Warn Wired Winch Manual V4

Warn

WarnWinch

Winch

WinchInstruction

Instruction

Instructionmanual

manual

manualWired

Wired

1.Connectthewinchplugintothewinch/controlboxplug.

2.Plugwinch/controlboxplugintocontrolboxmarkedW+/W-.

(CheckDirectionofyourwiresandplug,Red+,Black-)

3.ConnectthereceiverwiretothecontrolboxmarkedB+/B-.

(CheckDirectionofyourwiresandplug,Red+,Black-)

PAGE 1
Warn Winch Instruction manual Wired 1. Connect the winch plug into the winch/control box plug. 2. Plug winch/control box plug into control box marked W+/W-. (Check Direction of your wires and plug, Red +, Black -) 3. Connect the receiver wire to the control box marked B+/B-.
PAGE 2
Warn Winch Instruction manual Wired 4. Connect the other end of the receiver plug into your receiver's third channel. (Check Direction of your wires and plug, Red +, Black -) Your third channel needs to be a three position switch in order to fully operate the winch properly. 5. Fully install your ESC and other electronics, plug in your battery and test out your new winch.