Installation Instructions

Step 5: Connect the reflector booms
to the front section
Find the two reflector booms and the front
section of the antenna. The two smaller
elements on the reflector booms face away from
the small section.
IMPORTANT: Unfold the elements on each
end of the reflector boom so that the front
of their locking tabs face towards each other.
The remaining locking tabs can be unfolded
in either direction. Make sure that all of the
elements are perpendicular to the reflector
boom.
Connect the two reflector booms to the front
boom using two of the provided #10 nuts and
screws. The reflector booms should be parallel
to the front section at this point.
Locking tab
Main Boom
FRONT