User's Manual

4
While in the Set mode, push to select the setting or value of an item. 
Push to check TAG channels or change scanning direction during a 
scan.
[CH]9.
Hold for 1 second, one or more times, to select a channel group from 
USA, International, and Canada.
Push to return to the previous channel before selecting Channel 16 or 
the Calling channel.
ANTENA CONNECTOR10.
Connect the supplied antenna here. 
[DC 6V]11.
Connect the adaptor or optional cable her. 
NOTE: Attached the [DC] jack cap when the adaptor is not connect-
ed. Otherwise , water will get into the transceiver.
Dispaly

Icon Description
Transmit Indicator , Appears while transmitting
Low Power indicator
1) "LOW" appears when low power is selected
2) "LOW" blinks when switching forced low power mode
because of a high temperature arrow or low voltage
Appears while working in ATIS Channel
Appears when U.S.A
Appears when international
Appears when Canadian channel group is selected
Appears when receiving a signal or when the squelch
opens
Blinks while monitoring
Appears when a TAG channel is selected
Appears when the call channel is selected
Appears when the radio is charging
Battery Indicator, remaining battery power
Blinks while scanning
Appears while the lock function is activated
Appears when a duplex channel is selected
Appears when dual watch
Appears when tri-band watch
Channel number readout
Indicates the selected operating channel number
In set mode, indicates the selected condition
In dual watch/tri-watch,appears CH16 during priority scan
Appears while volume selecting
Appears while SQL selecting
Appears while mode selecting
Show the squelch level
Show the volume level
Blinks when the volume mute is activated