutes of operating time (depending on how much you use zoom and pause). Conserve battery power by _:urningthe camcorder off during recording breaks.
Hold Battery Flush and Slide Reference Marks POWER Indicator To AC Wall Outlet 100240 Volts, 50/60 Hz. CHG Indictor END Indicator REFRESH Button Adapter/Charger Indicator Charge the Battery Use the REFRESH If the DC cable is attached to the DC OUT 1. Align reference mark on battery with mark on adapter/charger. The battery will provide increased operation time if you "refresh" it after five chargings. The refresh feature "refre, shes" the battery by completely discharging it. 2. 1.
Battery Level Indicator The battery level indicator appears in the viewfinder and shows you the amount of power in the rechargeable battery. • When _ appears, the battery is fully charged. • As the power is used appear. _ and • When the battery power is almost gone, x i / c---a flashes in the viewfinder. The camcorder will turn off automatically after a few seconds. Place the POWER switch in OFF to turn off the camcorder before replacing the battery.
Optional Car Cord Adapter The optional DCC08 car cord shown on page 66 allows you to power your camcorder from the cigarette lighter socket of a car, truck, or RV. It converts i 2-volts to a 6-volt output. Note: Consult the installation andoperating instructions enclosed with the DCC08 for complete operating instructions. Using the DCC08 Car Cord Adapter :CautioJts:_e _is>desi_nextto_ _, ne_ati_ O_ _,y.
Makesureyouselect goodqualitytapes tobeused withyourcamcorder. Useof poor quality tapes or tapes that have been damaged or mishandled can contaminate the video heads, resulting in a snowy picture or no picture at all during playback. Because there is no control over the type of tape purchased or rented by consumers, head cleaning is not covered under warranty. It is considered normal maintenance. The automatic head-cleaning system minimizes the need for accessory cleaners or cleaning by a Servicenter.
Inserting and Removing Cassettes _'_ufi6n:O EJECT Button Tape Wheel ..... ,- '_f_inghp_nd i_ the tape.win-_': dow facing out. Tab -,_uld glide _',_ t_e_ilytinttYthe ,._ compartment. -.-Donot force i e cassette. PUSH Here to Close Cassette Compartment Tape Window Before inserting a cassette, turn the tape wheel on the side of the cassette in the direction shown to remove any slack in the tape. . Attach a power supply. Then slide and'.release EJECT to open the cassette compartment.
Viewfinder The camcorder's viewfinder is a miniature monitor that displays the picture seen by the camcorder when recording. Adjust Viewfinder for Convenient Viewing For convenient viewing, you can slide the viewfinder out from the camcorder and rotate it up and down. Eyepiece Focus Control , _ / vi&{ind_:_o r pXetei , und e vie_d/ar camcorder. the When carrying the camcorder with the shoulder strap, put the viewfinder down and in. This helps prevent possible damage to the viewfinder from .
Making a Recording The steps below tell you how to make a recording and suggest using some of the recording features. Each feature is described in detail on the following pages. Button T20.30,,40 Button SP-SLP Button SELECT Button EDIT SEARCH Buttons LENS COVER Control Lever Attach Power Supply POWER 1. Attach a power supply. Attach the adapter/charger, charged battery, or optional DC car cord. 2. Insert a tape. • Turn the tape wheel on the cassette to remove any slack from the tape.
6. Select a recording speed and tape length. A. Press the SP-SLP button to select SP or SLP recording speed. B. Press the 720,30,40 button to select the length of the tape you are using (T20, T30, or T40) so the camcorder can correctly calculate the time remaining. 7. Set the AE dial for a special effect. • Place the dial in AUTO to place the camcorder in the full auto mode. • Place the dial in ( ,_ ) sports or 1/1000 to record fast-moving action.
Battery • Level Indicator This indicator power • (_ • ) shows the amount left in the rechargeable indicator flashes when the power dial is set to CAMERA and the safety tab has been removed from the cassette or there is no cassette in the camcorder. SELECT • Press SETto select date, AUTO DATE, date and time, or a title you created. SET CHAR appears if you have not created a title.
Viewfinder Displays (continued) 5rain T30 M 0:00:00 +03 LENS COVER TAPE END Change Indicator (=") Exposure Indicators (+03) This indicator appears to let you know that an item in the recording menu has been changed from the original factory setting. This indicator appears when you are adjusting brightness manually using the + and -- buttons in the center of the AE dial. Dew Warning (l-g]) Focus Indicators The dew indicator appears when excessive moisture (condensation) has entered the camcorder.
