Instruction Manual

Copyright © 2019 RCA Communications Systems
Prodigi
TM
RDR1520 Series Professional Digital Two-Way Radio Instruction Manual
18
Each alarm has the following default
setting:
Disabled: Radio cannot transmit alarm
signal, but can receive alarm from other
radios. Each alarm has the following types:
Regular: Radio transmits an alarm signal
and shows audio and/or visual indicators.
Silent: Radio transmits an alarm signal
without any audio or visual indicators.
There will be no response (call) from the
target radio until you press the PTT button
to initiate the call.
Silent with Voice: Radio transmits an
alarm signal and is able to receive an
incoming call, without any audio or visual
indicators, until you press the [PTT] button
to initiate, or respond to the call.
Initiating & Responding to Emergency
Alarm
To initiate an Emergency Alarm press the
programmed Emergency button. The LED
lights up solid red. After the alarm is sent
successfully depending on the setting
selected you can press the [PTT] to talk or
your radio’s microphone is automatically
activated, allowing you to communicate
with the other radio without pressing the
[PTT] button.
To Respond to an Emergency Alarm Press
any button to stop all Emergency Alarm
received indications. Press [PTT] button to
initiate a call with the emergency initiating
radio.
Exiting Emergency Mode
Your radio exits Emergency mode
automatically when any of the following
occurs: