/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Recommended Tools Hex Drivers (1.5mm, 2mm, 2.5mm) Thread Lock 4mm 5.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Instruction Manual Symbols Key Apply Thread Lock Apply Grease Remove Trim with Hobby Knife CA Glue Build Right and Left Cut with Scissors Repeat or Build Multiple Build Front and Rear Paint Attention Tips for Assembly Use good quality hex drivers to avoid stripping screw heads. Open kit bags in order of assembly steps. Use “Step” index for quantity and size of hardware to be used for assembly step. Do not overtighten screws.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set BATTERY CHARGING 1. Only charge batteries that are cool to the touch and are not damaged (swollen, bent, broken or punctured). 2. Connect the charger to the proper wall receptacle noting proper polarity. 3. Plug the battery’s connector into the charger’s connector. The LED will light red as it is charging. 4. The charger will emit a tone and the LED will change to green once fully charged.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Failure to follow instructions associated with this symbol risks injury or even death! Avoid battery liquid contact with skin and clothing. If contact occurs, remove contaminated clothing and wash skin thoroughly with water. Before Use: Read and understand the battery and charger operating instructions before recharging. NEVER place a battery into water. ONLY use genuine charger unit for recharging brand NiMH batteries.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set RC4WD Outcry II Waterproof ESC BASIC SPECIFICATIONS Type Brushed Motor ESC Model Z-E0089 Specification Lipo 1/10 Electric ESC NiMH (1.2V/PCS) BEC Output Voltage (V) - Current (A) Max Length (mm/in) 4-9 PCS ESC 2-3S 5V/2A 45.40mm [1.79in] Max Height (mm/in) 24.70mm [0.97in] Max Width (mm/in) 33.60mm [1.32in] Output Current Continuous working current is 45A, Forward steps are 320A, Backward steps are 160A.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set INSTRUCTIONS Product Features and Characteristics I. NiMH/Lipo Option BATT BATT Lipo NiMH II. Drag Brake/Standard Option TYPE TYPE DRAG BRAKE STANDARD III. Micro Controller (MCU) Automatic Learning Center Point WARNING: Prior to proceeding, be sure to either remove the pinion from the motor or elevate the truck so the wheels are not able to touch the ground. 1. The CPU can automatically sense if it is at its center point.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set 3C Transmitter / Radio Step 1. Transmitter and Receiver Overview 2.4G ANT TH REV ST REV TH TRIM ST TRIM Connectors 1: Steering Servo (CH1) 2: Throttle Servo (CH2) 3: CH3 Servo (CH3) 4: CH4 Servo (CH4) B/C: Power Connector STEERING WHEEL TH EPA ST EPA POWER SWITCH 3CH EPA TRIGGER CHANNEL 3 SWITCH GRIP HANDLE FAIL SAFE SET D RC4W BATT BOX Step 2. Receiver and Servo Connection Step 3.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set 3C Transmitter / Radio Step 5. Fail Safe Function Settings Step 4. Binding the Transmitter and Receiver 1. Turn on the receiver power. Press the SW switch. The receiver’s LED should start flashing. 1. Set the TH, ST switches to the norm position. 2. Turn on the transmitter and receiver. 