Manual

Using Coheir@!

SOUND Use this button to display available audio for lhe type of disc that is playing.

SPEED-ZOOM Use to zoom in on the picture when playing DVD discs.

STOP Stops disc play.

SKIP-TITLE Allows you to see the title and other options available on the current disc (if the

disc contains the options).

VIEW Allows you to switch to a TV program or a recording channel, if you are recording.

C5_

You'll use mese DU_lOnS when

you program the remote to

operate another component.

Important: The remote might

not operate all models of all

brands. The remote buttons

also might operate differently

for other components,

especially when you're using

their menu system.

Programming the Remote to Operate

Other Components

"[l_e universal remote control can be programmed to operale most brands of

remole controllable VCRs, salellite receivei:s and cable boxes. "iI_e remote is

already programmed to operate most RCA, GE and Proscan VCRs and satellite

receivers.

Note: The TV, VCR, and DVD buttons cannot be programmed.

Find Out If You Need to Program the Remote

To determine whether lhe uniw:rsal remote needs to be programmed, turn a

component ON, such as a VCR, point the remote at the VCR, and press the

VCR2 button. Then press ON*OFF or channel up or channel down to see if the

VCR responds to lhe remote commands. If not, lhe remote needs to be

programmed.

How to Program the Remote

There are two ways to program the remote con|rol: automatic code search and

direct entry. Instructions for both ways follow.

rip

Tostop the automatic code search without

programming any components,press and hold

CLEARuntil the light on the remote turns off.

Using Automatic Code Search

1. Turn on the component you want the remote to operate (VCR or satellite

receiver).

Press and hold lhe component button on lhe remote I/nat corresponds to lhe

component you want the remote to operate (VCR2 or SKI'* CABLE). While

you hold down the component butlon, press and hold ON*OFF (when the

light below the ON* OFF button on the remote turns on, release bolh

buttons).

(Steps continued on next page)