Manual

Tape won't play or record
If"youre using the remote control, prvss VCR to put the rvmotv in VCR mode bvf_:)re you press PLaY or RECORD.
Make sun, a videotape has bven inserted.
Eject and reinsert tapv.
The tape might be broken -- tl T another tape.
Check to soy if the safety tab ires bern removed. If" it has, the TV/VC_I)VD will not record.
The TV/VCR/I)VD might by in pause mode. Press PLAY on the remote to return the tape to play mode.
Time counter not working
The time counter will not advance during unrecorded portions of tape.
You have rewound the tape farther back than a counter reading of 0:00:00. A minus (-) will appear if this has occurred.
OTR recording is set.
Snow or streaks in picture or no picture during tape playback
Some snow/streaks arv normal during search pause, frame advancv, and slow-motion playback.
Check tape. it may by worn out or of poor quality.
Might need to adjust the tracking. Go to page 42 for instructions.
TV/VCR/DVD makes noise when VCR stopped
VCR is removing tape from beads, which is normal. '['l_e head cylinder inside the VCR continues to rotate for a few minutes after you
put the VCR in stop mode.
DVD Playback Problems
DVD won't play
Make sun, disc is for Region 1 for this player.
Make sure the correct type of disc is inserted. Go to page 20 for more information.
Disc may be dirty. Clean disc. Go to page 73 for morn infk)rmation.
DVD's Disc Language different than players menu's
Some DVDs menus may not by available in your languagv.
DVD playback volume lower or higher than expected
Check compression and digital audio settings. Go to pagv 62 f_:)rmore inf_:)rmation.
DVD playback image is boxed in or distorted
Verify the correct TVMOI)L; setting. Go to pagv 60 f_:)rmore inf_:)rmation.
No Virtual Dolby (QSURROUND) effect output to the receiver
Virtual Dolby (QSI.JRROI.JND) is not available while listvning to the audio through the digital output jacks.
Disc will not play
Parvntal Control set. Go to page 61 for morv information.
68