Lithium Time Remaining Cell ( d_ ) • This indicator seconds when camcorder and or needs to be • Details are on page 3& Self-Timer, Indicators • appears for a few you turn on the the clock cell is missing replaced. Animation, (,_ The interval or time-lapse The approximate time remaining on the tape is automatically displayed. The correct tape length must be set with the T.20.30"40 button.
Tally Light Microphone Flying Erase Head Tally Light A separate erase head is mounted on the spinning headwheel (hence the term "flying"). This allows you to make clean edits without the "glitches" or "rainbow noise" that may occur at the beginning or the end of recordings. The lally light lights when the camcorder is recording. Auto Head Cleaner The camcorder has an automatic headcleaning system. Whenever a cassette is inserted or removed, this system is activated.
Exposure Control When the AE dial is in AUTO, the camcorder controls the iris for you. Under normal conditions, the camcorder will adjust brightness automatically. You may need to adjust brightness manually when the background is too bright or too dark in comparison with the subject. "AE Dial Manual Exposure Turn Off Manual Exposure 1. Place the POWER switch in CAMERA. Press both + and - at the same time or • The power indicator will light and the camcorder will enter record pause.
Zooming You can zoom in and out for close ups or wide-ang]:e shots just by sliding the zoom lever on the camcorder. The camcorder can automatically focus when you zoom at most distances. If you want to record a close-up of a small subject closer than three feet, you can turn on the Tele Macro feature in the recording menu. This feature allows you to record a small subject at a distance of approximately 23 inches. Zoom Lever Using the Zoom Lever 1. To zoom in or out, slide the zoom lever on the camcorder.
Tele Macro Zooming FOCUS b. FOCUS To Turn on Tele Macro Zooming 1. Make sure the AE dial is not set to AUTO. 2. Press the MENU button. The recording menu will appear in the viewfinder. 3. Press + or- in the center of the AE dial to highlight TELE MACRO. GAIN UP MAX INTERVAL TIMER REC TIME JLIP ID NO. SET CHARACTER DATE/TIME OFF OFF 07 END :MENU < 4. Press < or • in the center of the AE dial to select • ON or OFF.
Focusing Under normal conditions, the camcorder can adjust focus automatically. Under certain conditions, you may need to focus manually. \ AE Dial FOCUS Auto Focus Focus Lock Feature During auto focus the camcorder will focus automatically on the object located in the center area of the viewfinder. The fecus lock feature is useful when • Place the AE dial in AUTO to turn on the auto focus feature. Note: The low-contrast indicator ( a.
Manual Focus Under certain conditions, such as those listed, you may need to focus manually. flash. When the focus cannot be adjusted any farther, the _, indicator will flash. When the focus cannot be adjusted any closer, the -'- indicator will flash. 1. Set the AE dial to MAN. 2. Slide the power zoom lever toward T to zoom in on your subject. To maintain proper focus throughout the zoom range, you must zoom in on the subject before adjusting the focus. 3.
White Balance Making colors look natural is what white balance is all about. This is achieved by adjusting the way the camcorder "sees" and records the light source in the scene you wish to record. Your camcorder is equipped with automatic white balance. However, under certain conditions, such as recording an objec!: with various shades of the same color or when recording a predominantly red or brown object outdoors, you may want to adjust white balance manually.
. Press SET until the white balance The MWB indicator will flash indicator you want appears in the viewfinder. while the camcorder is adjusting white balance and stop flashing when it is ready to record. _.M.W.B.4 Note: To change the tint for special recording, substitute colored paper for white. The white balance is adjusted based on the color. MWB Red paper - deeper green Blue paper - orange Yellow paper - deeper purple Select The white balance indicator you select will appear in the viewfinder.
Fading In and Out You can add a professional touch to your recordings when you fade in and out of scenes. The picture will gradually appear or disappear. The speed of the fade is automatically controlled by the camcorder. I Dial Button _ELECT Button 1. Place the POWER switch in CAMERA. The power indicator will light. The camcorder will enter record pause. 2. Make sure the AE dial is not set to AUTO. 4. • Press the thumb trigger recording fade in.