3. Press the F/S SET button, the LED on the receiver should start flashing rapidly. 4. Put the throttle trigger in the break position, press the F/S SET button.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Marlin Crawler RTR Electronic Manual This is a step by step overview of your new Marlin Crawler RTR electrical items and how they connect. 1. Outcry II Waterproof ESC (Z-E0089) 2.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set 3. This shows the ESC to radio’s receiver (Z-R0008) connected to the CH2 port 4. Connect the servo (Z-E0035) to the radio’s receiver Channel 1 (CH1) This controls the truck's steering from the radio.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set 5. Shows the battery (Z-E0090) connected to the ESC 6.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 1 Z-S0651 X4 Z-S0651 M3 x 6mm BHCS Z-C0018-3 Z-C0018-1 Z-C0018-2 Z-S0651 Step 2 X4 Z-S0652 M3 x 8mm BHCS Z-S0047 Z-S0047 1 Z-S0652 Z-S0652 1 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 3 Z-S0596 X2 Z-S0654 M3 x 12mm BHCS X2 Z-S0655 M3 x 14mm BHCS Z-B0029 Z-S0654 Z-S0655 Right side frame rail shown. Step 4 X4 Z-S0275 Z-S0629 M3 Black Lock Nut X4 Z-S0275 M3 x 15mm Shoulder Screw Z-S0275 Z-S0047 Z-S0629 Z-S0047 Z-S0629 2 Left Rock Slider will be installed at Step 8.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Z-S0653 Step 5 X1 Z-S0798 Z-S0652 M3 x 8mm BHCS X2 Z-S0653 M3 x 10mm BHCS Z-S0652 Z-C0018-5 Z-C0018-4 Step 6 X2 Z-S0652 M3 x 8mm BHCS Z-S0652 Z-S0654 Z-C0018-8 X2 Z-S0654 M3 x 12mm BHCS Z-C0018-6 Z-C0018-7 3 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Apply medium grade thread lock on all screws threading into metal.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Z-S0678 Step 9 X2 Z-S0652 M3 x 8mm BHCS Z-S0678 Z-S0652 Z-S0652 Step 10 Z-S0649 Z-S0649 X4 Z-S0649 M3 x 8mm FHCS 5 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Z-S0649 Step 11 X4 Z-B0029 Z-S0649 M3 x 8mm FHCS Z-S0649 X2 Z-S0651 M3 x 6mm BHCS X2 Z-S0655 M3 x 14mm BHCS Z-S0651 Z-S0655 Step 12 Bumper Mount #2 X2 Z-S0648 M3 x 6mm FHCS Z-S0648 Z-S0593 Z-S0648 6 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 13 X2 Z-S0649 M3 x 8mm FHCS Z-S0649 Z-U0024 Step 14 Z-S0518 Z-S0653 Z-S0653 X4 Z-S0653 M3 x 10mm BHCS Z-A0058 Z-S0518 7 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 15 Z-S0518 Z-S0653 Z-S0653 X4 Z-S0653 M3 x 10mm BHCS Z-A0061 Z-S0518 Z-S0275 Step 16 X4 Z-S0275 M3 x 15mm Shoulder Screw Z-S0275 Z-S0629 X4 Z-S0629 M3 Black Lock Nut Z-S0629 Z-S0275 8 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Z-S0275 Step 17 Z-S0629 X4 Z-S0275 M3 x 15mm Shoulder Screw Z-S0275 X4 Z-S0629 M3 Black Lock Nut Z-S0275 Z-S0629 Step 18 X2 Z-S0648 M3 x 6mm FHCS Z-S0006 Z-S0648 Z-S0648 9 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 19 Z-S0629 X4 Z-S0656 M3 x 16mm BHCS X4 Z-S0806 Z-S0629 M3 Black Lock Nut Z-S0656 X2 Z-S0806 M3 X 3mm Spacer X2 Z-S0600 M3 X 2mm Spacer Z-S0629 Z-D0012 Z-S0600 Z-S0656 Z-S0809 Step 20 X2 Z-S0654 M3 x 12mm BHCS X2 Z-S0654 Z-S0656 M3 x 16mm BHCS X2 Z-S0600 M3 X 2mm Spacer X2 Z-D0012 Z-S0809 M3 X 1mm Spacer Z-S0600 10 Z-S0656 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 21 X1 Z-S0804 M3 Drive Shaft Pin Z-S0804 Z-S0599 Step 22 X2 Z-S0652 M3 x 8mm BHCS X2 Z-S0649 M3 x 8mm FHCS Z-S0652 Z-S0677-1 Z-S0677-2 11 Z-S0649 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Z-S0653 Step 23 X3 Z-S0653 M3 x 10mm BHCS Z-S0653 Step 24 X1 Z-S0804 Z-S0804 M3 Drive Shaft Pin 12 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 25 CORRECT ALIGNMENT INCORRECT ALIGNMENT Please check alignment when installing your drive shafts.