User's Manual

3
Pannel Description

PTT1.
Hold down to transmit; release to receive. 
CH 16/Call CH2.
Push to select channel 16. 
Hold for 1 second to select the call channel.(factory default: channel 9 ) 
When the call channel is selected, hold for 3 seconds to enter the call 
channel programming mode.
While in the set mode, push to return to the normal operation mode. 
FAV/TAG3.
PUSH to sequentially select to the favorite channels, while ignoring un- 
PANEL DESCRIPTION
tagged channel, in a channel group.
Hold for 1 second to set or clear the TAG for the display channel. 
While hold , turn ON the power to clear or set all TAG channels in the 
seteced channel group.
SCAN/DUAL4.
Push to start or stop a normal or priority scan. 
Hold for 1 second to enter the Dual/Tri-watch mode. 
Push to exit the watch mode 
Hold this key and HI/LO key for 1 second, to activate the AquaQuake 
Function.
[HI/LO]/[ 5. ]
Push to select the high or low output power. 
Hold for 1 second to turn the Lock function ON or OFF. 
POWER[ 6. ]
Hold to turn power ON or OFF. 
VOL./SQL/MONI7.
Push to enter the volume adjustment mode or the squelch adjustment 
mode.
Hold for 1 second to active the Monitor function. 
While hold this key , hold  [ ] key to turn ON the power and enter the
set mode.
While in the Set mode, push to select an item, 
While holding this key , push  [▼]to turn ON the Volume Mute function .
Do the same steps again to turn OFF the function.
While hold down this key, push  [▲]to turn ON the Volume Loud function.
Do the same steps again to turn OFF the function.
[8. ▲]/[▼]UP/DOWN
Push to select an operation channel. 