16 X 9 Mode New 16x9 TV Screen The camcorder has a 16 X 9 recording mode that lets you make recordings compatible with the 16X9 format. When 16 X 9 is activated, the camcorder records black bars at the top and bottom of the picture to produce the wide-screen effect. This is also known as "letterbox" recording. Standard Shape TV Screen m16X9_ AE Dial -SET Button Button 1. 2. Place the POWER switch in 4. CAMERA. The power indicator will light. The camcorder will enter record pause. Press SET.
Date/Time Display -- Clock Lithium Cell The clock cell indicator t_ will flash for a few seconds in the viewfinder when you turn on the camcorder if the cell has not been installed or needs to be replaced. Clock Cell (+ Side Insert Object Here to Remove Cel Clock Cell Compartment Install the Clock Lithium Cell 1. Make sure camcorder is turned off, and remove any power supply attached to the camcorder. 2. Press release tab of clock cell compartment cover and open the compartment. 3.
Date/Time Display m Setting the Time and Date The date and time must be set before it can be displayed and recorded on your tapes. The clock cell must be installed as shown on the previous page before the date can be set and recorded. AE Dial Button 1. Make sure the AE dial is not set to AUTO. 2. Press the MENU button. The recording menu will appear in the viewfinder. 3. Press + or- in the center of the AE dial to highlight DATEgTIME. GAIN UP TELE MACRO INTERVAL TIMER REC TIME JLIP ID NO.
Date/Time and Title Display m Recording The clock cell must be installed and the date and time set (as shown on the previous pages) before the date and time can be selected and recorded. You must have created a title (as described on page 43) before your title can be selected and recorded. Dial Button SELECT Button Select Date, Date and Time, or Title to Record 1. Attach a power supply and place POWER switch in CAMERA. The power indicator will light. 2.
AUTO DATE NOV NOV 18.97 18.97 AM10:25 _Display / SET CHAR V,_?__ Title Display To Record lo 2. . 4. ? the Date, Date and Time, or Title on Your Tape Place the camcorder in record pause. Make sure the AE dial is not set to AUTO unless you want to record AUTO DATE. 5, Begin recording. 6. Press SET to remove the display from the viewfinder when you are finished Repeatedly press SELECT to display D,DISP.._ .
Titles -- Recording The title feature lets you choose one of eight preset titles or create your own title -- up to 18 characters. The clock cell battery must be installed as shown on page 38 before you can create or store your own title. Dial MENU Button Button Add a Preset Title 1. Attach a power supply and place POWER switch in CAMERA. The power indicator will light. 2. Make sure the AE dial is not set to AUTO. . 4. Repeated press SELECT until _,TITLE4 appears in the viewfinder.
Create Your Own Title 1. Make sure the AE dial is not set to AUTO. 6. Repeat step 5 until you have entered your title. 2. Press the MENU button. The A B C K L M TU VW recording menu will appear in the viewfinder. 3. Press + or- "A'E "1 b'u_oA& : 0 in the center of the AE dial to highlight SET CHARACTER. b: MAX OFF OFF OFF 07 DATE/TIME 4. Press • in the center of the AE dial to display the character set menu. _=A BCDE FGH I _J KLMNOPQ RS TU V WX YZA O U "A'E "1 b "U I_ £E O A & : ., / ! ? /.
Gain Up This feature allows you to choose how you want to record subjects in dark environments. MENU Button 1. Make sure the AE dial is not set to AUTO. Note: GAIN UP MAX is automatically selected when the AE dial is set to AUTO. 2. Press the MENU button. The recording menu will appear in the viewfinder. TELE MACRO INTERVAL TIMER REC TIME JLIP ID NO. SET CHARACTER DATE/TIME END :MENU KEY 44 OFF OFF OFF 07 3. Press < or I_ in the center of the AE dial to select GAIN UP MAX, NORM, or I_ OFF.
AE Dial The AE dial lets you select one of several different effects. Turn the dial to select the effect you want. The indicator for the effect will appear in the viewfinder. Set the AE dial to MAN for normal recording. Mode A UTO MAN Indicator AUTO Uses Places camcorder in full auto mode. Fade, display, title, 16 X 9, manual focus, manual exposure, and manual white balance will not operate. LOCK A UTO RELEASE Use this mode for recording using some of the manual features.