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 27 X2 Z-S0651 Z-S0651 M3 x 6mm BHCS X1 Z-S0124 M3 x 3mm Set Screw Z-S0124 Z-S0651 Step 28 Z-S0601 (60mm) X4 Z-S0308 M3 x 10mm Set Screw Z-S0398 Z-S0308 Z-S0401 Z-S0308 Z-S0308 Z-S0398 Z-S0308 Z-S1836 (101mm) Z-S0401 14 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 29 X2 Z-S0653 M3 x 10mm BHCS Z-S0653 Z-S0653 Step 30 X2 Z-S0653 M3 x 10mm BHCS Z-S0653 15 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 31 Z-S0629 X1 Z-S0655 M3 x 14mm BHCS X1 Z-S0629 M3 Black Lock Nut Z-S0655 Step 32 Z-S0652 X4 Z-S0652 M3 x 8mm BHCS Z-S0652 16 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 33 Z-S0652 X1 Z-S0652 M3 x 8mm BHCS Step 34 X2 Z-S0650 Z-S0650 M3 x 15mm Set Screw Z-S0650 Z-S0595 17 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 35 Z-S0650 X2 Z-S0650 M3 x 15mm Set Screw Z-S0650 Z-S0594 Step 36 X6 Z-S0652 M3 x 8mm BHCS Z-S0652 Z-S0652 Z-S0652 18 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 37 Z-T0143 Z-W0225 Ensure the front and back wheel spokes align with each other Step 38 19 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 39 Z-S0828 X24 Z-S0828 M2.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 41 Z-S1759 X80 Z-S1759 M1.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Step 43 X4 Z-S0652 M3 x 8mm BHCS Z-S0652 Z-S0652 Z-S0652 Step 44 Z-B0016 22 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set 23 23 23 Trail Finder 2 RTR w/Mojave II Crawler Body Set
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Replacement Parts Z-S0798 Front Shock Hoops for Gelande 2 Chassis Z-S0802 R3 Single Speed Transmission Mounts Z-S0006 Aluminum Bumper Mount For Trail Finder 2 Z-S0898 TF2 Long Drive Shaft Coupling for R3 Single Speed Z-U0024 Hammer Transfer Case (1.47/1) Z-S1836 Drag Link for Yota II (101mm/3.
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set Optional Parts Z-S1239 Trail Finder 2 V8 Engine Mounts Z-S1488 RC4WD Skid Plate for Trail Finder 2 V8/R4 Z-S1486 RC4WD Rock Krawler Replacement 3/4 Link kit for Trail Finder 2 Z-B0032 Scale Bench Seat for Mojave Body Z-S0190 Scale Plastic Driver Figure Z-S0603 4 Link Kit For Trail Finder 2 Rear Axle Z-S0565 3 Link Kit For Trail Finder 2 Front Axle w/Panhard Setup Z-S0342 XVD Axle for Ultimate Scale Yota TF2 Axle Z-S0196 Scale Aisin/Yota Style Hubs Z-S077
1/10 Trail Finder 2 RTR w/Mojave II Crawler Body Set VVV-C0400 VVV-C0424 VVV-C0425 VVV-C0290 VVV-C0291 VVV-C0292 VVV-C0293 VVV-C0208 VVV-C0212 VVV-C0211 VVV-C0206 VVV-C0209 VVV-C0213 VVV-C0215 Steering Guard for Trifecta Front Bumper Malice Mini Roof Rack for Mojave II Body Set Malice Mini Roof Rack w/Lights for Mojave II Body Set Metal Rear Emblem for TF2 Mojave Body (White) Metal Vintage Rear Emblem for TF2 Mojave Body (White) Metal Rear Emblem for TF2 Mojave Body (Black) Metal Vintage Rear Emblem for T
www.rc4wd.com 618 Blossom Hill Rd. Ste. 201 San Jose, CA 95123 Web: www.rc4wd.com - Email: support@rc4wd.
