LWB Trail Finder 2 RTR manual

RC4WD TF2 LWB RTR
x
RC4WD USA 100-0012
3C Transmitter / Radio
Step 4.
Transmitter Adjustments
Step 5.
Step 6.
Fail Safe Function Settings
Binding the Transmitter and Receiver
1. Turn on the
receiver's power.
Press the SW switch.
The receiver’s LED
should start flashing.
2. Turn on the transmit-
ter.
3. When the LED on the
receiver becomes solid,
the binding process is
completed.
LED
1. Set the TH, ST switches to the normal
position.
2. Turn on the transmitter and receiver.
3. Press the F/S SET button, the LED on the
receiver should start flashing rapidly.
4. Put the throttle trigger in the brake
position, press the F/S SET button. The LED
should become solid.
5. For Electric Model, put the throttle trigger
in the stop position when you are adjusting
the setting.
WARNING: 1) Keep the transmitter and receiver
40cm apart when operating.
2) Do not operate the radio system when
the battery power is low.
A. Throttle Trigger
Forward/
Speed Up
Brake/
Speed Down
Left
Right
Neutral
B. Steering Wheel
1. Push the trigger forward to slow down or
brake.
2. Pull the trigger backward to accelerate.
Turn the steering wheel
to the left or right to let
the vehicle turn left or
right.
Neutral