Self-Timer The self-timer lets you set the camcorder to delay recording so you can be in the scene when recording begins. -----_AE Tally Light To Set the Self-Timer 1. Place the POWER switch in CAMERA. The power indicator will light. 2. Make sure the AE dial is not set to AUTO. 3. Press the MENU button. The recording menu will appear in the viewfinder. 'MENU Button 4. Press + or - to select INTERVAL TIMER. GAIN UP TELE MACRO MAX OFF REC TIME JLIP ID NO.
, Press -_ or _ in the center of the AE dial to select the amount of time you want the camcorder to delay before recording starts. • Select 15S to delay the recording for 15 seconds. • Select 30S to delay the recording for 30 seconds. • Select IMIN to delay the recording for one minute. • Select 5MIN to delay the recording for five minutes. • Select OFF if you do not want the camcorder to delay recording. 6. Press MENU to exit the menu. 7.
Animation Recording Animation recording produces an illusion of movement for an otherwise stationary scene or object by shooting a series of pictures of slightly different poses (such as cartooning). AE Dial Tally Light MENU Button To Record Using Animation 1. Place the POWER switch in CAM- 5. Press + or - to select REC TIME. ERA. The power indicator will light. 2. Press SP-SLP to select SP recording speed. SP appears in the viewfinder. 3. Make sure the AE dial is not set to AUTO. 4.
6. Press 4 or _- in the center of the AE dial to select the amount of time you want the camcorder to record. • Select 1/4S to record for 1/4 second. • Select 1/2S to record for 1/2 second. • Select 1S to record for one second. • Select OFF if you do not want the camcorder to record for a set amount of time. 7. Press MENU 8. _ to exit the menu. and the amount appear of recording time in the viewfinder. ? '_114S Recording Time Indicator in Viewfinder 9.
7; €,_' Time-Lapse Recording i!i, _ Time-lapse recording makes automatic recordings at preset time intervals. The recording will show subtle changes (such as shifts in cloud formations or plant growth) when it remains focused on an object. ;27 @ "3. AE Dial .°. Tally Light MENU Button To Record Using Time Lapse 1. Place the POWER ERA. 2. The power switch in CAMindicator will light. Press SP-SLP to select SP recording speed. SP appears in the viewfinder. .
.m ,r _ 11. Press the thumb "7. Press + or - to select REC TIME. trigger to start \-,?,. recording. GAIN UP TELE MACRO Note: The camcorder will start and stop recording the selected amount of time at the intervals selected. The tally light flashes with the flash speed increasing five seconds before recording begins. MAX OFF INTERVAL TIMER OFF JLIP ID NO. SET CHARACTER 07 DATE/TIME 12. To stop recording, set the INTERVAL TIMER and REC TIME in the END :MENU KEY recording 8.
Time-Remaining Display The approximate time remaining on the tape in the camcorder for the tape speed you have selected is automatically displayed in the viewfinder. Use the T20o30o40 button to set the correct tape length before the camcorder can correctly calculate ), time remaining. ,i T20,30,40 Button SP-SLP Button ,'o, 30MIN I T30 30MIN 29MIN SP :_' I 1 l ,L ;it, _ 3MIN TAPE END 2MIN (Flashing) 3NIN (Flashing) OMIN (Flashing) _._ Set the Tape Length 1.
JLIP (Joint Level Interface The camcorder device, Protocol) Identification has a JLIP connector Number that may be used in the future to connect a such as a home computer. AE Dial JLIP Connector MENU Button To Select a JLIP ID NO. 1. Place the POWER ERA. 2. 3. The power switch in CAMGAIN UP TELE MACRO INTERVAL TIMER REC TIME indicator will light. Make sure the AE dial is not set to AUTO. Press the MENU button.
Recording and Traveling Tips Recording Tips • In case of fire or theft, make a video recording of your home and contents store in a safe place. • Try to make sure indoor scenes well-lit. • Do not move the camcorder from side-to-side steady, gradual and "jitter". • • • are • "pan" avoids A blurring to make sure the will appear or close-ups when taping of individuals family outings Fading in and out of scenes your videos appear show up as visual recording.
Attaching the Shoulder The camcorder's shoulder Strap strap is designed to let you carry the camcorder your shoulder and - when you are ready to shoot - bring the camcorder position in one quick movement. from to shooting To Attach the Shoulder Strap If the strap keeper is over a double 1. section 4. Attach the other end of the strap to the other shoulder strap attachment ring. 5. Adjust the shoulder desired length. 6.
