Gelande II 1_18 RTR Manual

Time to get your new truck setup and running
Step 2. Read the instructions
Step 4. Installing the Batteries
Remove the battery cover and install 4 new
RC4WD AA batteries in the transmitter.
Replace the battery cover.
Warning: LED will flash when the battery
is low. Replace immediately.
Step 5. Remove RC4WD D90 Body
Use the 2mm Hex Drivers, remove the four
screws from the underside of the truck.
Carefully remove all items from the box.
Take care when pulling the truck from its
tray as it may damage it. Be careful when
removing the truck as it can easily fall out
of the packaging.
Remove the battery and charger and read
through the charging instructions as the
battery will need to be charged before
you can use your new truck.
Step 1. Remove all items from box.
18
1/18 Gelande II Scale RTR Truck