User's Manual

Copyright © 2012 Discount Two-Way Radio Corporation - North American Distributor
BR850
TM
Professional Two-Way Radio Instruction Manual
12
Wired Clone Source radio: Turn the source radio on while
holding down the PTT and SK2 keys.
Target radio: Rotate the Radio On-Off/Volume
Control knob clockwise to turn the target radio
on.
The LED ashes orange
twice.
Source radio (power on the target radio and
connect the cloning cable, and then press the
PTT key of the source radio to initiate cloning.)
1. The LED solidly glows red
during cloning;
2. The LED goes out when
cloning is nished.
Note: The LED ashes red
when cloning fails.
Target radio 1. The LED solidly glows
green during cloning;
2. The LED goes out when
cloning is nished.
LED Indicator
The following tables explain the functions of the LEDs and beeps.