Using the Cassette Adapter The camcorder uses a smaller size cassette, but records in standard VHS format. The cassette adapter allows you to play your VHS-C cassettes in a VCR just like other standard VHS cassettes. Insert the VHS-C cassette into the cassette adapter. VHS VCR like a normal VHS cassette. Install Cassette Adapter's Insert the cassette adapter into the Battery Battery Compartment Cover 1. Remove 2. Install battery supplied compartment cover.
Load Detector Gently . close the cassette compartment lid until it locks into place. the cassette reel area under • Make sure the adapter is free to turn while the cassette loading. Note: • is You should hear a whirring sound while the tape loads. The adapter's load detector adapter. will automatically retract into the Cauf!om extending: a If,_e ! _e_ _al _i_;:. to, load _:tliee_se l_se_ _e;_e_setl _i_i__ide " _a_s_ d_ t_ Remove Cassette from Cassette Adapter ....... _............. _.
Viewfinder Viewfinder Playback playback is the simplest way to watch tapes using the camcorder. Button PLAY/ PAUSE Button EJECT\ Switch FF Button REW Button POWER Switch in VCR To Play Back a Tape 1. Place POWER switch in VCR. The power indicator will light. 3. Press PLAY/PAUSE If necessary, adjust During playback, use the playback features on the next pages. 2. Slide EJECT and insert the cassette you want to play back. Close the cassette compartment. 58 to begin playback. tracking. 4.
Playback Features Visual Searching Stop-Action • During playback, press and release FF or REW if you want to search the tape visually in forward or reverse. • During playback, press PLAY/PAUSE to "stop the action" and view one frame of the tape. • Press PLAY/PA USE to return to normal • Press PLAY/PA USE to return to normal playback. Pause playback. • For brief searching, press and hold FF or REW for more than two seconds. • Release the button to return to normal playback.
Playback Features (Continued) CO UN TER R/M Button Button Switch REW Button Switch VCR in Time Counter The time-counter segment of tape. display shows the actual time elapsed when playing back a The memory-stop feature helps locate a certain point on the tape. When memory stop is on, the tape will stop automatically or fast forward when the time counter reaches M 0:00:00. To Use the Memory-Stop 1. Locate the place on the tape you want R/M for less than 2.
Playback Features (Continued) FOCUS Tracking Buttons (Also + and - Buttons) Tracking During playback, button streaks to move the streaks During stop-action may appear in the playback picture. Press either tracking up or down and out of the picture. playback, pressing one tracking button may reduce picture "jitter" (picture bouncing up and down). Some "jitter" is normal. Note: The tracking buttons may have no effect on tapes recorded on other camcorders or VCRs.
Playback on TV (or VCR) with AUDIO/VIDEO To connect your camcorder to a TV monitor you will need an optional audio/video cable TV is already connected to a VCR, you can what the camcorder is recording or playing Back of Mono VCR or TV Monitor IN Jacks (or VCR) with AUDIO/VIDEO IN jacks, such as VH83 shown on page 68. If your attach the camcorder to the VCR and watch on the TV. White Output Cable / _ Audio Plug (Optional) Audio/Video Yellow Video Plug _ A'tJDIO Jack ........ --OR--- ".. .° .
Playback Operation and How to Copy Tapes on the VCR 1. A. Camcorder connected directly to TV: Turn on the TV and tune it to the video input channel. B. Camcorder is already connected . to VCR that connected to TV: Turn on VCR and place it in the "line" or "camera mode". (If your VCR does not have a "line" or "camera mode", consult manual.) the VCR owner's Operate the TV as you normally do to see the signal coming from the VCR. 2. Place the POWER switch turn on the camcorder. indicator 3.
Playback on a TV Without Audio/Video Inputs To connect your camcorder to a TV without audio/video inputs, you will need an optional 1CVA147C RF output adapter and an optional coaxial RF cable, such as VH82 or VH90 shown on page 68. If your TV has AUDIO and VIDEO IN jacks (or is connected to a VCR), refer to pages 62-63.
Playback Operation 1. Set the CH3/CH4 output adapter switch 4. Place POWER switch in VCR. Power on the RF to channel indicator will light. 3 or 4. 2. Turn on the TV, and tune it to the same channel output 3. you selected adapter's Place adapter's VCR. with the RF CH3/CH4 VCR/TV • switch. switch in 6. Press STOP on the camcorder Is Recording 1. Turn on the TV and tune it to channel 3 or 4. When the camcorder is used as caused 2.
