User's Manual

10
Set Mode Programming

The set mode is used to channel the settings of transceiver's functions: beep
tone function, priority scan function, scan resume timer, auto scan function,
dual/tri-watch function , monitor key action, automatic backlighting, LCD
contrast setting and power save function .
Set Mode Operation 
Turn OFF the power.1.
While holding down 2. [VOL/SQL],turn ON the power to enter the set
mode
Release 3. [VOL/SQL], appears " Bp "
Push 4. [VOL/SQL]to select a desired option of the item.
Push 5. [▲][▼]to select a desired option of the item.
To exit the set mode, push 6. [16/C]
No. Show Set Project
Set parameter
options
The default
value
1 bP Beep of /on on
2 AL Weather Warning of /on of
3 Pr Priority Scan of /on of
4 St Scan Resume Timer of /on of
5 AS Automatic Scanning of /on of
6 dt Dual-band / Tri-band Duty d-/t- d-
7 Sq Monitor key Functions Pu / Ho Pu
8 bL Automatic Backlight of /on on
9 LC LCD Contrast Hi / Lo Hi
10 PS Automatic Power of / on on
SET MODE
Set Mode Items

Beep Tone Function 
Turn the key touch beep sound ON or OFF.
Weather Alert 
When there are significant weather information , the U.S. NOAA broadcast
stations will transmit an alarm weather . When the weather alert function is
turned on, walkie-talkies will sound the alarm at the same time "WXALT"
symbol flashes. During the scan , the current weather channel in use will
be scanned .
With this function enabled , when you select the Weather Channel , 
the screen displays "WX ALT" symbol.
Priority Scan Function 
The transceiver has 2 scan types—normal (OFF)and priority (ON )scan,
A normal scan searches all TAG channels in the selected channel group.
A priority scan sequentially searches all TAG channels while monitoring
Channel 16.
Scan Resume Time 
The scan resume timer can be set as a pause (OFF) or timer scan (ON).
OFF:  when a signal is detected, the scan pauses on the channel until
the signal disappears, and then resumes.
ON:  When a signal is detected, the scan pauses on the channel for 5
seconds. and then resumes.
Auto Scan Function 
The auto scan function automatically starts a normal or priority scan when