Manual

Using
Set Parental Limits
The PARENTAL SETUt_menu lets you set viewing limils according to a movie's ruling or
contents. Some discs are equipped wilh a ruling feature that rates the disc according to the
content. So1:qe discs let you edil out scenes and replace them with scenes suitable for children.
You can also set the locking feature so any discs beyond the rating you select cannot be played.
PARENTAL SETUP
CODE: USA
PARENTAL SETUP
_!_ PASSWORD:
CODE: USA
PARENTAL SETUP
PASSWORD:
CODE: USA
PARENTAL SETUP
SELECT LEVEL
CODE: USA
1. Press the DVD SETUP bulton to display lhe setup menu.
2. Press the up or down arrow button to highlight lhe :_ (PARt]'NTAL 5k'I'TUP
icon), and press OK to display the PA£5'WORD screen.
3. Use the number butlons (0-9) to enter a 4-digit password, and press OK.
The password verification screen appears. Enter your password again, and
press OK.
Important Note: Besure to remember your password. The next time you try to
accessthis menu, you will have to enter the samepassword.
If you forget your password, you can erase the current one by pressing the STOP
button on the remote four times.
4. The ratings t_r the USA are listed. Press the up or down arrow button to
highlight the highest level you want DVDs played.
• Select 1 (G rating) for the 1:qost reslricted viewing.
• Select 3 for PG rating.
• Select 4 for PG13 raling.
• Select 6 for R rating.
• Select 7 for NC-17 rating.
• Select 8 for adult viewing.
5. Press the OK button on the remote to set the viewing level.
Notes: if this feature is set to OFF,the selected rating does not apply. All discscan
be viewed.
The discs must be encoded with the rating feature.
Somediscslet you temporarily change the level setting to view original scenes,and
some discs have a set level and cannot be modified.
61