User's Guide
29
“I cannot
make
or
answer
calls”
If the
handset‟s display is
blank
,
it may have
been switched
off
.
Press
and hold the
HANG-UP
key to switch it
back
on.
Check
that the
base unit‟s main
power adapter
is plugged
in and power
is switched
on.
The base
unit
needs main
power for normal
operation
of the
phone –
not just for charging
the batteries.
Make sure
you are
using
the
telephone line
cable
supplied
with your
phone. Other telephone
line
cables
might not w
ork
.
Move
the
handset
closer
to the
base unit.
Check
the battery
level
symbol on the display.
If it
is
low
,
replace
the
handset
on the
base
unit
or
charger
pod to
recharge
the batteries.
S
witch off power at the
main
sock
et
,
wait for
a short time and then switch
back on. This
may
solve
the problem.
“I cannot
make
a call”
If the
handset display shows
KEYS LOCKED,
press
and hold the * button to
unlock
it before
you
make
a call.
Only one handset (or
the
base unit)
can be
connected
to the
outside line
at a time.
If another
handset is
already
using
the
line,
you
need
to wait until it
has finished
its call.
“When
I
press
on
the
keys,
nothing
happens”
Make sure
the
batteries
are fitted in your
handset
.
If the Battery
Level
symbol on the
display shows
„low
‟
,
put your
handset back
on
the
cradle
to charge.
“When
I key in a
number
,
it appears
on the
display,
but
I cannot
make
an
outside
call”
Try
a
different position
for the
base
unit –
somewhere higher
if
possible,
or further from
other
electrical
equipment
.
Try moving
the
handset closer
to the
base unit
.