User's Manual

8
The antenna can be mounted either vertically or horizontally. To
mount it horizontally, simply rotate the arm clockwise 90
O
. Try different
positions for best performance.
90°
To adjust the antenna’s position:
1. Loosen the bolt on either end of the arm.
2. Move the arm or antenna to the desired position.
3. Re-tighten the bolt so that the antenna and arm stay fi rmly in
position.
6. Connect the coaxial cable to the antenna.
Connect the coaxial cable to the F-connector of the antenna as shown
here. Then cover the connector with the attached weather boot.
Note: If you’re using your own coaxial cable (i.e., not the one provided
with this antenna), make sure to affi x it to the outside of the mounting
base.