User's Manual

11
no signal is received, and no operation is performed for 30 seconds.
Dual/Tri-watch Function 
Set the watch type to Dualwatch or Tri-watch.
Monitor Key Action 
The monitor key temporarily opens the squelch. This item sets the key
action.
Pu(PUSH): The monitor function is activated by holding down  [MONI].
The squelch open while holding down the key.
Ho(Hold): The monitor function is activated by holding down  [MONI]
for 1 second, the squelch stays open until any key is pushed.
Automatic Backlighting 
This function is convenient for night-time operation. The backlight can be
selected from ON and OFF.
The backlighting is automatically turned OFF after 5 seconds. of in- 
activity.
LCD Contrast Setting 
Set the LCD contrast level to high contrast or Low contrast.
The LCD contrast level has little effect during indoor use. 
Power Save Function 
The power save function reduces current drain by turning OFF the re-
ceiver circuit for preset intervals.
OFF:  Function is turned OFF
ON:  Function is turned ON and will be activated when no signal is
received, and no operation is preformed for 5seconds.