Owner's Manual

12
EN
Playing a Blu-ray Disc or DVD
1. Press button to turn on the unit.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 2.
2. Press button to open the disc door.
3. Gently place the disc in the tray.
4. Press button to close the disc door. It takes a short while for your unit to load the disc. After loading, for most
discs, the unit will automatically take you to the main menu or start playing. If the unit does not automatically
start playing the disc, press the PLAY button.
Pausing Playback (Still Mode)
Press the (PAUSE) STEP button to pause. To resume normal playback, press the PLAY button. Each time you press
the (PAUSE) STEP button, the picture advances one frame on disc.
Stopping Playback
To stop playback, press the STOP button. To resume playback, press the PLAY button. Depending on the disc,
playback starts where it stopped or at the beginning of the disc.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will reset
the disc to the beginning.
Skipping to a Different Track
• Pressthe SKIP button to go back to previous titles/chapters/tracks.
• Pressthe SKIP button to advance titles/chapters/tracks.
• ForanaudioCD,usethenumberbuttonsontheremotecontroltogodirectlytothedesiredtracknumber.
Zooming into an image
While a disc is playing, press the ZOOM button to enlarge the image in serveral levels.
• Whileanimageiszoomed,youcanusethe , , or CURSOR button to shift the view and display the part
you want.
• To return to normal view, press the ZOOM button repeatedly until "OFF" shows. The screen will return to
normal.
• Whenyoureachtheedgeoftheimage,thedisplaywillnotshiftanymoreinthedirection.
Fast Forward / Fast Reverse
1. Press the or button when a disc is playing.
 •Thediscbeginsafastscanattwotimesnormal(x2)speed.
 •Eachtimethe or button is pressed, the speed of the fast scan changes.
2. Press the PLAY button when you have reached the desired point to resume playback at normal speed.
This owner’s manual explains the basic instructions
for operating this unit. Some discs are produced in
a manner that allows specific or limited operation
during playback. Therefore, this unit may not respond
to all operating commands. THIS IS NOT A DEFECT.
Please refer to the instructions accompanying the
specific disc in question for more information about
the options available on that disc.
“ ”mayappearonthescreenduringoperation.A“
”meansthatthedesiredoperationisnotpermitted
by the unit or disc.
Playing a Blu-ray Disc or DVD
Audio Selection
On some discs, the sound is recorded in two or more formats. Follow the directions below to select the type of
playback.
1. While a disc is playing, press the AUDIO button to show the current audio format number.
2. Press the AUDIO button repeatedly to select the desired audio format.
Note:
• Ifonlyoneaudioformatisrecorded,thenumberdoesnotchange.
• Abouttwosecondslater,playbackcontinuesinthenewaudioformat.
x2 x4 x8 x16 x32
x2 x4
x8
x16 x32
BRC11082_ENG IB_20100902.indd 12 9/3/2010 10:27:08