User's Manual

Table Of Contents

Recommendation



Clean the transceiver thoroughly with fresh water after exposure to saltwater,

and dry it before operating. Otherwise, the transceiver's key, switches and

controllers may become unusable due to salt crystallization.

NOTE:DO NOT submerge the transceiver in water if there is any reason to

suspect the waterproof protection may not be effective. for example, in cases

where the battery cover or DC Jack cap rubber seal is damaged,the trans-

ceiver/battery cover/DC Jack cap is cracked or broken , or the transceiver

has been dropped, or when the battery cover, antenna or DC Jack cap are

detached from the transceiver.

Features



Floats on Water 

The transceiver floats in fresh or salt water even when the supplied acces-

sories are attached.

When a third-party battery pack, strap, antenna, etc. is used , it may sink.

Floats and Flashes 

An LED sends out intermittent light from a transparent section on the bottom

of the radios, while floating in the water. As the LED light stands out in the

dark ( like a flashing fishing float), the radio can be easily retrieved from the

water. This function works even when the radios is turned OFF.