We invite you to take a look at some great ideas for sparking creativity and adding to the fun of using your compact VHS camcorder. The following pages have a selection of accessories to help make your memorable moments look and sound even better. These accessories are designed to make the process of recording and watching your videos more enjoyable. To order accessories, contact your local Dealer.
Using the Optional FB1260 and FB120 Rechargeable Batteries Mounting AC088 the camcorder Tripod on a tripod, such as AC088, will keep the camcorder steady and produce excellent video results. This tripod's These rechargeable batteries nickel-cadmium are designed specifically for long life. The FB 1260 is the same battery that came packed with your camcorder. The FB 120 powers your camcorder twice fluid-effect head provides smooth camera pan and tilt.
1CVA147C RF Output Adapter VH54 Cable Transformer This 75-to-300 ohm transformer is used to connect a standard 75-ohm antenna cable This RF output adapter is used with a coaxial RF cable, such as VH82 or VH90, to connect your camcorder (such as VH82 or VH90) to the 300 ohm screw terminals on a TV. to a standard TV (one without audio/video inputs) for playback. If your antenna cable is the flat twin-lead type attached by two screws, you will also need a 300-to-75 ohm transformer.
Order Form for Camcorder Description Super Lightweight Soft Camcorder Shoulder Tripod Case Strap Y-Adapter AC Battery Charger Car Cord Adapter Model CC643/CC641 Part No. Price AC088 $ 39.95 AC201A $ 39.95 ACS091 $ 12.95 AH25 $ CPS91 $ 59.95 DCC08 $ 89.95 1.95 Rechargeable Battery (Extended) FB 120 $ 79.95 Rechargeable Battery (Standard) FB 1260 $ 49.95 VH54 $ 1.95 VH82 $ 4.95 VH83 $ 4.95 VH90 $ 5.
Charge your order on your VISA,MasterCard, or Discover Card by filling in below USE IMPORTANT: YOUR CREDIT CARD Copy complete account number from your VISA card __1 I IMPORTANT: [ 11 [ I [ Expirationdate:["'-_'-"] Copy complete account number from your MasterCard 7T7- -5-Y-q VT-l-q-qV-VTS-q Copy Number above your name on MasterCard IMPORTANT: _ Expiration date: [--T"] Copy complete account number from your Discover Card I I I I I VTq-_ Expiration date: _ [-I-T_ [-q-]-_ ['_ AUTHOR
To order accessories, contact your local Dealer. If a dealer is not nearby, you can also follow telephone or direct-by-mail. the directions below to order by United States and Canada Orders To place your order by phone, have your Visa, MasterCard, or Discover card ready and call the toll-free number listed below between 8AM and 8PM (EST) Monday through Friday or between 9AM and 5PM (EST) Saturday. Use this number only to place an order for accessory this order form.
Troubles sometimes are caused by simple "faults" that you can easily correct without the help of a service technician by first checking a few basic remedies. Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter, look below for the type of trouble you are experiencing. Then perform the simple checks and adjustments listed for that trouble. If service should be necessary, the warranty information covers and explains how to get service.
Tape stops during rewind or fast forward Camcorder remains Time-counter memory may be on. Whenever an "M" appears with the time-counter display, the camcorder will stop rewinding (or fast forwarding) when counter reads M 0:00:00. Press REW or FF again to continue rewinding or fast forwarding, or press COUNTER R/M to turn off the memory-stop feature. in Press PLAY/PA USE to return to normal playback. pause mode Sound is too low or distorted Subject Dew Indicator was too far from camcorder.
Picture is too dark or subjecttoo dark • • • • For best results, only use higher shutter speeds outdoors. Rotate AE dial to sports (._) or 1/1000. See page 45. Subject in front of a strong backlight. Rotate AE dial to select back-lit (B). See page 45. Subject in front of a strong frontlight. Rotate AE dial to select front-lit ([]). See page 45. Place AE dial in MAN and press + or -. See page 29.
Vertical white lines appear when shooting bright object Error number (EO1, E02, etc.) appears in viewfinder This may occur when background contrasts with the subject. extremely Try disconnecting power source. Wait ten seconds and then connect power source again. If error number does not disappear from viewfinder, consult your Authorized RCA Camcorder Servicenter.
