Gelande II 1_18 RTR Manual

XR2 Micro Radio
Step 4. Binding the Transmitter and Receiver
Step 6. Transmitter Adjustments
Turn on the receiver power. Press the SW switch.
The receiver’s LED should start flashing.
Turn on the transmitter.
When the LED on the receiver becomes solid,
the binding process is completed.
WARNING: 1) Keep the transmitter and receiver
40cm apart when operating.
2) Do not operate the radio system when the
battery power is low.
A. Throttle Trigger
Speed Up
Slow Down/
Reverse
Left
Right
Neutral
B. Steering Wheel
1. Push the trigger to the center position to stop.
2. Pull the trigger back to accelerate.
3. Push the trigger forward to go in reverse.
Turn the steering wheel to
the left or right to let the vehicle
turn left or right.
Neutral
1/18 Gelande II Scale RTR Truck
6