Installation Instructions

Find the best location for your
antenna
TV antennas perform best
when facing the direction
of the broadcaster’s tower.
For help nding your local
broadcast towers, go to
www.RCAAntennas.net
Antenna Placement Tips
Avoid metal surfaces (like a metal stand).
Move the antenna close to or in a window.
Position the antenna as high as possible.
Unfold the antenna
2
Place the antenna (2 options)
3
Scan for channels on your TV
6
DO NOT RETURN this
product to the store! Please
call our toll-free help line
at 1-800-768-1969 or visit
RCAAntennas.net
STOP!
Most TVs have a channel scan option in their menu
system, many times in a SETUP or CHANNEL menu under
ANTENNA. For detailed instructions on performing a
channel scan, see the owner’s manual that came with
your TV.
Open the antenna until it forms a straight line.
The antenna will click into place.
Option 1: Using the stand bracket
The Skybar Antenna has a stand bracket you can use to
place the antenna on a at surface.
Line up the stand bracket with the
holes on the back of the antenna.
Place the stand bracket on these holes
and lift up to lock in place.
Make sure your TV is turned
off. Then connect the antenna’s
coaxial cable to the antenna input
on your TV or digital converter
box.
Plug one end of the included
USB to mini-USB cable into the
amplier on the antenna’s built-in
cable.
Connect the antenna to your TV
4
Plug in the antenna’s amplier
5
Plug the other end of the
included USB to mini-USB cable
into the power adapter provided.
Then plug the adapter into a
power outlet or surge protector.
Note: If your TV has a USB power
outlet, you can plug the USB to
mini-USB cable directly into it for
power instead of using the power adapter.
Wall-mounting holes
The Skybar antenna offers two options for placement in
your home theater: either mounted to the wall or placed
on a at surface using the included stand bracket.
Versión
en español
al dorso
AMPLIFIED
indoor HDTV antenna
QUICK START GUIDE
1
Option 2: Mount to a wall
The Skybar antenna has wall-mounting holes on its back
spaced 6 1/8” apart.
To mount the Skybar to a wall:
1. Find where you want the center
of the antenna to be. Pencil two
locations for screws (not included) 6
1/8” apart.
2. Make sure the marks are level. Then insert two screws
(not included) into the wall at the pencil marks—leave
some space between the screw heads and the wall for
the antenna to mount.
3. Finally, place the antenna’s mounting holes over the
screws and gently push down to lock the antenna into
place.
ANT650 QSG 02