Cleaning the Camcorder To clean the camcorder's exterior, remove any power source connected to the camcorder and gently wipe it with a clean soft cloth. Cleaning the Camcorder's Lens __:__'___:_:___'_ To clean the camcorder's lens, blow it with a blower brush, and then gently wipe the lens with cleaning tissue and commercially prepared cleaning solution designed for use on camera lens. Improper cleaning may scratch the lens. Caution: Do not touch the lens with your fingers.
Proper Care and Storage Keep dust and grit from entering the camcorder's cassette door. Dust and The camcorder can be damaged by improper storage or handling. Do not grit are abrasive and will cause excessive wear to both the camcorder's subject the camcorder shaking, or dropping. recording/playback cassettes. Do not store the camcorder heads and When Before always your camcorder, make in temperatures below -22°F (-30°C) above 149°F (65°C).
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Thomson You can reach Thomson at the following number: number provides necessary, to you. Our toll-free Camcorder number operates from 8 a.m. to 5 p.m., CST Monday - Friday for U.S. customers only Returning equipment Please Many and if unit can be shipped have your camcorder serial number and date of purchase when you call. model/ ready If your unit is out of warranty, we will quote to Thomson over the phone, a replacement replacement you with your camcorder.
What your • warranty of purchase covers: you will be provided refurbished unit. Any defect in materials or workmanship. For how long after your purchase: • • to the exchange . If the repairs warranty, 90 days for labor charges. One year for parts. If you are not located point: During the initial 90 days 1.
Return transportation, storage, and handling costs and insurance are your sole responsibil- What • Adjustment ity. We accept or loss. • • Damage from misuse or neglect. A unit that has been modified or To receive received no liability in case of damage a replacement your unit after on the outside of the used to return the unit. Make you insure damage your shipment sure in case of or loss. 2. Carefully 3. Include material if possible.
Camera Section General Power requirement: Image Sensor: 1/4" CCD Imager Lens: F1.6, f=3.8 to 68.4mm 6VDC Power consumption: CC641:5.3 watts CC643:5.5 watts 18:1 power zoom lens Filter Diameter: Weight: Approximately 1.8 lbs.
+ and-buttons 29, 46, 48, 50 16 X 9 mode 23, Accessories included Cassette 31, 39, 43, Cassette compartment Cassettes 37 3 Adapter/charger, AE dial Cleaning Cleaning using 50, 53 recording 1, 3, 79 feature 10, 62, 64 28, 40, 41 recording 26 B (bright) control 10 BACK LIT feature 21, 76 viewfinder 76 79 38 40 Displays, status EDIT SEARCH 15 charging 14 level indicator 15, 23 button Erase protection 17 Exposure control 29 Eyepiece focus control 7, 10, FADE indicator 21, 23 Fading 3
Indicators 16X9 23 AE dial 21, 22, 45 animation 25 AUTO 22 Limited warranty 80 Manual focus 33 Marker switch 13 Memory-stop feature 60 MENU button 9,31,39,43,46,47,48,49,50,51,53 Microphone 9, 26, 27 Operating controls 9 Optional accessories 66 Pause indicator 5, 8, 20, 23, 28, 29 PLAY/PAUSE button 8, 11, 59, 63, 65 Playback first 8 BACK LIT 22, 45 batterylevel 15, 23 change 24 DISP. 23, 43 exposure 24 FADE 21, 23, 36 focus 24 FRONT LIT 22, 45 HZ:HAZE 22, 45 LENS COVER 25 lithium cell 25 M.W.B.
menu 31, 39, self-timer 46 speed 21 time-lapse 43, 46, 50 title display 40 Recording speeds 6, Recording REFRESH Tape length display 21 Tape length, set 52 Tape positioning 59 Tape speed indicators 23 Tele macro zooming 31 Things to avoid 77 Thumb trigger 10, 21, 27, 47, 49, 51 Time counter 60 50, 53 17 tips 54 button, adapter/charger Registration i REW (rewind) button Time-lapse recording Tips, recording 54 Tips, traveling 54 Titles 8, 11, 59 RF DC OUT jack RF output adapter, Safety information
Need Assistance? We want to help! U.S. Consumers: Camcorder Exchange Warranty Customer Service Accessories 800-283-6503 800-336-1900 800-338-0376 Canadian Consumers: 800-522-0338 800-522-0445 English French If your camcorder contact needs service, your dealer from the yellow please or the nearest pages. Please Servicenter do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product.
