Manual

Connections S ' up

TV/VCR/DVD + Receiver

1A. Connect the Dolby Digital or DTS receiver to the TV/VCR/DVD

If you have a Dolby Digital or DTS receiver will] a Digital Input iack, connect an optical

digital cable (not provided) into the OPTICAL DIGITAL OUT iack on the TV/VCR/DVD

player and to the Digital Input iack on the back of the receivei: You must also set the

digilal output setting in the DVD setup menu (Chapter 5 has details). Also, check the

audio within the DVD Options menu to make sure it is set up correctly (Chapter 4 has

details).

Note: The illustration on the left shows a digital optical cable connection, If your receiver has a

coaxial Audio in jack, use a shielded (coaxial) video or audio cable with RCA plugs at both ends to

connect the coaxial digital jacks on the TV/VCR/DVD and the AN receiver,

lB. Connect the A/V receiver to the TV/VCR/DVD

Connect the A/V cables to an A/V (audio/video) receivei: Connect audio cables to the

TV/VCR/DVD's LINE OUT AUDIO (L and R) jacks and the other ends to the receiver's

corresponding Audio Input jacks.

Go to page 14