User's Manual
8
Push 1. [16] momentarily to select Channel 16.
Push 2. [CH/WX] to return to the condition before selecting Channel 16, or
push [▲] or [▼] to select operating channel.
Convenient:
When the favorite channel function is turned ON, [▲]/[▼] keys on the micro-
phone select the favorite channels in the selected channel group in sequence
when pushed.
The favorite channels are set by the TAG channel setting. (P.10)
Channel 9 (Call channel)
Each regular channel group has a separate leisure-use call channel (Channel 9;
default). The call channel is monitored during Tri-watch.
Push and hold 1. [16] for 1 sec. to select the call channel of the selected chan-
nel group. “CALL” and call channel number appear.
Push 2. [CH/WX] to return to the condition before selecting call channel, or
push [▲] or [▼] to select a channel.
Weather channels
The transceiver has 10 pre-programmed weather channels. The transceiver can
automatically detect a weather alert tone on the selected weather channel while
receiving the channel or during scanning.
Push [CH/WX] once or twice to select a weather channel.1.
“WX” appears when a weather channel is selected.
“WX ALT” appears when the weather alert function is in use.
Push 2. [▲] or [▼] to select a channel.
Call channel programming
Call channel is used to select Channel 9 (default), however, you can program the
call channel with your most offer-used channel in each channel group for quick
recall.
Push 1. [U/I/C] (both [▲] and [▼] on the transceiver several times to select the
desired channel group (U.S.A., International or Canada) to be programmed.
Push and hold 2. [16] for 1 sec. to select the call channel of the selected chan-
nel group.
“CALL” and call channel number appear.
Push and hold 3. [16] again for 3 sec. (until a long beep changes to 2 short
beeps) to enter call channel programming condition.
Channel number starts blinking.
Push 4. [▲] or [▼] to select the desired channel.
Push 5. [16] to program the displayed channel as the call channel.
Push [CH/WX] to cancel.